DSL40CR with 1922 ext cab - my.marshall.com

All Questions

DSL40CR with 1922 ext cab

Looking for the best way to run a 1922 ext cab rated for 8ohms and use together with the internal 16ohm speaker. Can the speaker outputs be mixed? i.e. 16ohm speaker to the 8ohm output and 8ohm cabinet to the 4ohm ouput to achieve 5.33 load?

Speaker

edited 08 Apr 2019 at 12:42 AM

asked 07 Apr 2019 at 09:14 PM

Answers: 2

Hello Chris,

Due to the impedance mis match we do not recommend this, you can use the DSL40CR with 1922 if you unplug the internal speaker.

Kind Regards

Marshall Support

answered 09 Apr 2019 at 07:08 AM

I received this answer at MarshallForum.com?
There is a thread on here where santiago specifically mentions this with ANY amplifier that has multiple outs as opposed to a switch. This is why it is NOT a mismatch and why you aren't running 5.33 ohms total. You are running 16 on the 8 and 8 on the 4 which is completely fine.
He said the manuals are worded as above to make it less confusing. But this is completely fine. - 09 Apr 2019 at 08:04 PM

Yes. I was told that is not a mismatch.

0

edited 08 Apr 2019 at 12:42 AM

asked 07 Apr 2019 at 09:14 PM

0

answered 09 Apr 2019 at 07:08 AM

0

answered 10 Apr 2019 at 07:53 PM