Can't seem to find anywhere here in the States that sells just this - I'd settle for the inductor that blew! - Right now I just have it by-passed (the Inductor- 250uH, if it is the same as on the MG100HDFX) - For anyone who may be interested - the sympthoms that lead me to find the issue was: excessive noise when a straight 1/4" guitar cable was inserted (without a guitar attached) With a guitar straight in the noise was still present but the guitar could be heard behind the noise as if nothing was wrong... the only thing that I know prior to the issue was having the amp on and then connecting an iPad via a iRig2 to the amp - Of course, not the correct approach but it happens - TURN yer AMP OFF before plugging in any devices - once connected then turn it on as long as the inputs on the devices are turned down prior to turn it back on - this way you can roll up the volume to make sure everything is OK -
Anyway, please assist in helping me locate a replacement input Jack!
Hello Ed,
Our distributor in the USA is Jam Industries USA (USA Music Corp) their contact number is 800-877-6863 if you contact their spares department they will be able to supply you with the part.
1 more question - when I have the AMP in question connected to a power filtered AC power socket, I still get way more noise than my Line6 Flextone II without a cable connected - there is no Fluorescent Lighting or other EMF or RF Electronics connected or near the AMPs - Is this AMP inherently noisy? if so any other remedies that I could try to lessen the noise? - Nashville Ed Stefanov 09 Sep 2016 at 05:07 PM