New to the Code. Tryin to navigate the website some.
Question about user uploaded preset settings.
At the bottom of the setting description, I've noticed many times there will be an icon or pic of a Marshall cabinet with a red X thru it. My guess is that it means the cabinet simulation is turned off..??
Any clarification would be greatly appreciated.
Hello everyone, I own the Marshall CODE 100H and CODE 212 cabinet.I really love this amp, but I find the MY GATEWAY web page interface to be somewhat awkward to use. The following are issues that I would like to see changed.
1) On the My GATEWAY web page, the preset list at the top is arranged by columns (as it should be), but the MY LIBRARY list below that is arranged by rows.
2) There is no indication in the MY LIBRARY section on the MY GATEWAY tab whether a preset is or isn’t in the MY GATEWAY list.
Hello everyone from Portugal,
List of factory presets for CODE 100H head. From 2019, the presets are different than combo models. Rig info: the CODE 100H head and 4X12 cabinet.
My question is concerning the Code 100H. When using an external cabinet, is it better to use the preset power/cab selections or to turn them off. Does this apply to the Marshall code cabinet and any other cabinet, or just to a different cabinet ie: 2x12 Morgan ? Thanks.
I was wondering if the creator of the KASHMIR preset would be interested in also creating the FLANGER part for KASHMIR using all the current preset settings (amp, cabinet, speaker etc) as a complimentary preset for the turnaround section of the song. I believe, from forums, that a preset will switch better (Marshall CODE footswitch) if the preset has the same amp, speaker and or cabinet setting as it takes away the millisecond delay of switching between amps in a particular preset. Look forward to your answer and or creation of said beasty.
I have a Marshall Code 50. Not sure what’s happened but when I plug my guitar into it, I get no sound and the presets are now being controlled by the guitar volume knob. If guitar volume is full high, display on the Code quickly scrolls thru presets. If guitar volume is full low, you can individually scroll thru presets by quickly turning volume knob up then quickly back down. No volume from cabinet regardless of preset volume or master volume, only static. Have tried with both electrics I have and both cables, in various configurations with no difference.
Any help is greatly appreciated.
I'm a beginner. I've experiemented with all the presets of my CODE50. It's an amazing amp/speaker combo. However, I would like to have a better understanding of what the switch and 4 knobs do on my Epiphone Les Paul, apart from all the amazing things that the CODE50 can do. This would seem to require that I set the CODE50 to work as a "pure amplifier," solely increasing the volume of the guitar output, without adding any effects to modify/model its output. Can I achieve this by doing the following using the iPhone app?
Turn to Pedal 1 preset (and not use a pedal)
Keep Pre-Amp at Natural
Turn Power-Amp and Cabinet off
Turn all FX off
I have a code 100H connected to a 4x12 cabinet. I want to use my Boss ME-80, as I have stored a number of presets. I have plugged my guitar into the ME-80 and the ME-80 into the input of the amp, however the volume of the amp is significantly decreased, I have turned the ME-80 volume up to max with little affect, I have also turned all the FX on The code 100H off. The volume is very poor, worse with my Gibson SG, than with my Fender Strat. Is there a better way to set up my ME-80, e,g through the FX loop, and how would I do it. Would this solve the problem?
I'm running a Code 100h head through MG 4x12 cabinet. This set up is load at home, but a band rehearsal I can hardly be heard above the drums and bass.
That's with the patch volumes on 8-9 and master volume around 8-9 also.
Do I need to look at noise gate settings, presence, resonance etc or just put an EQ pedal in front of it?
I've heard others say that they gig regularly with the Code 100 without any issues.
Hello guitar players,
today I got my new Code 100 head and connected it with my 2x12 speaker 1936 from marshall. I tried the presets and they sound very cool but the sound is in my opinion a little bit to muffled and not clear enough.
So I kicked out the cabinet in the settings and then the sound is very clear and cool for me. But whats exactly the sense of the cab when it sounds not good in my opinion. Do I really need them?
Thanks for your answers! :)
Hello, I know this has been covered here and I have read all of the messages, but I would like some newer feedback regarding my newly purchased DSL40C implimented with a Line 6 POD 2.0.
I realize you can't shut off amp modeling and that to achieve the least amount of colorization, and preserve my Marshall tone as much as possible, I should set the POD 2.0 to Tube Preamp, and EQs to 12 o-clock, which shuts off Cabinet Simulation. I want to use the POD 2.0 because it has a bunch of presets I use, which I will modify and it gives me multi effects with a Pedal.
How should I route this, given the effects send on the DSL40C is probably line level, and has no attenuator. The POD 2.0 has instrument in and I presume Instrument out. I know it will run -10 and +4 when using TRS. I will say I don't see any documentation on the DSL40C loop.
This is my first Marshall setup and need advice from you gurus.
Any and all advice is appreciated.
Thanks so much!