I just recently got the Monitor 2 headphones and everything is fine when I connect it with my Phone. But when I connect it on my PC via bluetooth and play something on Youtube, output sound is like choppy but when I connect it via cable sound is very clear. May I know if anyone encountered this and have any solution.
When I connect my Code 50 to my PC via USB, it only plays the left audio of music but not the right audio. This problem does not persist when connected via Bluetooth to my phone.
So as the name suggest i have connection problems. I had some other problems with phone connection also but that was solved with a hard reset of the headphones. But it didn't solve the problems with my laptop. So the headphones do connect to the pc and work fine but after an hour of use the make a loud beep sounds and turn off for no reason. If i turn them on again they instantly connect back to the laptop and continue working like before. Is there a program or drivers installer for the windows to fix this? Becouse i dont want to change my brand new headphones and wait for the new pair?
Hey you guys ! Still loving my Code, for light rehearsals and mostly direct into my recorder! Any chance of Gateway for Windows PCs? I dig using my Code direct to my computer Studio, and it would be cool to have the Gateway on the big screen as well! Just wondering.
How do I set my Code 100 up to record on windows and what is a user friendly software to use.
Thanks a mil!
Why don't you have a Windows App? For me (and I believe for many other users) is really annoying to control my Marshall Code using cellphone or mini tablets.
I really think it would be very welcome an App for Windows, so we could use our notebooks or lap tops to control presets and tone of our Marshall amps, under a better interface, bigger screen and together with other music software.
Otherwise, I am very satisfied with my amp.
I have a Code 25 and a windows 10 computer and I have tried everything and I can not get the amp to connect to my computer via USB. Does anyone know why? If anyone knows why please help!!!
I just want to check with fellow CODE users if they are facing the same issues that I am dealing with.
Biggest (and most annoying) issue is, it's a matter of luck connecting the CODE through USB. 2 times out of 10 my pc recognizes the amp the first time I plug it in. Mostly it gives an error that device is not connected properly or not recognized by windows. So I end up unplugging and plugging again until (if ever) it's been recognized. (Using windows 8.1 btw) Then suddenly in the middle of a recording session my DAW starts to drag like if I am running on a PC Pentium 600. (It's running on a 3000$ alienware) This is a sign that somehow CODE get disconnected itself. Now you have only option left: Restart the PC and start all over again.
So far I have checked with different USB cables, and I am using the shortest ones as possible as I can. (less than 80 cm.) I can't check with another pc since I don't have another one, but I am running Yamaha THR-10 smoothly, without any problems at all!
So I don't believe that there's an issue with my pc. And speaking of THR, why the hell CODE doesn't have it's dedicated USB drivers. I am kind of sure that the issue I am facing is all about the ASIO drivers that we are left with as an only option.
Second issue is, maybe only 1 out of 20 times I am able to get any presets from web site. Even if it looks like CODE is connected in the Device Manager, and the Chrome (or Opera) says MIDI is connected, I can't send any presets to the amp. After a few tries, this ends up with web browsers got frozen and only option is again: restart your pc!
I really would like to hear from people who are facing similar issues and how they could get over with it. (if they ever could)
And hopefully the only answer I receive from Marshall team is not going to be: "Thanks for your feedback, we will pass this to our technical team"
I bought a CODE 25 amp and I can’t connect with any computer, I have tried with 2 different cabes and some differente OS: Windows 7, 10 and macSierra. I was thinking to update the firmware but, I can do that because the amp is unable to be recoginized by a computer!
It`s really frustrating!
Hello, yeah just checking in to see if firmware updates are working for some cause I have had no luck at all with Win 10, or in Chrome. Downloaded update firmware and it just keeps sayin connect your amp with usb and I do? But nothing happens. I have the 25 and the 50 since they came out and it is April 2nd 2017... Just curious what is up and am I missing anything with these firmware updates?
Alrighty Thanks Tony K.
I just recently got a nice Code 25. And I am trying to record the sound through USB with Sonar Producer 8 in windows 10 OS. However, Sonar wont recognize Code. There are 3 options for audio devices in Sonar, which is MME, WDM KS and ASIO. When it switched to ASIO, Code is not shown at all, but when switched to either MME or WDM, Sonar tells me error in the Code USB driver with 2 options, "disabled" or "use anyway". And if I choose use anyway, Code will be shown but can not be selected as input for audio channel.
Checked the support from Sonar, Marshall Code has not listed in their support/download site.
Here is the address : www.cakewalk.com/support/hardwaresetup.
Anybody has solution for this?
Note : No problem at all for playback from windows to Code. Only problem for recording.
Any help or opinion will be appreciated.
I have a question on the Marshall Code 50 amp. Is it possible to connect the amp with a usb cable to a pc (Windows 10) and be listening to anything on the pc's soundcard, YouTube, media player, etc. and play guitar through the amp at the same time?
Has anyone had any success in using the CODE 50 with Propellerhead's Reason DAW via the USB connection?
My Windows laptop recognizes the CODE 50 when I hook it up, but Reason doesn't recognize it as a valid audio input that I can record from. I'm thinking it may be an ASIO issue. I know I can just run the headphone out of the CODE 50 into my Focusrite audio interface, but I was just curious about the USB option.
I've been recording on garageband and other softwares for a long time already!
However, I've bought this (crappy) amp to record via USB on these DVAs I'm used to work with. SO, aparently, after questioning people who uses the same amp, and here on the forum, NOBODY could explain the real reason why this "amp" won't work for recording via usb!
The TWO computers I use (macbook and PC - windows7) reconize the amp, however NO SOUND AT ALL are recorded!
I am familiar with LINE 6 products and I use them a lot. No problem at all with this gear! But MARSHALL, the most famous brand of amps on the world, releases an amp promising to do something they aparently are not able to!
Lame amp! recently bought and, hopefully, recently SOLD! Waste of my time and money!
I was looking forward to using the Android app with my new amp but when I go to the Google Play store my device is telling me that the software version on the site isn't compatible with my device. I am running Android Marshmallow on a LG Escape 3 (http://www.mylgphones.com/lg-escape-3-lg-k373-user-manual-guide.html). I looked it up and it appears that Marshmallow is beyond the kit kat OS. Is the processor on this phone too weak? Too little ram (I have a sd card installed in addition). Is there a compatibility list? Do I need to install a different OS version or possibly need a different version of the app?
I'd love to be able to run this on my Windows 10 yoga thinkpad tablet... any news on whether a version for Windows is planned? Anyway, thanks. If my phone can't run it I'd like to find something that can on the cheap, a list would be great if that's my only option.
I downloaded the firware update utility program but when I run it I get an error messsage. It says an app on my PC needs the following Windows Feature: .NET Framework 3.5 (Includes Net 2.0 and 3.0) So Itried to down load this feature and I got an Error Code. 0X800F081F. I looked up the code and it says you can not install on a computer running windows 10. So the Firmware Update Utility Porgram will not install?
So I cant install Code Firmware Update if I use Windows 10?
I am using Garageband 11 on a macbook 10.7.5. Garageband shows code as audio in and out but no sound goes in or out of Garageband. I also have Audacity with the same problem? I have updated firmware with Windows only? app.
I read some of the recent questions on the code lockup problems and your answer says that a new firmware update is released for this problem but when i downloaded the update and i checked the file version in windows it was the same as a previous file version i downloaded over a month ago?
File version 14.0.23107.0
Is there any way to reduce the wattage on the code 50. 50 watts is tremendously loud and I can not get the "sweet spot" with out rattling the windows. I know the alternative is the CODE 25 but I am hesitant with the 10" speaker. Any suggestions?
I just got Marshall JTM30 110V
How to convert JTM30 110v to 230v ?
I heard just simply switching some wires ... would work..
but I do not know how to...