Questions
Showing results 1 to 13 of 13
0

votes

3

answers

18

views

Hi! I have an issue while trying to transfer dowloaded presets to my Code25. It occures both usb and bluetooth connections.  On a usb connection i click the “amp” icon on a preset, it’s name appears on a Code screen. I push and hold store button on amp, “saved” appears. But then Code becomes freeezed, it does not react on button push etc. when i switch it off and then switch on it works fine, preset available on amp. The same issue appears when i try to transfer presets using Gateway app. What I do wrong?

CODE Gateway Bluetooth Presets USB

edited 20 Aug 2019 at 05:44 AM

Alexey Kornilov

asked 20 Aug 2019 at 05:43 AM

Alexey Kornilov
0

votes

1

answer

81

views

On my Android device Samsung Galaxy 8+, Software version G955USQU5DSDA.  The Gateway crashes whenever I attempt to import music.

On my iPad Pro  (9.7-inch), Software version 12.3.1,  The Gateway refuses to load music.

Any help, clarification, or a suggestion of a solution, (is there a particular program that works well to assist the import of music into this app on either platform)? 

I also have a PC running WIndows 10 Pro x64, with an i7 and 32GB of RAM, is there any work around involving any particular DAW that allows this?

 

 

 

CODE Gateway iOS Android USB

edited 28 Jun 2019 at 07:10 PM

James R Jacobsen

asked 12 Jun 2019 at 10:40 PM

James R Jacobsen
0

votes

1

answer

260

views

I know I can override any CODE amp preset with CODE USB connections from the website or by changing on my phone while connected and saving either on the phone and/ or amp.  But How do direct amp changes work with Gateway while disconnected and then synced later on?

 In other words, if I save modifications on my amp to a particular preset and I am not connected to my gateway on my phone, when I do connect and sync later, which setting wins?  Does the phone setting override the amp-stored setting (ie. back out the mods made on the amp / push the settings to the amp from the phone) or does the phone pick up the modified amp setting from the amp and store it in Gateway (ie, pull the settings from the amp and store in my phone)?  

Also, I have the first 30 presets set up for ones I use to perform and are addressable using code programmable foot controller.   If I want to archive/backup those presets someplace to guard against an unplanned need to do a factory reset, does it make sense to store them perhaps in the cooresponding setting in my Library ( the blue section of My Gateway )  That way i can bring them into the amps and store them one at a time from the library back into the presets on the amp, or is there a better way to backup/restore presets in the event of a factory reset?

Thanks!

 

 

CODE Gateway Presets USB Sync backup

asked 07 Jan 2019 at 06:20 PM

Stephen Sterner
1

vote

0

answers

162

views

1) Bought Code new, when released, USB port was loose and wont connect. Cant do Firmware or recording via USB. How to get service?

 

got at Guitar Center San Mateo Ca. When first released, hadn't ever really used USB, but realizzed it is messed up, like port is disconnected or broken. USB is wiggles and no connection. 

 

2) Cant get Gateway to Recognize tye Amp while BT stream audio okay. tried all steps from this site cleared phone and cache, removed and reinstalled, no diifference. Multiple versions of Android. 5 to 8.

Thanks,

James

CODE Gateway Android USB Firmware unhappy

asked 01 Jan 2019 at 07:22 PM

James Graham (12)
0

votes

1

answer

209

views

I am experiencing terrible interference when trying to use my Code 50  via Bluetooth / Gateway (Apple) App while recording on my Mac in Logic Pro X.  I am using a microphone to record the Code 50 and using the Bluetooth Movies series world to change patches.  The clicks/pops/noise/interference is loud enough to interfere with the recording process.  Perhaps a DESKTOP (Apple) Gateway App via Code USB might be a solution for all users experiencing similar issues?   I am running the most current Firmware.  Any current solution to my noise issues? 

Thank you. 

CODE Gateway Bluetooth Mac USB Firmware

edited 17 Dec 2018 at 06:02 PM

Saloni kamalsagar

asked 16 Dec 2018 at 11:46 AM

Saloni kamalsagar
0

votes

1

answer

477

views

I purchased a Marshall CODE 100H + 212 Cab recently.

I downloaded the Marshall Gateway app and have created a My Marshall account.

 

The Amp came pre-loadedwith a 100 presets.

The Marshall Gateway app also came pre-loaded with 100 presets,

but the Gateway app presets are different from the ones in the amp.

 

 

I synced the 100 presets in the Gateway app to my "My Marshall" account Library.

 

I have edited and saved some of the Presets on my Amp.

I want to transfer the edited Presets on my Amp to my "My Marshall" account Library, and then put them in my Gateway app, 

How do I Transfer a Preset FROM my CODE Amp to my "My Marshall" account Library?

I see the option to transfer a Preset from My Library to the Amp,

and I understand how to manage / organize the Gateway app presets from the Library,

but I don't see a way to put a Preset on the Amp in the Library.

Do I have to manually re-create it in the Library?

 

The My Gateway online interface is  great for managing / organizing the Gateway app presets from the Library.

It would be useful if there was as similar interface for managing / organizing the presets on the Amp, when connected via USB.

 

 

CODE Gateway Presets USB

asked 27 Oct 2018 at 10:18 PM

A. Todd Henker
0

votes

1

answer

825

views

Is it possible to control and make changes to the existing preloaded patches of the Code App via the USB port connected to a Windows 10 Laptop?

or the Marshall Gateway App works only with Android/iPhone via Bluetooth?

 

thanks

 

 

 

CODE Gateway Bluetooth USB

asked 05 Jul 2018 at 06:58 AM

Mel Gili
0

votes

2

answers

521

views

I connected my Code 50 to my laptop via bluetooth, but the my.marshall presets says "CODE not connected". I tried connecting via USB, but the amp has a goofy connector that standard USB cables do not connect to. Also - I can connect via the Gateway app on my phone, but the presets I add to My Library do not show up (even though it says that they have synced). 

CODE Gateway Bluetooth Presets USB

asked 11 Jun 2018 at 10:11 PM

Tom Appelbaum
0

votes

1

answer

479

views

Hi, my Code 50 USB has stopped working, nothing wrong with the USB port because it still charges the phone - tried two cables, no luck.  So now I'm trying to figure out how to play songs through it via Bluetooth but *&^%%%%### no luck - how the hell do you do it? I've downloaded the Marshall Gateway app to my android but all i get is my phone icon and an arrow to the amp icon. DO I have to do something on the amp?

CODE Gateway Bluetooth Android USB

asked 07 Apr 2018 at 03:31 AM

Leone Britt
0

votes

1

answer

334

views

Hello using Android Tablett the Code25 wired with USB cable gives Info that IT IS not connected.

Also one question to my Gateway and my Marshall, are this two standalone Systems? how can my library from my Marshall be used in my Gateway. In my opinion all this ist a litte bit to confusing.

Thx.in advance

B.R.

 

CODE Gateway Android USB

asked 22 Dec 2017 at 05:08 PM

slaven lesic
0

votes

0

answers

336

views

I cannot use the Gateway app and USB connection together. If my Windows 10 laptop is connect to the amp via USB while the Gateway app is running, it freezes the controls settings in the amp and the app. I still get sound, but I cannot change presets or edit presets on the amp or with the app with the USB connected. I have to disconnect the USB cable to be able to use the app, or the amp controls. If I want to use USB, I cannot use the app. If I want to use the app, I cannot use USB. Any ideas?

I have the latest firmware and latest version of the app. I have tried disconnecting and reconnecting bluetooth connection. I've tried restarting the computer. I've tried disconnectiong Bluetooth, shuting down the amp and the computer, and starting everthing up again. Nothing helps.

CODE Gateway Bluetooth USB

asked 08 Sep 2017 at 08:40 PM

John Pasnik
1

vote

1

answer

530

views

The lag time in the release of this footswitch is rediculous.  Why would you promise something that you can't / don't deliver on?    IF the Bluetooth/iphone Gateway App were usable/seemless, the physical footswitch might not be necessary.  IF the parameters of the amp (including up/down patches) were avaiable via the USB port to a Computer program/app, the physical footswich might not be necssary.  IF there weren't Bluetooth and other software bugs, then the physical footswitch might not be necessary.  Unfortunately, IT IS necessary just to use the Code 25/50 remotely as was promised in it's advertising when purchased. Mine is still under Warranty by Marshall.   It is not performing as advertised.  Please send footswitch, or send me a RMA (Return Merchandise Authorization) for the whole AMP  - you pay return shipping...   

CODE Gateway Bluetooth USB Footswitch

asked 18 May 2017 at 01:58 AM

S Fisher (6)
2

votes

3

answers

2.3k

views

I am experiencing terrible interference when trying to use my Code 50  via Bluetooth / Gateway (Apple) App while recording on my Mac in Logic Pro X.  I am using a microphone to record the Code 50 and using the Bluetooth to change patches.  The clicks/pops/noise/interference is loud enough to interfere with the recording process.  Perhaps a DESKTOP (Apple) Gateway App via Code USB might be a solution for all users experiencing similar issues?   I am running the most current Firmware.  Any current solution to my noise issues?  Thank you. 

CODE Gateway Bluetooth Mac USB Firmware

asked 05 Sep 2016 at 05:35 PM

S Fisher (6)
Showing results 1 to 13 of 13
Loading - please wait...