Hello folks, I have just bought the Marshall Code 100 which I was really excited about having read the description and watched the demo videos. The amp does sound amazing, but yesterday, on the first occasion that I actually tried the amp during a rehearsal, I was shocked to discover that when I step on the provided footswitch to change presets (like activating one with distortion or heavy delay), mid-song, the flow of the sound broke, there was a moment of silence before it switched to the next preset. I've been trying to research this on the Internet, but have only found 2 instances of it being addressed, no one talks about this in review videos or blogs. This baffles me - how is (mostly) everyone ok with this?
This effectively makes it impossible to use the built-in effects of the amp, which is exactly what its main outstanding feature is. Why have 100 presets when you can't switch mid-song? Are guitarists only supposed to use the Code family to select the main sound they want for a certain song, then keep using pedals for changes mid-song?
I'm extremely disappointed since the built-in effects were the main reason I went for this amp - I wanted to use this as both an amp and a multi-effect board to some extent. Is there any fix for this? A firmware update may be, or does the separately-sold Code pedal make a difference?
Seriously considering returning it at this point. Advance thanks for the replies.
I have just bought the Marshall Code 100 which I was really excited about having read the description and watched the demo videos. The amp does sound amazing, but yesterday, on the first occasion that I actually tried the amp during a rehearsal, I was shocked to discover that when I step on the provided footswitch to change presets (like activate one with distortion or heavy delay), mid-song, the flow of the sound broke, there was a moment of silcence before it switched to the next preset. I've been trying to research this on the Internet, but have only found 2 instances of it being addressed, no one talks about this in review videos or blogs. This baffles me - how is (mostly) everyone ok with this?
This effectively makes it impossible to use the built-in effects of the amp, which is exactly what its main outstanding feature is. Why have a 100 presets when you can't switch mid-song? Are guitarists only supposed to use the Code family to select the main sound they want for a certain song, then keep using pedals for changes mid-song?
I'm extremely disappointed, since the built-in effects were the main reason I went for this amp - I wanted to use this as both an amp and a multi-effect board to some extent. Is there any fix for this? A firmware update maybe, or does the separately-sold Code pedal make a difference?
Seriously considering returning it at this point.
I have Marshall CODE50 and PEDL-91010 (2-way switch). I have the latest 1.44 firmware update installed, but my pedal does not work properly. For some reason when I press the switch to go down a preset it goes up a preset or just does nothing. Sometimes it works, but that does not happen very often. I've opened the footswitch and the circuit seems too simple to be faulty and by the way my amp acts when I press the down switch it looks like it is the problem with the firmware.
Hi i have a set of combined issues with my Code 50 with the 4 button footswitch
First of, love the products!
But my issue with it is major! I cannot set any preset on my footswitch, It seems so easy on the tutorials but mine just keeps on switching back to the preset that already was on the button (1,2 or 3). I do as followed. I chose the preset i want on ex.button 1, so i hold the "store/exit" button for 2 seconds and then i push the 1 button on the footswitch. But it only changes back to the preset it WAS. So no changes. When i HOLD the "Store/Exit" button for too long (3a4 sec) then it says "stored" and then no sounds comes out of the amp anymore, i can push the REV and AMP buttons and the LED light up. But no sound! The footswitch also then doesnt butch. I have to restart the AMP to get it to work again.
I tried to update the firmware but it already was up-to-date so i reinstalled the latest firmware again. I also tried to reset the AMP back to the factory reset but the problem still exists.
I have updated the firmware and it has totally messed with my amp. Footswitch is intermittent, bluetooth is awful. Anyone had a similar issue?
owned a code 25 for a while now but only really started using it during lockdown but have to say I'm really impressed. I'm just using it for living room playing and connected to my DAW as a way of laying down ideas but seriously, it's REALLY good.
For context, I've played guitar for 27 years and working in live music has been my primary source of income (pre lockdown....) for around 17 years. I'm usually a live-sound engineer and tour manager and occasionally fill in the gaps with some guitar-teching. I'm uk-based but have international clients, mostly guitar-based, playing mostly academy sized venues but have done major festivals worldwide and one short stint of an arena tour. The point here is not to blow my whistle, simply to say I've spent a lot of time being exposed to all manner of amps and modelling.
I own a line 6 helix and while the CODE isn't as flexible with regards to I/O, I genuinely feel like it's amp-modelling, especially for crunch, fuzzy or blown out tones, blows the Helix out of the water. Not that I'm as likely to use metal tones or had much cause to tweak them but I've noticed those kind of presets can sound a little thin. Also, higher gain sounds in general could benefit from a graphic EQ somewhere in the modelling chain, as it can be prone to squeak at frequencies usually outside of a regular amps range, presumably because of the full-range nature of the cab.
So, my query is, is there any chance that the CODE range is likely to get any substantial firmware updates or maybe 2nd generation hardware that could bring additional functionality/Pro level durability and a decent footswitch... I'm impressed that you've managed to get that much functionality out of a mono-jack but a few extra switches or even just midi connectivity for use with after market footswitched to access would open the amp right up.
Personally, I'd love to see one capable of more complex I/O routing i.e. the ability to record your dry input to DAW over usb and similarly, route from the DAW to the amp input for re-amping.
Midi I/O and an xlr input with phantom and a decent sounding pre would make it a nice little hub for a solo recording setup.
Anyway, great work Marshall/Softube, really hope you develop the line further.
My footswitch stopped responding under the following scenario.
Marshall Code 50
Four button footswitch
Macbook pro connected via USB
Sound output set to Marshall Code
Playing Youtube videos through the amp and playing along
After a while, the footswitch stopped responding. I couldn't change banks or position within a bank.
Unplugging the USB cable seemed to get things going but footswitch stopped responding again shortly after.
Turning the amp off an on again resolved the issue.
Is it possible to put a loop function on footswitch in a firmware update? I know I could buy a looper pedal, but I bought a digital modeller so I didn't have to go down that road.
Hello guys, i own a marshall code 25 since last summer and about one week now as i play the sound dies sudenly. The amp seems to work all the knobs,the footswitch but no sound at all. The sound comes back when i restart it but after 5-10 minutes of playing same thing happens. I have installed the latest firmware. Does anyone else has the same problem? Any advices would be pretty much apriciated. I bought the amp from andertons, i sent them an email like 3 days ago but no answer yet. Is there any warranty?
Hey guys, got a quick question.For some reason when i put my footswitch into "switch" mode to access my tuner it will not return to "Bank" mode.In switch mode I have programmed the footswitch to button 1 to Tuner and left the other 2 buttons to default Modulation and Delay.When I go into switch mode I can turn on the tuner no problem but (only when I access the tuner) i try to return to bank mode,it will not respond.The only way i can get the footswitch to respond out of tuner mode is to physically turn the Amp's power on then off.I do not have this problem if i want to change the Modulation button or the Delay button. Do i need to do an uprgrade to fix this problem or is my switch defective ? Please help ! Thanks again !!
Promises, promises ... "we'll fix it soon"; " bluetooth issues will be addressed in future firmware updates"; " USB recording issues will be looked into"; AND, a 2-way footswitch will be available for Code 25/50 users when Code 100 is released. Am I alone in my disappointment for Marshall's seemingly apathetic (non) responses to purchasers of their "not ready for prime time" digital products?!?!?! I really wanted a Marshall Amp after 45 years as a Fender user. My mistake. I should have known better. Useless, unsupported, glitched, buggy, unreliable, etc., etc., etc. What say you Marshall in an attempt to save any reputation you thought you had?!?!?!?
A number of months ago Marshall responded on this Forum that a simple up/down footswitch would be available Early 2017 for use with the Code 50 Amp, which I own. I noted that a recent firmware update included files for this pedal and also note that a "PEDL-91010" 2 way Footswitch is "included" with the 100 watt versions of the Code Series Amps. What about us Legacy Users?? When/Where can I purchase a 2-way pedal, and what is the price? Thank you!!
Dear All. When recently reviewing the release notes on Code Firmware Release V1.1 it is indicated that it includes "2-way footswitch support". Can you please provide a list of what "2-way" footswitches are available for the Code 50 as well as what parameters each of the usable footswitches are able to control/change. Thank you!