I have a Nov 2017 dsl 40 cr with pedl-90012 Footswitch. The effect loop is intermittently not foot switchable on the clean channel. I use a clean boost for solos through the loop. Works on dirty channel, not on clean channel. Footswitch effects loop led lights up,, but not on amp. Both green channel leds. I have the individual master volumes leds set for clean channel green, dirty channel red. And I have to push the loop button in and out most of the time to activate it.
Hi
have a quick query regarding the footswitch for the jcm 2000 dsl 100
does anyone know if it's latching or momentary type
I would like to use same with a gcx audio switcher to change channels?
thanks
Hi there! What can it be, when sometimes i turn on my amp the channels simply don't response, there is no led light and no sound. But when i plug a footswitch out, led and sound start to be functional. So it rarely occurs, but still occurs. Should i worry about it? Footswitch itself works properly by the way.
I'm attempting to discover a channel exchanging pedal for my DSL 100h. The Marshall site says it utilizes the PEDL-90012 which is out of creation. Can I simply utilize something like the MRPEDL91003 or do I have to get the first footswitch? tellthebell
Im about to purchase a secondhand AFD100 that does not include the footswitch. I want to make one but im unsure of the layout. Will I be able to use a DSL footswitch and add LEDs. Could anyone provide me a photo of the wiring or any diagram as I cannot purchase one new.
Thanks
Hi
My dsl 20hr is a great sounding amp, I have just started using the supplied footswitch, but noticed a problem. The tone changes when footswitch is plugged in, the tone is clearer, slightly louder. When unplugged the tone goes slightly darker. Also when plugged in the tone is better, more crunchy. But when I engage the fx loop, again the tone darkens, as if throwing a blanket over the speakers. I run a delay and reverb in the loop, checked all cables etc all fine. Any assistance greatly appreciated.
Hi. I recently purchased a DSL40 CR and am wanting the 6 button footswitch so I can use all of the amps capabilities. Is the PEDL 91016 available yet in the US? My local Marshall dealer says that these have been back ordered for months. Currently they are telling me there is a 2 to 3 week shipment delay. What is the availability of these?
looking for model of footswitch for JCM2000 DSL
Hi,
I just recently bought a used Marshall DSL 40CR. It didn’t come with a footswitch. I wanted to know if there are compatible 1 button or 2 button foot switches other than the PEDL-90012 to change the channel. I know there are plenty of footswitches for the older DSL amps. Any help would be greatly appreciated.
Thanks!
I've had a PEDL-91016 footswitch on backorder since August. Can someone provide me the schematic to switch the master volumes? That's all I really want from the switch anyhow.
I'm to the point where this feature was the only reason I bought the amp, and I've not been able to get the footswitch to use it. I do love the tone, but I'm kinda done waiting on it now that I hear it'll be April. This is really my first Marshall purchase, I'm not sure I'll purchase a new product again at this point.
I have a Marshall DSL 100-watt head purchased in 2016 (so not the newest version), whose channel switching and onboard reverb I would like to operate with a Fractal Audio FX8's relay function. The manual for the FX8 clearly states that its relay function is only to be used on amps with "short-to-sleeve" switching. My questions are, is the Marshall DSL100 head built with short-to-sleeve channel switching? And also, do the channel switching and reverb on/off functions on the amp behave in a latching manner (i.e. the effect remains on as long as the switch is engaged) or an auto-off manner (i.e. the effect is triggered by a momentary connection)?
Thank you!
Hallo,
I'm going to buy a second hand Marshall DSL40C without footswitch. I realized that it is not too easy to find on the market an original footswitch (PEDL-00009). could you please tell me a list of compatible footswitch which can replace PEDL-00009 in case I don't find it?
thank you
Hi there. I am not a native but I hope you'll be able to get me right.I have been using Dsl 15c for about 2 years and all of a sudden the amp stoped producing any sound. All controls freeze, footswitch is non responsive. Led’s and tubes are still lit. No pedals in line. I turn power switch off then on and hear sound like a relay click in the background and then sound immediately cuts out. My tech told me the problem is 99% in the microcontroller AT2313 because inside all fuses are still intact. He was able to read the code and fix errors that cut the sound out. However, it did not help because some of microcontroller ports were damaged(most likely it was a factory defect). Is it possible to re-record the code to new microcontroller or maybe there are some other options to consider?
Thanx.
I was dicking about with tones, as you do, and when I meant to save my custom tone to my footswitch, and accidentally saved DSL Clean Chorus to #11 on the amp, Some Dely For You Too. This preset just happened to be one of my favorites. Is there anything I can do about it?
I was dicking about with tones, as you do, and when I meant to save my custom tone to my footswitch, and accidentally saved DSL Clean Chorus to #11 on the amp, Some Dely For You Too. This preset just happened to be one of my favorites. Is there anything I can do about it?
Need a Replacement Footswitch for JCM 2000 DSL 100 head from 2003. originally had a 2 button footswitch. What models footswitches will work with it? Thanks
I saw in a demo video that Marshall will soon have a 6 button footswitch for the DSL 100HR. Does anyone have any idea when that will be available?
Purchased used amp, jcm 2000 tsl 100 2003 with 2003 1960a slant cab. Bought footswitch, being shipped. my questions are 1) will dsl 100 cover fit my tsl 100 2) where can i get replacement tubes 3) Can i get paper manuals for amp and cab 4) is there a rt angle speaker cord available
