Questions
Showing results 1 to 20 of 36
0

votes

0

answers

27

views

Hello everyone, I wanted to tell you about my situation and if you can provide me with any advice or help. 

I have about 4 months ago my Marshall CODE 25 because I liked its characteristics and its comfortably to play in home.
but now I tried to connect it with my pc to use it as an interface and I couldn't, becouse it dosen't appaers in my daw.
When I put the usb cable, the guitar did not sound in the amp and I assumed that because the sound would go to my pc,
but when I took it out, my guitar did not sound,
it does not pick up my guitar.
I tried his bluethooth function and my amp plays the sound of my phone.

Maybe conect the cable usb make some mistake in the software, i don't
now
I've tried turning it on and off several times and resetting the amp. Please I would appreciate
a lot if you could give me any helpful information as I tried my best to have it and i worked hard to have
that amp.

asked 06 May 2021 at 05:44 AM

Vicente Farias
0

votes

1

answer

132

views

If I'm able to do it, what should I look for?

asked 24 Dec 2020 at 12:13 AM

Emil Nilsson
0

votes

2

answers

282

views

Hey!

I REALLY NEED Slash lead tone preset.

My guitar is Chibson Les Paul with SD SH-2 SLASH SIGNATURE PICKUPS.

Thanks, keep rockin' !

asked 09 Dec 2020 at 11:49 AM

Berni S\ASH
0

votes

0

answers

211

views

For a few days now, I have not been able to tune my guitar with my CODE 25. I manage to enter the TUNER menu but nothing happens when I crat a string. Have you ever had the problem? Do you have a suggestion to solve this problem?

Depuis quelques jours, je n'arrive plus à accorder ma guitare avec mon CODE 25. j'arrive à entrer dans le menu TUNER mais rien ne se passe quand je cratte une corde. Avez vous déjà eu le probleme? Avez vous une suggestion pour résoudre ce probleme?

asked 22 Nov 2020 at 10:43 AM

nicolas peillod
0

votes

1

answer

204

views

Hi there!

Is it possible to rename my Code 25?

On the Bluetooth settings it currently appears as: CODE V02027 etc......

...and I only wish to change this into something simpler.

Let me know!

Cheers,

Ales

asked 03 Nov 2020 at 03:23 PM

Alessandro Cesana
0

votes

1

answer

195

views

I've recently purchased CODE 25, installed Marshall Gateway, and paired the code 25 with my smartphone (Xiaomi Redmi Note 8 Pro, MIUI 12, Android 10).

All was fine, I've listened to some pre-sets using the application and tried to disconnect the CODE 25 from the phone. I've opened the Bluetooth settings on my phone, tapped to the CODE 25 device, and pressed to the "unpair" option.

BUT the CODE 25 still tries to pair with my phone every time, when the Bluetooth is on.

I've tried to reset the CODE 25 to the Factory settings, tried to update the firmware - no result. 

Not even resetting the Bluetooth settings on my phone helped to solve the problem: the CODE 25 spams my phone with the requests of pairing every time I turn the device on.
When I pressing the Cancel button on the pairing request, the next request comes within several seconds.

It's really annoying!


How to force the CODE 25 to stop spamming my phone?

asked 18 Oct 2020 at 02:53 PM

Vitalii Yermakov
0

votes

1

answer

243

views

Hello!

I've registered today on my.marshall.com and added some presets to "My Library" section. The thing is when I go to "My Gateway" section on this site, so I can add the presets I've just added to the library of presets list that I see on the APP on my phone (Android) so I can play them, I see the following message:

You haven't synced any presets from a Gateway app yet.

Click here to download the Marshall Gateway app now.

I've already downloaded the Gatewayy APP on my phone, and I'm actually logged in my phone too, and by the way I've synced my phone with the "Sync Now" button on "My Marshall" section on the APP many times just in case. On the other hand when I enter "My Gateway" section, the "My Library" list of presets I've just added it's there at the bottom of the page, but I can't move them to the 100 preset list that is already loaded in my phone like I've seen on tutorial videos (the 100 presets aren't there).  Seems my.marshall.com can't recognize the syncing. I've logged in and out of my.marshall.com and on the app, with no effect; it doesn't make a difference if the amp is on or off. Any help would be greatly appreciated, thanks!!

edited 11 Oct 2020 at 01:44 PM

Martin B

asked 10 Oct 2020 at 06:35 PM

Martin B
1

vote

0

answers

195

views

Hi all. I have a Code 25 which sounds great through headphones using the cab emulation. Without headphones I'm struggling to find a cab that doesn't sound really boxy. If I switch the cab off, it becomes a fuzzy mess and is unusable. Am I missing something or is that just how it is?

Thanks in advance!

asked 06 Sep 2020 at 05:42 PM

Paul Bird (1)
0

votes

2

answers

287

views

I bought a new marshall code 25 and plugged in my guitar to test if everything works fine. But when I touch a string the Amp makes a quite but annoying and strange "crack" sound, but only when I touch it. That happens when I even not play the string, it's enough to put your finger slow on the string. Also the Amp rustle when I'm playing but not when I'm not playing, is that normal??

Come somebody tell me please if they have the same problem or if that's normal?! 

 

Thanks 

asked 29 Jul 2020 at 09:56 PM

Fynn 1234
0

votes

0

answers

229

views

Buenas noches, tengo un Code 25, a mi me gusta conectar mi celular para tocar encima de mi musica, pero el audio no se escucha bien, parece como si no tuviera fidelidad se escucha opaco, ya probe con otro celular, con una laptop, lo probe con cables y sigue igual, deseo saber si esto es normal o tal vez mi amplificador esta fallado ya que el mismo audio lo conecto en una bocina cualquiera y suena  mejor, gracias

 

asked 22 May 2020 at 05:35 AM

Sergio Geronimo (1)
0

votes

1

answer

325

views

is there any way to reduce buzz from master volume knob on marshall code 25? the difference between level 1 and 2 is tremendeus,  beside ist get a little crackly while turning knob from 0 to 2 or 3 (7-8-9 o'clock)

asked 17 May 2020 at 01:07 PM

irfan arachman
0

votes

3

answers

417

views

Hi,

I have problems to connect my Code25 to Studio One. I get the message 'Failed to open digital audio interface. Please make sure that the sample rates of your recording and playback devices match'.

As you see in the screenshots, the sample rate is the same both for playback and recording. I don't know why I can't change that in Windows, but it's the same.

Any suggestions?

Thanks.

asked 29 Mar 2020 at 09:17 AM

Maarten Roels (1)
0

votes

2

answers

485

views

Can you use a wah and then have another pedal for another thing? Does this even make sense ? Do guitarist even use 2 pedals ever? I am so new to this so just asking about some thoughts I have

asked 29 Feb 2020 at 04:27 AM

Ike Machover
0

votes

0

answers

296

views

I would like the intro guitar sound. Please let me know if you can tell me how to program it.

asked 29 Feb 2020 at 02:52 AM

Ike Machover
0

votes

0

answers

269

views

I would like the intro guitar sound. Please let me know if you can tell me how to program it.

asked 29 Feb 2020 at 02:52 AM

Ike Machover
1

vote

2

answers

421

views

Can anyone help me with a blues tone for the guitar? i am a litte bit confused about the amps/preamps etc ... (ESP Ltd ec 256 FM)

Also i would like to tell me a lead tone as well...

Thank you in advance

asked 20 Feb 2020 at 01:29 PM

Haris Orfanidis (1)
0

votes

1

answer

456

views

I noticed most of the presets on this website are reduntant/repetative and all I'm seeing is mostly Metallica and Pink Floyd with a bit of Marshall presets as well and some RHCP but mostly it's all classic rock genre and era styles.

I'm brand new to programing if you want to call it that and this is my first amp ever but I was expecting a crap load of variety from the users that have this amp. I'm trying to find some Weezer - Hash Pipe preset for anyone that can help and I know it just sounds like distortion but I literally suck at tring to get any sound and yes I am trying.

asked 17 Feb 2020 at 04:08 PM

Ike Machover
0

votes

0

answers

364

views

What would be the correct way to connect the multi-effects (POD HD 500x) to the amplifier (CODE 50)? I would like to use the multi-effect amplifier emulator in some presets. please

asked 05 Dec 2019 at 09:55 PM

Ivar Illanes
0

votes

2

answers

477

views

Hi There, 

I have been using my Marshall code 25 since last yr and noticed that when the amp is plugged and NOT turned on. There is an electric current at the end of the cable. It only dissapears when I turn on the AMP. The electric current runs until the guitar when its plugged. I have tried the cable on other amps and it was fine. 

Has anyone experiences this? or is this normal? 

Appreciate the response. 

 

asked 07 Jul 2019 at 06:59 AM

jericho zabala
1

vote

1

answer

677

views

Dear Marshall Team,

It took some time, almost a year, but finally we got the long awaited update of the firmware to fix the painful Bluetooth issue on CODEs. I installed it a few days ago (which was a bit of an issue as reported in another of my posts but finally succeeded) and now CODE does what it is supposed to do.  BT comes on and connects as it should every time I turn on the amp and start Gateway on my Ipad/Iphone.

I'm very happy that you could fix the problem and I encourage all brothers and sisters in pain to upgrade the firmware asap if they haven't done already.

In the light of this fix I think we, the community, may also forgive you that for months you told us that it is not a firmware issue ;-) 

So far I also think that the BT connection is more stable than it used to be. 

Now I can enjoy again my little CODE 25. 

Thanks, Alex F.

asked 03 Jul 2019 at 08:28 AM

Alexander Fleischmann (14)
Showing results 1 to 20 of 36
Loading - please wait...