Questions
Showing results 1 to 19 of 19
0

votes

1

answer

160

views

Hello everyone, I wanted to tell you about my situation and if you can provide me with any advice or help. 

I have about 4 months ago my Marshall CODE 25 because I liked its characteristics and its comfortably to play in home.
but now I tried to connect it with my pc to use it as an interface and I couldn't, becouse it dosen't appaers in my daw.
When I put the usb cable, the guitar did not sound in the amp and I assumed that because the sound would go to my pc,
but when I took it out, my guitar did not sound,
it does not pick up my guitar.
I tried his bluethooth function and my amp plays the sound of my phone.

Maybe conect the cable usb make some mistake in the software, i don't
now
I've tried turning it on and off several times and resetting the amp. Please I would appreciate
a lot if you could give me any helpful information as I tried my best to have it and i worked hard to have
that amp.

asked 06 May 2021 at 05:44 AM

Vicente Farias
0

votes

2

answers

380

views

Hey!

I REALLY NEED Slash lead tone preset.

My guitar is Chibson Les Paul with SD SH-2 SLASH SIGNATURE PICKUPS.

Thanks, keep rockin' !

asked 09 Dec 2020 at 11:49 AM

Berni S\ASH
0

votes

0

answers

307

views

For a few days now, I have not been able to tune my guitar with my CODE 25. I manage to enter the TUNER menu but nothing happens when I crat a string. Have you ever had the problem? Do you have a suggestion to solve this problem?

Depuis quelques jours, je n'arrive plus à accorder ma guitare avec mon CODE 25. j'arrive à entrer dans le menu TUNER mais rien ne se passe quand je cratte une corde. Avez vous déjà eu le probleme? Avez vous une suggestion pour résoudre ce probleme?

asked 22 Nov 2020 at 10:43 AM

nicolas peillod
0

votes

1

answer

284

views

I've recently purchased CODE 25, installed Marshall Gateway, and paired the code 25 with my smartphone (Xiaomi Redmi Note 8 Pro, MIUI 12, Android 10).

All was fine, I've listened to some pre-sets using the application and tried to disconnect the CODE 25 from the phone. I've opened the Bluetooth settings on my phone, tapped to the CODE 25 device, and pressed to the "unpair" option.

BUT the CODE 25 still tries to pair with my phone every time, when the Bluetooth is on.

I've tried to reset the CODE 25 to the Factory settings, tried to update the firmware - no result. 

Not even resetting the Bluetooth settings on my phone helped to solve the problem: the CODE 25 spams my phone with the requests of pairing every time I turn the device on.
When I pressing the Cancel button on the pairing request, the next request comes within several seconds.

It's really annoying!


How to force the CODE 25 to stop spamming my phone?

asked 18 Oct 2020 at 02:53 PM

Vitalii Yermakov
0

votes

1

answer

345

views

Hello!

I've registered today on my.marshall.com and added some presets to "My Library" section. The thing is when I go to "My Gateway" section on this site, so I can add the presets I've just added to the library of presets list that I see on the APP on my phone (Android) so I can play them, I see the following message:

You haven't synced any presets from a Gateway app yet.

Click here to download the Marshall Gateway app now.

I've already downloaded the Gatewayy APP on my phone, and I'm actually logged in my phone too, and by the way I've synced my phone with the "Sync Now" button on "My Marshall" section on the APP many times just in case. On the other hand when I enter "My Gateway" section, the "My Library" list of presets I've just added it's there at the bottom of the page, but I can't move them to the 100 preset list that is already loaded in my phone like I've seen on tutorial videos (the 100 presets aren't there).  Seems my.marshall.com can't recognize the syncing. I've logged in and out of my.marshall.com and on the app, with no effect; it doesn't make a difference if the amp is on or off. Any help would be greatly appreciated, thanks!!

edited 11 Oct 2020 at 01:44 PM

Martin B

asked 10 Oct 2020 at 06:35 PM

Martin B
1

vote

0

answers

323

views

Hi all. I have a Code 25 which sounds great through headphones using the cab emulation. Without headphones I'm struggling to find a cab that doesn't sound really boxy. If I switch the cab off, it becomes a fuzzy mess and is unusable. Am I missing something or is that just how it is?

Thanks in advance!

asked 06 Sep 2020 at 05:42 PM

Paul Bird (1)
0

votes

1

answer

437

views

is there any way to reduce buzz from master volume knob on marshall code 25? the difference between level 1 and 2 is tremendeus,  beside ist get a little crackly while turning knob from 0 to 2 or 3 (7-8-9 o'clock)

asked 17 May 2020 at 01:07 PM

irfan arachman
0

votes

2

answers

615

views

Can you use a wah and then have another pedal for another thing? Does this even make sense ? Do guitarist even use 2 pedals ever? I am so new to this so just asking about some thoughts I have

asked 29 Feb 2020 at 04:27 AM

Ike Machover
0

votes

0

answers

376

views

I would like the intro guitar sound. Please let me know if you can tell me how to program it.

asked 29 Feb 2020 at 02:52 AM

Ike Machover
0

votes

0

answers

357

views

I would like the intro guitar sound. Please let me know if you can tell me how to program it.

asked 29 Feb 2020 at 02:52 AM

Ike Machover
0

votes

0

answers

455

views

What would be the correct way to connect the multi-effects (POD HD 500x) to the amplifier (CODE 50)? I would like to use the multi-effect amplifier emulator in some presets. please

asked 05 Dec 2019 at 09:55 PM

Ivar Illanes
0

votes

2

answers

565

views

Hi There, 

I have been using my Marshall code 25 since last yr and noticed that when the amp is plugged and NOT turned on. There is an electric current at the end of the cable. It only dissapears when I turn on the AMP. The electric current runs until the guitar when its plugged. I have tried the cable on other amps and it was fine. 

Has anyone experiences this? or is this normal? 

Appreciate the response. 

 

asked 07 Jul 2019 at 06:59 AM

jericho zabala
1

vote

1

answer

795

views

Dear Marshall Team,

It took some time, almost a year, but finally we got the long awaited update of the firmware to fix the painful Bluetooth issue on CODEs. I installed it a few days ago (which was a bit of an issue as reported in another of my posts but finally succeeded) and now CODE does what it is supposed to do.  BT comes on and connects as it should every time I turn on the amp and start Gateway on my Ipad/Iphone.

I'm very happy that you could fix the problem and I encourage all brothers and sisters in pain to upgrade the firmware asap if they haven't done already.

In the light of this fix I think we, the community, may also forgive you that for months you told us that it is not a firmware issue ;-) 

So far I also think that the BT connection is more stable than it used to be. 

Now I can enjoy again my little CODE 25. 

Thanks, Alex F.

asked 03 Jul 2019 at 08:28 AM

Alexander Fleischmann (14)
0

votes

1

answer

612

views

Dear Marshall team,

I got my new Marshall code 25 but had to recognize that i am not able to connect with the gateway app. I am connected with the amp, but i do not see the connection sign on the left on the app.   It is also not requested to enter a code or number while connecting with the amp. The key is also always different when i am trying to connect again with the bluetooth. I am kind of desperately because I was really excited about my new amp :(

What can I do to connect with the app? I tried everything that was already suggested in the other comments. Please help me :/

Greetings from Germany,

Lilli

asked 07 Dec 2018 at 06:17 PM

Lilli Schaper
0

votes

1

answer

1.5k

views

hello, i'm a code user (25 watts) and i have to say that is a great amp for clean tones and crunch also. But when you try to create a hi gain tone there are some frequencies that ruin your sound, and this make me think that these unit need an eq effect or block to reach a tone with more precision. will marshall still have plans for the code line?  will you release a new update ? i hope that marshall enginners listen my petition

pd: the eq knobs in the amp doesn't help 

greetings!!!

asked 27 Sep 2018 at 06:19 AM

Pelao Medina
1

vote

6

answers

4k

views

Hi everyone!

Recently I bought Marshall CODE 25 and it's a great amp but I have one little problem with it.

There is a problem with MASTER potentiometer. I noticed that when I set it between 0-0.99 it is very very quiet but when I set it about 1.0 it becomes very loud. And in the effect it is very hard to play at "bedroom" volume levels. I must say that I'm disappointed - I had Yamaha THR 10 previously and it could play very well at every volume and it could play very quiet.

So to sum it up, is this some general issue with all CODE amps or something is broken in mine? Maybe master potentiometer needs repair?

asked 28 Feb 2018 at 08:15 PM

RafaƂ Nowak (4)
0

votes

2

answers

860

views

ase poco compre un code 25 y cuando lo empeze a usar resulta que el sonido que saca es demasiado brillante es asi con los 100 pre ajustes

tengo que bajarlr el agudo para tener un poco de sonido desente....

alguna solucion para esto??

asked 22 Jan 2018 at 02:05 AM

ronal snz
0

votes

0

answers

1.2k

views

Can anyone please share "We Will Rock You" by Queen preset for Code 50 amp? 

Thank you

asked 27 Sep 2017 at 02:29 AM

Mario Rojas (15)
1

vote

2

answers

1.4k

views

I have a Code 25 and a windows 10 computer and I have tried everything and I can not get the amp to connect to my computer via USB. Does anyone know why? If anyone knows why please help!!! 

edited 25 Sep 2017 at 05:00 AM

Cohen Dedinas (1)

asked 25 Sep 2017 at 04:52 AM

Cohen Dedinas (1)
Showing results 1 to 19 of 19
Loading - please wait...