Questions
Showing results 1 to 20 of 49
0

votes

2

answers

130

views

I recently purchased a code 100h.  I've noticed that with the cabinet simulation turned off, the amp is incredibly fizzy and bright.  I am running into a 2x12 with Celestion Vintage 30s.  Is there a way to tame this high-end shrillness without having to resort to running cabinet simulation through an existing cabinet?

asked 07 Jul 2021 at 05:55 PM

Blake Hatton
0

votes

0

answers

145

views

Hello everyone, I own the Marshall CODE 100H and CODE 212 cabinet.I really love this amp, but I find the MY GATEWAY web page interface to be somewhat awkward to use. The following are issues that I would like to see changed.

1) On the My GATEWAY web page, the preset list at the top is arranged by columns (as it should be), but the MY LIBRARY list below that is arranged by rows.

?

2) There is no indication in the MY LIBRARY section on the MY GATEWAY tab whether a preset is or isn’t in the MY GATEWAY list.

edited 07 May 2021 at 12:13 PM

Peter Marsi

asked 07 May 2021 at 11:50 AM

Peter Marsi
0

votes

2

answers

235

views

Hello everyone from Portugal,

 
I hope you guys are safe and keeping up. Proud of another Marshall product, adding to the existing Haze 40 and the pre JMP-1, the CODE 100H. I am still going thru the details of every aspect of the digital architecture, but some do seem permanent and require your support:
 
1. Each saved preset will freeze the unit, muting sound, disabling "preset" knob, only mitigated by turning off and on the unit. Actually this will happen exactly the same way if I'm using the app to save the preset.
 
2. If by chance the app is not detecting/recognizing the amp (after previous sync's), the only way to enable this is to shut down the app and turn it back on again.
 
3. When the unit is ON and the volume is 0, there is a clear hum coming from the speakers. This hum is non existing when using the headphones. I am using the original cabinet cable supplied.
 
4. My understanding of the CAB feature, is that it should be "on", if using the DAW or headphones, and OFF when connected to a cabinet (I'm using CODE 212 btw and enjoying it). Why all the presets are factory saved with CAB "on"?
 
The unit was bought with the 1.44 version already installed. I have not tried yet to reinstall anything. I am using Mac, with no Windows sw.
Thanks for the support,
Pedro
(cc to servicedesk@marshall.com)

asked 02 Apr 2021 at 08:19 AM

Pedro Faria
0

votes

1

answer

183

views

Hi! I have a question about CODE 100H. I need to play directly in mixer but it hasn't a DI exit, can I use it without a cabinet? If I can, how can I do it? If I don't use cabinet, will CODE be damaged? Thanks for your help. 

asked 18 Mar 2021 at 10:56 AM

Malcom Pregnolato
0

votes

1

answer

218

views

Is it possible to combine Code 100w with MG412AG extension cabinet and have all 6 speakers work?

asked 22 Feb 2021 at 03:12 AM

Jeffrey Mote
2

votes

2

answers

481

views

every company who sells digital amp made some upgrade with more amp or efx or cabinet or upgrade a better firmware with better tones. you do nothing! I've asked you - almost one year ago -, by mail, if marshall was programming an upgrade and in your mail you answered yes..I think was untrue, it's the worst support I've ever seen in digital amplification.

asked 27 Oct 2020 at 04:28 PM

Raimondo Dalmotto (9)
0

votes

1

answer

350

views

Can I use an extension cabinet such as the MG412 being there is an extension cabinet output on my Code 100C combo amp?

asked 25 Oct 2020 at 03:27 PM

Bill Petrich
0

votes

1

answer

389

views

Just bought a brand new Code 25 amp that was delivered by courier. It sounds great in play but there is a relatively loud constant hum from the speaker from about 5 seconds after switch on. Even with no guitar attached. is this normal?

 Also something is rattling inside when I tilt the cabinet side to side. I'm worried it may have been damaged in transit. Maybe these two issues are related?


Anyone have any thoughts or advice. Not sure I can face sending it back to the seller as although I bought it off a .co.uk website it actually shipped from Poland. 

 

 

asked 03 Sep 2020 at 06:45 AM

Jonathan Howarth
0

votes

2

answers

315

views

On the Gateway app I can playback very little music. I can easily play music with iTunes (Bluetooth) but I am referring to using the playback feature. I have tried to playback 50-60 songs, some of it is purchased but all of it is downloaded. Why do only certain songs work. This is a huge issue for me and one of the main reasons I bought the Code 100H and 212 cabinet. 

asked 03 Sep 2020 at 01:45 AM

Jay Thompson
0

votes

1

answer

591

views

Hi, Do someone know if the "custom voiced" speakers on a CODE 4x12 8ohm cabinet are the same as in the mg412a cabinet ? The mg cab is loaded with celestion g12-412mg 8ohm speakers that look like celestion rocket 50 but seem to be rated at 30 watts ... because the cab is rated 120w... some AVT cabs are loaded with celestion g12-412avt and some with celestion rocket 50 but AVT cabs are 16ohm (maybe the cause of suffixes change on the g12..) I've browsed  the celestion website to find some answer and the only one that had the same magnet is the rocket 50 and is rated to 50 watts... i would like to know what kind of speakers are on the CODE cab and if the mg412a cabinet sounds about the same as the CODE 412 cab with a CODE 100h head ...i don't like the format of the CODE cab...but want to keep all the tone modeling capabilities of the CODE 100w head

asked 18 Apr 2020 at 02:13 AM

Steve Paquet
0

votes

2

answers

383

views

I recently hooke this head unit up to a 2 2x12 cabinet 8ohm and per instructions and at full cranked volume barely hear anything

Any suggestions or tips before persuing it being faulty? speaker cable hook up and checked with another cabinet and still same thing barely any volume . 

asked 01 Apr 2020 at 05:35 PM

Greg Snyder
0

votes

2

answers

574

views

 I have just received my first ever Head Amp. So very excited about it. My question, is it totally unadvisable, to test out the headphone socket without connecting up a cabinet to the head amp? 

I was hoping to test before  obtaining a cabinet  (212 I had in mind).

However it does not advise using it without a cabinet connected. Is there a risk in blowing up the circuitry otherwise? 

Thanks for taking the time reading this. 

edited 20 Mar 2020 at 05:10 PM

Rick Vince (1)

asked 20 Mar 2020 at 05:08 PM

Rick Vince (1)
0

votes

2

answers

848

views

Hi, can anyone explains to me WHY we can't use a CODE 100H without the cabinet? For VALVE amps there is a good reason for which you need the cabinet always connected but for solid state amps it seems very strange.

Is it maybe an error in the manual? Maybe it's a phrase that has been written for all the Marshall valve heads and it was mistakenly added to the CODE as well?

Please let me know, I have an application where I only need the 100H coming up soon.

Thanks!

asked 23 Dec 2019 at 11:53 PM

Lele X (14)
1

vote

1

answer

653

views

Hi,

 

I recently buy a Code 100 head and 4x12 cabinet and I loving it!

But I do have one concern the hum,there is a humming noise coming from the speakers when not played or not plugged in?

When I put the power one the humming is there and when played humming isn´t noticeable.

 

asked 25 Oct 2019 at 04:24 AM

Teppo Salotuomi (1)
0

votes

0

answers

788

views

List of factory presets for CODE 100H head. From 2019, the presets are different than combo models. Rig info: the CODE 100H head and 4X12 cabinet.

edited 16 Oct 2019 at 05:20 PM

William Jones

asked 16 Oct 2019 at 05:08 PM

William Jones
1

vote

1

answer

829

views

My question is concerning the Code 100H. When using an external cabinet, is it better to use the preset power/cab selections or to turn them off. Does this apply to the Marshall code cabinet and any other cabinet, or just to a different cabinet ie: 2x12 Morgan ? Thanks.

asked 03 Sep 2019 at 01:56 PM

oliver hoy (1)
0

votes

0

answers

501

views

I was wondering if the creator of the KASHMIR preset would be interested in also creating the FLANGER part for KASHMIR using all the current preset settings (amp, cabinet, speaker etc) as a complimentary preset for the turnaround section of the song.  I believe, from forums, that a preset will switch better (Marshall CODE footswitch) if the preset has the same amp, speaker and or cabinet setting as it takes away the millisecond delay of switching between amps in a particular preset.  Look forward to your answer and or creation of said beasty.

Regards Kev

 

asked 30 Jul 2019 at 02:07 AM

Kev Lawlor
0

votes

1

answer

549

views

Hey guys

I bought a Marshall Code 100H about a month ago. (The cabinet also)

Now what i ask myselfe is. I have a strange cracking sound when I play with the Bridge Pickup. This only happens when I play a distortioned sound. All the clean sounds are perfect. Bus as soon I activate a distortion pedal, or put the gain up, there is this strange cracking. It's like an oversteering of distortion.

I tried with different cables, resetting the amp, with headphones, other guitars and another loudspeaker, but it's always the same.

Since I live in switzerland and I had to buy the amp in germany, it's kind of difficult to go to the dealer, because he's four hours driving away from my home.

Or do I have too high expectations on this amp, and this is totaly normal?

I recorded a sample of it, but I don't know where to upload.

 

Many thanks for your help.

 

Rock On!!!

asked 29 Jul 2019 at 11:37 PM

Kai Stiner
0

votes

1

answer

521

views

I have a code 100H. When using the headphones, the effects loop does not come through. If I connect an external cabinet it works fine. Why doesn't the FX come through in headphone mode? Thank you.

asked 21 Jul 2019 at 07:05 PM

oliver hoy (1)
0

votes

1

answer

696

views

I have a Marshall Code 50. Not sure what’s happened but when I plug my guitar into it, I get no sound and the presets are now being controlled by the guitar volume knob. If guitar volume is full high, display on the Code quickly scrolls thru presets. If guitar volume is full low, you can individually scroll thru presets by quickly turning volume knob up then quickly back down. No volume from cabinet regardless of preset volume or master volume, only static. Have tried with both electrics I have and both cables, in various configurations with no difference.

Any help is greatly appreciated.

Thanks. Kevin.

asked 18 Jul 2019 at 12:29 AM

Kevin Mac Queen
Showing results 1 to 20 of 49
Loading - please wait...