Has anyone used a small pedal amp to input the headphone to a amp like the electro harmonix 5MM. I saw this done on a Spark amp to connect to a speaker cabinet. I would think I could do the same on the CODE. Adapt the 1/8 to 1/4 to go from headphone jack to the input on the 5MM and then in my case that speaker cable goes to a mixer. I know this amp does have a dedicated line out to do what I want to do. So I think this would accomplish the same thing. Any thoughts good or bad? I plan to try as soon as I get my hands on a small pedal(not a stomp box, just a pedal size amp) and configure the cables to go from 1/8 headphone to the 1/4 input on the amp. I'm not an electrical engineer, I just need a "line out" if possible. Should work. Thanks,
Just bought a brand new Code 25 amp that was delivered by courier. It sounds great in play but there is a relatively loud constant hum from the speaker from about 5 seconds after switch on. Even with no guitar attached. is this normal?
Also something is rattling inside when I tilt the cabinet side to side. I'm worried it may have been damaged in transit. Maybe these two issues are related?
Anyone have any thoughts or advice. Not sure I can face sending it back to the seller as although I bought it off a .co.uk website it actually shipped from Poland.
Hi, Do someone know if the "custom voiced" speakers on a CODE 4x12 8ohm cabinet are the same as in the mg412a cabinet ? The mg cab is loaded with celestion g12-412mg 8ohm speakers that look like celestion rocket 50 but seem to be rated at 30 watts ... because the cab is rated 120w... some AVT cabs are loaded with celestion g12-412avt and some with celestion rocket 50 but AVT cabs are 16ohm (maybe the cause of suffixes change on the g12..) I've browsed the celestion website to find some answer and the only one that had the same magnet is the rocket 50 and is rated to 50 watts... i would like to know what kind of speakers are on the CODE cab and if the mg412a cabinet sounds about the same as the CODE 412 cab with a CODE 100h head ...i don't like the format of the CODE cab...but want to keep all the tone modeling capabilities of the CODE 100w head
I recently hooke this head unit up to a 2 2x12 cabinet 8ohm and per instructions and at full cranked volume barely hear anything
Any suggestions or tips before persuing it being faulty? speaker cable hook up and checked with another cabinet and still same thing barely any volume .
I was wondering if the creator of the KASHMIR preset would be interested in also creating the FLANGER part for KASHMIR using all the current preset settings (amp, cabinet, speaker etc) as a complimentary preset for the turnaround section of the song. I believe, from forums, that a preset will switch better (Marshall CODE footswitch) if the preset has the same amp, speaker and or cabinet setting as it takes away the millisecond delay of switching between amps in a particular preset. Look forward to your answer and or creation of said beasty.
I recide to open my code 50 cabinet. It was not just a simple sound change matter. For me this cabinet is the low point in the project. With this upgrade I believe now th speaker moves freely. Of coarse you have all those open cabinets advantage, more crystallinity, less punch low freequencies, more spacial sound distribution (less directionality)... For me the stage effect was quite positive. Some time ago I was really deciding to kick it out but now I am very satisfied with this little amp.
Is the CODE™412 4x12-inch Angled Electric Guitar Speaker Extension Cabinet discontinued? If so, then why? I did purchased one 2 years ago.
My online dealer no longer has it listed; instead, they have listed, the CODE™212 2x12-inch Angled Electric Guitar Speaker Extension Cabinet ― which I do plan on buying ― however, I still would like to purchase another CODE™412.
Can the speakers be upgraded on the Code 412 cabinet? If so, is it something a person can do who’s never changed a speaker before, or would it need professional installation?
I use de Plexi/Classic 100W for an Angus Young tone. When I crank up the volume above 1/3 I got a lot of feedback noise. It is like the sound of a mic that picks up its own sound from a speaker. Whatever I try do to, it won't go away.
I bought this amp with the CODE 412 Cabinet for stage performances, but it is unusable this way. Can you please help me to solve thsis problem?
Hello, Marshall forum family. I just purchased the CODE 100H (head only). I have a Marshall cabinet with 4x12 MG series, and I hate the sound of this combination! Does anyone have advice for a replacement speaker?
Thank You All
I researched 1x12 open back vs. closed back vs. ported cabinet guitar cabs. My experiment with my Code 50 amp was to remove the back without unplugging anything so I could here the difference between closed back and completely open back. The amp really came alive with a lot of punch and presence while ridding the boominess that occurs. I removed the power cord socket and cut a square the same size as the speaker. This was an improvement but I liked the complete open back sound better. I then cut the back out more leaving just enough stock to support the existing power cord socket hole and protect the electronics inside the cabinet. I will continue with cosmetics such as painting inside black and/or add a grate for protection. To my ears the amp really came to life open back. I will keep it this way. It is an easy experiment to try without sacrificing anything, just remove the back cover screws and pull the back away. If you hate it you just refasten it and leave it original.
CAN I ADD ANOTHER SPEAKER CABINET TO THE CODE 50
I WOULD LIKE BOTH CABINETS TO PRODUCE SOUND
MAYBE THROUGH THE USB OR A PORT OUT OR A WIFI CONNECTION
I have a code 100 combo and there is an output on the back just like the code 100h. Is it possible to plug the code 100 combo into a speaker cabinet and just use it like the code 100h?
Hello guitar players,
today I got my new Code 100 head and connected it with my 2x12 speaker 1936 from marshall. I tried the presets and they sound very cool but the sound is in my opinion a little bit to muffled and not clear enough.
So I kicked out the cabinet in the settings and then the sound is very clear and cool for me. But whats exactly the sense of the cab when it sounds not good in my opinion. Do I really need them?
Thanks for your answers! :)
1) CODE 50 occasionally locks up when changing speaker cabinets (no sound). Must reboot.
2) sound gets progressively "muddy" when tweaking controls. Must reboot to get the sound back.
3) Cannot update: CODE connects to PC, but app generates error saying it cannot get information from the CODE.