The iOS Gateway app was unable to connect to my CODE 50 even though my MacBook Pro is connected via bluetooth, so I did a factory reset and then tried to do a firmware update. The first part of the firmware update (1.44) appeared to install correctly. Next I saw a DSP update and tried to apply that update. In the middle of the DSP update, I received an error message to the effect that the update failed and I should power off & on my computer/device. I powered my Mac off & on, but the CODE 50 shows a progress indicator (about 20%) and says "DO NOT SWITCH OFF."
I tried to reinstall the firmware/DSP update, but this time the update process would not even begin. I suspect the problem is the frozen progress indicator and whatever ongoing or frozen process is causing the "DO NOT SWITCH OFF" message.
Othe than ignoring the warning on the CODE 50 and powering it off & on, I don't see what else I can do. Is there a way to abort the ongoing or frozen process without turning the CODE off.
What should I do?
I’m looking into getting a new IPad and I was curious if I can use GarageBand as my software and record direct from the USB port on my Marshall code 25 to record? Or should I spend the money for a new Mac book or Mac laptop will either of those work?
First pairing is OK but after a restart NEVER the Blue Light goes on and, its clear, no auto reconnect.What is the Problem?Please Fix It!
I use iphone 6s , ipad Air, Samsung J5 and a old Samsung Node.NO Device works. (Android and iOS)
From my Point of View the Code 25 is the Problem not the Devices, because Bluetooth goes not ON if you turn the Code ON.
Please ask me its a Bug and you can FIX it with a new Bluetoot Version or is a Hardware Problem and you cant fix it.
Many Customers waiting for a Fix over 1 Year!!!!
I have the Code 25 just one Day and update the newest FW via Crome with my Mac.
If you cant fix the Problem i send the Amp back to the Dealer in Germany and get my Money Back.
I have a lot Amps from Marshall (like Slash Sounds) but this is a shame.
I bought the combo yesterday and it's full of bluetooth bugs - looking now at the FORUM my impression is that the support doesn't care about it.
- No automatic bluetooth connection - iPHONE - I am having always to force Iphone to "forget" the AMP and pairing it again... each time...
- MAC IOS , When I try to connect the bluetooth in my MAC, it makes the system crashes, mouse and keyboard stop working... there's no were to get the necessary code to bluetooth connection...
DO WE HAVE PLANS FOR A NEW FIRMWARE TO BE RELEASED SOON ? PLEASE
Ive had this amp five days now and I’m totally frustrated!
Here are my issues:
• Bluetooth Connectivity
The amp loses connectivity with the MyMarshall app constantly! I’ve followed the instructions. I’m sitting less then a foot from the amp, yet it loses connectivity from both my iPhone and two different iPads. It literally takes me 15-20 minutes to get the thing connected, reconnected, and then, BOOM! Again, the sound changes settings on the amp mysteriously, this after taking 15-20 minutes to get the sound and effects exactly the way I want it. I can’t save the setting, because it disconnects the app from the amp, even though it says on the amp and my iPad settings, that I’m still connected. Utterly frustrating! It also limits what time I have to practice because I’m spending most of that time trying to get it reconnected and sounding right again.
Also, after following the directions explicitly, I still have to reconnect the Bluetooth from scratch every time. The app sucks.
• Apple OSX /iOS compatibility
Guys, Your the best amp manufacturer in the music world. The music world is OSX/iOS based. Get your brilliant minds together and allow for the amp to be Updated via Apple products!
• The amp and application
This is a great sounding amp, I’m enamored with the sound as I am with most Marshall Amplification products and the price well within reason, but not just the app is HORRIBLE, but also the effects are also less then desirable. I just can’t seem to get chorus, phase, flanger or echo sounds to my tastes and desires. Same with the auto wah. I just can’t believe you can’t duplicate the same great sounding effects as you have in many of your solid state amps.
I’m hoping you can help, if not, this amp is going back in the box and being returned.
I recieved my Code 100H this week.
(FYI) I attempted the update with a MacBook Pro with USB-C, High Sierra 10.13.1, Chrome Browser. I was able to connect to the Code but the unit would not update. It was stalled on the progress bar on the unit at 0% and on the browser.
(FYI) I attempted the update on a Windows machine and was successful using the update utility and with Chrome Browser. The Code unit shows updating to 1.4.1 but the boot screen shows 1.11?
The Code 100H will not connect to any Bluetooth device I have. Windows, Mac, iPhone, or iPad. It does not even show up as a device and never has even out of the box. I am convienced it does not work. Is there a master reset button combo for the unit? I am out of ideas concerning the Bluetooth. It seems like I am not the only one having issues with the Bluetooth. If this can't work consistently I am considering returning the unit. Even the simplest device can connect with Bluetooth and hold a connection. My Code 100H won't even show up as a device to connect to. Please advise.
I know that the Mac version of the firmware updater is coming soon. But how will we know when new firmware updates are released? Only through the desktop software? Or will there be a notice in the iOS app? The website?