I've noticed that when switching channels, specifically from any other channel to the Clean channel in Green mode, I get an audible pop. Not like a firecracker going off, but definitely bothersome. If I set the Clean channel to Orange mode the pop does not happen. So, the pop only happens when switching to Clean/Green. This pop occurs when switching via the front panel buttons or my midi Voodoo Lab ground Control.
I've had another JVM410H owner try to reproduce the issue, and they experienced the same pop when switching via the front panel buttons, but did not experience the pop when using the Marshall footswitch.
How can I correct this?
I am going stir crazy trying to get my 6101 midi channel switching to work witha new Boss ES5.
The channel switching via the front panel and the footswitch works fine.
I am foillowing the instructions in the amp manual for midi channel switching without success. In the midi patch the amp is designated as channel 1 and I insert the channel number (ie 1, 2 or 3) as the PC. After I send the patch message from the ES5 then I press the relevant channel no. and the store button on the amp and the three lights light up as they are supposed to.
However it is not working despite my amp tech telling me that the amp is receiving the midi messages.
Should the 6101LE midi channel switching be able to be midi controlled with a Boss ES5 ? Are they compatible despite their age difference ?
Is the amp perhaps receiving but not storing ?
Any help from someone who uses midi switching on a 6100 or 6101 with an es5 or es8 would be greatly appreciated ....! Thanks.