Questions
Showing results 1 to 20 of 109
0

votes

1

answer

27

views

I have a code 50 and am trying to update firmware. I have an iPhone X with the Chrome app installed (newest version). I am logged into my Marshall and the gateway app. The gateway app shows I am connected via Bluetooth, but on the my Marshall firmware download page it says I am not connected and my browser doesn’t support download. 

It’s very frustrating, Marshall or any support appreciated.

CODE Gateway Bluetooth iOS Firmware

asked 19 Sep 2019 at 04:03 AM

Mar Fede-mac
0

votes

1

answer

81

views

Hi guys,

Thought I'd share what finally worked for me to get my CODE amp to connect to the gateway app.

I had tried literally everything, unpaired the amp, reinstalled gateway about 10,000 times, used 3 different devices. All with no success.

Until I tried this:

This worked for a Samsung Galaxy S2 tablet, but I suspect it would probably work with any device.

 

1. Uninstall gateway from your device

2. Unpair every single device you have paired with your device through your bluetooth settings.

3. Clear your bluetooth cache and data. On an Android device this is located in App Manager/System apps (to show system apps you might have to click the 3-dot symbol on top right of settings screen)/Bluetooth/Clear cache and data

4. Restart your device

5. Re-Install Gateway app

6. Pair AMP with device via bluetooth

7. Open Gateway app, and hopefully, you'll see your CODE amp has finally connected.

 

The key here is to unpair all bluetooth devices and clear bluetooth cache through your phone's settings.

 

Credit to Cris Lebrun who shared this solution elsewhere in the forum. It was kinda hidden so I thought i'd make a separate thread for it.

 

Good luck

 

CODE Gateway Bluetooth Android App pair connect

asked 06 Sep 2019 at 01:27 PM

ANTONIS MARKIDES
0

votes

2

answers

76

views

Just bought my Code 50 tried to connect the Gateway App to either my iPhone 7 or iPad Air 2.

Did a firmware update to 1.44 , the amp is paired in Bluetooth but when in Gateway, it just says it is connecting but never does.

I have tried reinstalling the firmware, forgetting the edvice and re-pairing, removing all other BT devices etc. etc. but still it will not connect.

UPDATE: this was an iOS issue, not the amp. The latest update to iOS beta 13.1 resolved it. 

 

CODE Gateway Bluetooth iOS Firmware

edited 07 Sep 2019 at 06:17 AM

Steven Clarke

asked 31 Aug 2019 at 04:56 PM

Steven Clarke
0

votes

1

answer

64

views

The iOS Gateway app was unable to connect to my CODE 50 even though my MacBook Pro is connected via bluetooth, so I did a factory reset and then tried to do a firmware update. The first part of the firmware update (1.44) appeared to install correctly. Next I saw a DSP update and tried to apply that update. In the middle of the DSP update, I received an error message to the effect that the update failed and I should power off & on my computer/device. I powered my Mac off & on, but the CODE 50 shows a progress indicator (about 20%) and says "DO NOT SWITCH OFF."

I tried to reinstall the firmware/DSP update, but this time the update process would not even begin. I suspect the  problem is the frozen progress indicator and whatever ongoing or frozen process is causing the "DO NOT SWITCH OFF" message.

Othe than ignoring the warning on the CODE 50 and powering it off & on, I don't see what else I can do. Is there a way to abort the ongoing or frozen process without turning the CODE off.

What should I do?

CODE Gateway Bluetooth iOS Mac Firmware

edited 28 Aug 2019 at 03:47 AM

Jim Marshall (12)

asked 28 Aug 2019 at 02:06 AM

Jim Marshall (12)
0

votes

3

answers

65

views

Hi! I have an issue while trying to transfer dowloaded presets to my Code25. It occures both usb and bluetooth connections.  On a usb connection i click the “amp” icon on a preset, it’s name appears on a Code screen. I push and hold store button on amp, “saved” appears. But then Code becomes freeezed, it does not react on button push etc. when i switch it off and then switch on it works fine, preset available on amp. The same issue appears when i try to transfer presets using Gateway app. What I do wrong?

CODE Gateway Bluetooth Presets USB

edited 20 Aug 2019 at 05:44 AM

Alexey Kornilov

asked 20 Aug 2019 at 05:43 AM

Alexey Kornilov
0

votes

3

answers

169

views

I just bought a CODE 100 combo. Bluetooth audio is pairing just fine but the app never finds or connects to my CODE!

I tried everything, i even uninstalled the app rebooted the phone and started from scratch following your guide but still no luck.
Galaxy s9+ up to date CODE firmware 1.44 and gateway app 1.5.5

Fix this please

CODE Gateway Bluetooth Firmware

edited 12 Jul 2019 at 08:03 AM

Cris Lebrun

asked 11 Jul 2019 at 10:18 PM

Cris Lebrun
0

votes

0

answers

79

views

 

 

Running V1.43 firmware.

I have followed all instructions and can not get the iPad 6 to connect in Gateway app.

It, however "pairs" just fine Bluetooth wise on the iPad 6! 

AND Gateway works well on my iPhone 5, switches presets and everything.

So I know I am doing this right and the Marshall code 100 Head is responding via Bluetooth (with my iPhone 5) but NOT with the iPad 6.

 

Edited: Its the damnedest thing. I removed and reinstalled the app on my iPad 6 at least 8 times with the same results.  

 

Then I reinstalled and paired the "9th" time, and it worked!!!!

I can turn the 100 Code head amp off, and back on and it still connects.

 

I'm glad it works now, but I dunno what I did differently.

 

 

 

 

 

 

CODE Gateway Bluetooth iOS Presets

edited 02 Jul 2019 at 06:24 PM

Michael Howell

asked 02 Jul 2019 at 04:17 PM

Michael Howell
0

votes

1

answer

111

views

I just got this head recently and installed the latest firmware update the other night (6/20/2019).   When I try to connect my IPad through the My Marshall app it seems to be a hit or miss proposition but more miss than hit.   In my settings on the IPad it shows me as connected, and the blue light on the head goes from flashing to solid.  On the app, it shows the head detected but when I press on that I get a "Connection Rejected"  (You may only control amps you are already connected to for audio output) and there's no control over the head from the app.   Now several other times it syncs right up.  I'm at a loss though.  Am I doing something wrong maybe in the sequence (operator error) or is there an issue somewhere else.  The manual doesn't really reference Bluetooth that well.  I'm not bluetooth savy becuase I rarely use it except for my phone in the car and connection there is automatic after I initially set it up.

So is it me?  Is it the gateway software?  Is it the head??   Help please?

CODE Gateway Bluetooth iOS Manual Firmware

asked 22 Jun 2019 at 05:32 PM

Kim Lubstorf
1

vote

0

answers

100

views

It took more than a year, but still!

Finally the annoying Bluetooth problem is fixed!

The amp turns on Bluetooth after power on,  reconnects to the smartphone automatically without manual pairing and the application works fine (there's some problem with application scaling on LG G7 due to screen resolution, but I can live with that).

Thank you for this update, Marshall!

Even if the process was soooo slow that the 1-year warranty ended, it's good to know that you didn't abandon this product :)

Honestly I thought that we won't get any updates and I was surprised to see the Gateway application update and checked the forum just in case. 

Best Regards,

Ilya

CODE Gateway Bluetooth Firmware

asked 21 Jun 2019 at 06:55 PM

ilya macle0d (5)
0

votes

2

answers

179

views

Hello everyone,,

Well,  I've read through all the questions and answers I can.  My Android used to pair fine with my CODE 50.  Now, it will not connect.  I've reinstalled firmware, reinstalled the Gateway app, deleted  nd re-paired the amp.  Very frustrating.  It  seems there are lots of issues with this.  I can hear the amp pair with the phone via bluetooth, but it will not connect with the Gateway.  "Connecting..." appears and doesn't go away.  I'm bummed.  This was a fun amp, but if the bluetooth doesn't work...  anyone got a fix?  Thanks..xvideos xnxx xxx

CODE Gateway Bluetooth Android Firmware

edited 29 Jun 2019 at 06:38 PM

Lincon gomes

asked 11 Jun 2019 at 07:20 AM

Lincon gomes
0

votes

1

answer

81

views

My marshall code 25 connects to the  bluetooth of my phone (Huawei Y6II Android 7) but the gateway application does not detect it and does not connect it.

Thanks 

Gianni Nadalutti 

CODE Gateway Bluetooth Android

asked 23 May 2019 at 10:52 AM

Gianni Nadalutti
0

votes

0

answers

139

views

Hi!

Please help me, Marshall.

I can't connect Marshall Gateway version 1.4.9 running on my cell phone Moto Z Play with Android version 8.0.0 to my Marshall Code 25. The button "Scan for Amps" does not work. Even if I click "Auto-connect" option it does not work too.

I've tried all the solutions on https://my.marshall.com/support/faq/838/code---gateway-bluetooth-connection-troubleshooting without success.

The Bluetooth on my cell phone is on and Code is paired with Marshall Gateway.

Look at the screenshots.

Kindest regards,

Fábio

 

 

CODE Gateway Bluetooth Android

asked 30 Mar 2019 at 03:56 PM

Fabio Peruchi (1)
0

votes

2

answers

216

views

I'm brand new to the forum and I'm here because I have a problem. I bought my CODE 50 about a month ago -- love the amp by the way -- and it's been connected to my Android smart phone ever since I first set it up. I have the auto connect feature enabled so whenever I've been out of range, then moved back into range, it reconnects automatically.

Well, it's worked normally until this morning, when I noticed that nothing was happening when I was changing some settings using my phone. Come to discover the pairing had been lost. At first I started to retry pairing from the phone's menu, where it showed the CODE 50, but it didn't show it as being connected. When I put the amp in pairing mode, it had no effect in the app. 

So I exited the app and booted the pairing function in the phone. The phone paired with the amp quickly, showing the amp's code. But when I went back into the app, now it doesn't even show the amp anymore and when I hit the scan button down in the bottom left of the screen, the app just sits there and doesn't do anything. I've tried restarting the app, but that doesn't do any good. It just comes right back to the same screen as before. 

So, what now? I'm thinking about uninstalling and reinstalling the app, cuz I can't think of anything else that might work.

CODE Gateway Bluetooth Android

asked 19 Mar 2019 at 03:56 PM

Michael McBroom
0

votes

0

answers

99

views

Hi everybody,

I have bought a code 50 but gateway is not working because bluetooth catch only my phone with things like youtube. Is there a solution?

Thanks for the answer.

 

CODE Gateway Bluetooth

asked 04 Mar 2019 at 06:16 PM

Denis Leroux
0

votes

2

answers

216

views

I've owned the new Code 50 for only a few days so I'm still a novice navigating through all the features. I'm just getting into using the My Gateway app from my Iphone and noticed when I'm connected to the amp through Bluetooth and I have the "blue" presets showing on the app which are completely different than the presets I see on the amp when I'm not connected through the Gateway app. So for example when connected through bluetooth I see preset 00 as EL34 Heaven on both my phone and on my amp,  and when I'm not connected through bluetooth preset 00 is JTM Chill. I like the settings on the gateway app much better than what I have for presets when just using the amp without bluetooth. I guess what I'm trying to do is find the easiest way to say replace 00 JTM Chill with 00 EL34 Heaven so I can have 00 EL34 Heaven on the amp without having to connect using the gateway app? I've look at other questions and cant seem to find this answer. Is this the sync function?? Thanks in advance. 

 

CODE Gateway Bluetooth iOS Presets

asked 24 Feb 2019 at 04:49 AM

Ron DeMartino
0

votes

5

answers

151

views

As other users I can´t connect with the app (motorola g4 plus) the bluetooth pairing works fine but the app don´t. Some help? Thanks. Regards

Gateway Bluetooth

asked 23 Feb 2019 at 11:00 AM

Mariano Resi
0

votes

0

answers

105

views

Hi, I'd installed the Marshall Gateway app at my iPod Touch 4G 32GB with iOS 6.1.6. and the app everytime closed a few seconds after starting. Whats the matter? ... No problems with bluetooth connection to my Marshall Code 25 for music listening. Please help me! - Thanks.

CODE Gateway Bluetooth iOS

asked 13 Jan 2019 at 03:05 PM

Udo Hertweck
0

votes

1

answer

161

views

When I try to save a preset to the amp, there is no problem. When I try to save a preset to my library I get the message: Patch cannot be saved; sync with Marshall server in progress.  My gateway has both a Bluetooth and an internet connection. Logged into my.marshall but nothing happening. Sync button is disabled. I feel like I'm missing something in my understanding of this aspect of the Code/Gateway system. Is there a user manual for the Gateway app?

Gateway Bluetooth Presets Manual

asked 12 Jan 2019 at 02:16 AM

David Miller
0

votes

6

answers

282

views

Hello, 

I recently acquired a Code25 amp along with its footswitch (excellent for practising, great for gigs). 

One interesting feature is the Gateway app, however it doesn't seem to function with Android 9... making it useless

My device (latest version of Android 9) successfully finds the amp and pair with it, but the app doesn't display any connected Amp... even if the phone is literally ON the Amp. Nothing seems to correct this: tried resinstalling, repairing, etc. 

Is there anything to do here? Any fix? 

Thanks,

Gateway Bluetooth Android Connectivity Code25 androidphone

asked 10 Jan 2019 at 10:42 AM

omar atik
0

votes

1

answer

163

views

I can pair my code to my phone and connect but the Gateway app won't communicate to the code. What do I try next.

CODE Gateway Bluetooth

asked 22 Dec 2018 at 09:45 PM

David Miller
Showing results 1 to 20 of 109
Loading - please wait...