I recently updated my 5th gen Ipad to an Ipad Air 4 and can no longer use the Code app. I receive the following error when opening the app and can do nothing except close it - "Context3d not available! Possible reasons: Wrong renderMode or missing device support"
With no app support available, this amp is dead weight in the studio.
i have removed the app, restarted ipad, reinstalled it, and end up at the same error every time. Is the Ipad Air 4 supported at all? IOS version is 15.4.1
This issue is driving me crazy. My Code 50 used to work with my iphone and ipad, now it refuses to connect and I always get the above message.
I have performed the following:
1. Forgot bluetooth connection on both devices
2. Deleted iphone app and re-installed.
3. Re-paired and tried to connect with same issues,
4. Formed factor preset of amp with no luck.
I know the blueotth connects as I can play music through my amp from phone, I just cannot connect to update any presets.
Any solutions would be greatfully received, am getting so frustrated with this product.
I recently got a new iPadPro. I can Bluetooth to my Code25, but when I open the MyMarshall app I get the following: "Context 3D not available! Possible reasons: wrong renderMode or missing device support." What does that mean and how do I get the app to open? I deleted the app and reinstalled and have powered the 25 down and restarted.
I just bought the code 25, and only had it for a few days. It was great on my iPad for effects via bluetooth, although after I updated the firware it wont connect to thre app on my ipad anymore, it plays songs from my itunes app but the Gateway app says Im already connected and nothing works to adjust the affects. Im really bummed about this, any word on why this is happening and how to fix it?.
I've just recently bought the Acton II to have as a speaker in our bathroom. Looks great and sound good enough. So far I'm satisfied.
However, the speaker is driving me mad. Here's why.
My girlfriend and I both use the speaker whenever we're spending time in the bathroom, so both our phones have been connected to the speaker at some point.
But, if I'm playing music from my iPhone to the speaker and my girlfriend is in another room, let's say, watching YouTube on her iPhone things get wierd. If she adjusts the volume on here phone it also messes with my music in the bathroom.
Playing music from phone 1 to Acton II. then, Adjusting the volume by using the buttons on the side of iPhone 1 also adjusts the main volume of phone 2. Even though Phone 2 isn't in use. It just messes with the volume of it.
This is suuuuuper annoying. Since the app is no where near of being good, I don't know how this can be solved. If there's no good solution I'm gonna have to sell the speaker and buy a brand that really knows how to make speakers for this purpose.
Does anyone know if this can be fixed..??
thanks / Mathias
Hello - After really enjoying the Kilburn II speaker, I bought two Acton II speakers to couple them for ambiant sound when not using traditional speakers since you can't couple Marshall's wireless speakers. The Acton II is fantastic for sound and range individually *before* my attempt to couple them. I've had many complex compatibility issues with products over the years, but in this case, it's most puzzling why two same-model "coupled" speakers can be controlled via the iPhone/iPad I paired with them, as well as with the Marshall app (volume/sound settings) but cannot in any shape or form maintain simultaneous outputs even when they're placed right next to each other (well within the 10-meter Marshall spec). So before returning them back to store, I wanted to check with other customers if they've ever truly achieved the goal of coupling two Acton II's with both of them continuously and consistently playing in tandem without streaming drops. Thank you for letting me know,
What I've tried to so far:
- Followed Marshall's pairing/coupling intructions word-by-word. Though their instructions are incomplete and way below their reputation.
What's more disappointing is the prompt you get in the app to "stay connected to Acton II but disconnected from Acton II in Bluetooth settings." Anyone know what that means?
- Tried two iPhones and an iPad (all latest iOS).
- Deleted, rebooted, and re-installed the Marshall Bluetooth app (v1.3.1) for iOS.
- Moved the speakers next to each other to eliminate distance argument.
- Tested each speaker with direct Bluetooth to iPhone/iPad source without any issues. In fact, range is so much more when not using the Marshall app to stream to the speaker.
- Factory-reset the speakers.
- End result: The only way I was able to have them coupled was ignore their instructions, couple the speakers and then completlely shut down their app. after they show as coupled . However, there's no way for them to continuously and play in tandem (even sitting right next to each other with source iPhone/iPad next to them). They continue to switch between each other.
- Also, Marshall needs to be clear that a "couple" can only function with one lifetime source. As soon as you try to use the speaker "couple" on another source device, you lose everything on the previous device and need to de-couple, forget speakers, re-add speakers to your device's Bluetooth, and then pray that the Marshall app will allow you to couple them again. Most of the 18-20 times I tried the whole process, I needed to uninstall their app, reboot device, and re-install their app. :(
Any help deeply appreciated before I return these speakers.
"Context3D not available! Possible reasons: wrong renderMode or missing device support" error message on iPhone 11. All I see when I open the app is a red bar with the error message in white letters. Any idea how to fix this?
I just bought a marshall code 25, and when installing the marshall gateway app on mu iphone 12 (ios 14.8.1), and open app i get the following error: "context3D not available! Possible reason: wrongrendermode or missing devicr suport. " and it does not work. What I can do?
Hi there, just purchaced a Code 50, installed the Gateway app for iPad. All working a treat, eccept that if I am connected to the Amp via bluetooth, I am getting all the keypad sounds through the amp, also incoming messages, email notifications and phone calls. is there a way of stopping this????
Hello. I recently bout the CODE 50 and it's great, but the gateway is pretty much useless for me. I have tried pretty much everything and it still will not connect to my iPhone 11 pro max. I have had friends try the app and it works fine on their phone, but when it comes to mine, nothing! Really love the amp and would like the bluetooth to work from my phone so i can adjust with ease. Not the end of the world, but it is advertised that you can control everything from your phone so that's what i would like to do. Any solutions? Thanks.
Update to below- The iPhone 11 IOS 15.02 update fixed my issues. The app is working properly now & I'm very happy.
____________________________________________________I had a fault code & couldn't connect Gateway to my Code 50 a few months ago when I purchased it. I tried deleting the app to reload but when I reloaded, it was only accessible via the App Store & wouldn't appear on my Home Screen. I could connect for awhile. Recently it seems since the IOS 15 update to my phone, it no longer connects manually or automatically to my Code 50. The app is useless to me. I've search for an alternate app from another source that is compatible with the Code 50 but there doesn't appear to be one. The Gateway app and Bluetooth connectivity heavily influenced my purchase decision. If I had known the app was useless and I would have to physically go to the amp and try to dial in each sound, I would have just bought a fender. I really feel you should take my amp back if you can't correct the problem.
Bought a marshall acton II today and I'm unable to play music from my phone on it. It does not show on airplay either while connected on app. I suspect it's broken on ios15. Hope it gets fixed soon or Im requesting a refund as right now it's just standing as decoration.
While using the Marshall Gateway App on my iPhone 7 or SE (I'm assuming this happens on other iPhone models as well), the "Playback" page automatically defaults to "Apple Music" when I want to add tracks to jam to with my Code 50 amplifier.
My question for Marshall Support is: Can you make the iPhone Gateway App allow selections of tracks from locations other than "Apple Music" on the "Playback" page?
It would be great to be able to select tracks from my other files like "One Drive" or "Files". Your competitors like the Boss GT-1 and the Spark 40 allow tracks to be added from ANY location when using their jam-along features. Limiting your choice to "Apple Music" really limits the jam-along experience on your app.
Thank you for considering making this useful update to your iPhone app.
I uninstalled the gateway application on my iphone because it did not work well, I reinstalled it and on the screen it tells me
( Context 3D not available posssible reason wrong render mode or missing device support ), Could you help me?
Hi, I tried to install mygateway app into my iphone X. It was successfully installed but I could not open the app. It shows error message in the phone screen.
Can you please help. Thanks
My new Code 50 Amp won't connect to my iPad. They are paired via Bluetooth, and Gateway detects the amp. When it tries to connect, it perpetually displays 'Connecting........'
What am I missing?
Hey Fellow Marshall Code enthusiast...As most of you are. I like to use all the features of my equipment hence the Marshall gateway. The short is after months of not getting it to connect to my iPhone I thought let me try the Gateway on my iPad Mini 2?? Aha it works...So the iPad is using iOS 12.5.2 and my iPhone uses iOS 14.4.2. I always keep any of my software up to date with rare exceptions..So it seems the problem is with the Gateway and the newer iOS? So maybe the gateway needs to be updated to work with the latest iOS? Hope this helps?
Looks fine on the My.Marshal site, but not within the app.
Hiya, I have the Code 25 Amp and have for the last couple of years. I have recently updated my phone to an Iphone 12 pro.
The Gateway App has installed on my phone. My setting are saying the Code 25 is connected via bluetooth, but the Code 25 and the Gateway App are not connecting.
I have removed the Gateway App from my phone and re-installed it as advised and have re-connected the Bluetooth from the phone to the Amp once again as advised.
I try to scan for the amp but it will not connect via the bluetooth.
Can you please help with a solution.
I have just bought a CODE 25 amp and i am having trouble pairint it with the Gateway app.
I have done all the suggested processes, reboot, re install etc etc...
It was working yesterday afternoon, then in the evening it just will not connect?
The amp connects to th iphone 7 plus, finds the amp in the menu but wont connect, just keeps saying Connection Rejected!
So frustrating, please can you help?