Questions
Showing results 1 to 10 of 10
0

votes

1

answer

490

views

Hi everyone :) 

I'm a total beginner when it comes to tube amps as it's my very first one.

I've got that weird feeling that something is wrong with my Origin 20C, when I push the gain to its max I don't get that sexy crunchy tone.

I can see the lights of all the 3 preamp and power tubes through the grid. 

If one of them was dead It shouldn't be lightened at all right ?

I thought I had to wait for 30s before pushing the master and play but saw later on the notice that they recommend to do it 2 minutes after turning amp on.

Plus, one our two times and used to transistors amps, I didn't wait at all. Could it caused the issue?

I don't hear any particular cracks, just a bit of white noise when I push it all up

 

Thanks you all !! 

edited 23 May 2020 at 07:34 PM

Charly CARRELET

asked 23 May 2020 at 07:30 PM

Charly CARRELET
0

votes

2

answers

390

views

Recently bought a DSL1HR head and was wondering,
is it safe to use the Fx Send
of the amp when a cabinet or a loadbox is disconnected?

From the manual it seems that when headphones are connected to the emulated out,
an internal load is placed on the amp so a speaker doesn’t need to be connected.
Could I plug a headphone adapter as a “dummy” connector to this
and then plug the heads FX Send into another amps FX Return?

asked 20 May 2020 at 05:13 PM

Mikko Ahokas
0

votes

2

answers

733

views

Hello. I have a Code 50, and I found a DSL100H and a 1960 cab on craigslist yestarday for a good price so I snached them up!

So what Im planning to do is get an 1/8 to 1/4 adaptor and using the headphone out jack from the Code 50 as a effects brick for the DSL100 as the 50 has no out jacks other than the headphone one. Itll be a few days before the adaptor arrives so I thought Id ask how well this will work so Im not so disappointed, lol.

Ive done this before hundreds of times with non tube amps, but I dont want to blow up my new babys tubes.

Ive only had the code for about a month or so. If this doesnt work, Im planning on trading the Code in for a rack effects brick. Or mayber getting a mixer and routing the USB output that way..

Advice?

Thanks!

 

 

edited 23 Sep 2018 at 09:43 PM

m j

asked 23 Sep 2018 at 02:56 PM

m j
0

votes

1

answer

629

views

Hi, all.

When I choose "Natural" in preamp section, BASS and MIDDLE knobs work in normal way, but TREBLE doesn'tchange EQ at all. I've checked it on two CODE 25 amps - in both cases this issue appears. As all other preamps work OK, so I assume it's a software problem. Am I right?

Regards, Jacek.

edited 13 Sep 2018 at 12:16 PM

Jacek Klimkiewicz (170)

asked 13 Sep 2018 at 11:22 AM

Jacek Klimkiewicz (170)
0

votes

2

answers

844

views

Hi,

Could anyone tell me which Pre Amp valvel to order for my 2525c?

Its just over 1 year old, likely 700 hours playing, and has an unwanted noise. If I play a B or B#, then there’s a rattling sound, can only describe it as china / porcelain rattling, like a cup on a saucer vibrating as a vehicle passed. Weird description I know. Definitely coming from amp and tried to by pass all pedals, still happens. Ive checked every screw etc, most people more knwoledable than me says its the pre amp Valve. 

asked 01 Feb 2018 at 02:49 PM

Craig Gabell
0

votes

0

answers

868

views

Hi there

I'm a new member of this interesting forum.

I use a preamp JMP 1 through a Power Amp 9100. Vintage now, yes. 

Are there users of this equipment, in order to exchange tips and comments?

Thanks,

Ariel

asked 19 May 2017 at 01:29 AM

Ariel Stratobanez
0

votes

1

answer

629

views

                Is one of these driving the left channel and one right ?  the two speakers appear to be two seperate channels,  black/white and red/brown

 

asked 22 Feb 2017 at 07:55 PM

Todd P Lippe
0

votes

1

answer

532

views

I have asked this question before. Although someone appears to have answered it I cannot access the answer.

Clicking on the link just leads to a 404 error.

 

Using the emulated output into a Focusrite interface the LED's are red even with the preamp set to 0.

Is this how it is supposed to work? I would have thought an 'emulated output would be at line level.

asked 26 Jan 2017 at 02:16 PM

Stephen Galvin Last Name
0

votes

3

answers

1.1k

views

Using the emulated output into a Focusrite interface the LED's are red even with the preamp set to 0.

Is this how it is supposed to work? I would have thought an 'emulated output would be at line level.

asked 15 Jan 2017 at 02:28 PM

Stephen Galvin Last Name
1

vote

0

answers

929

views

Hello,

which Pre Amp Model in an Code 50 amp comes closest to a Marshall Major 200W?

Regards,
Torben

edited 08 Jan 2017 at 12:21 AM

Torben Keller (17)

asked 08 Jan 2017 at 12:19 AM

Torben Keller (17)
Showing results 1 to 10 of 10
Loading - please wait...