Questions
Showing results 1 to 20 of 236
0

votes

2

answers

62

views

On the Marshall code 100 amp, is there a way I can connect Bluetooth headphones and my phone at the same time? More info in comments.

I have a new baby, so I was wondering if there is a way to stream music from my phone to play along with through my wireless bluetooth headphones but also so that the guitar noise comes through the headphones. I image? it I had wired headphones that would work but I don’t want to buy new headphones with a super long cord just for this reason lol

edited 26 Apr 2022 at 05:49 PM

fincher david

asked 26 Apr 2022 at 05:45 PM

fincher david
0

votes

1

answer

70

views

Hi folks,

Reently got myself a CODE25, however I couldn't manage to get it connected to my phone. I assume its due to faulty bluetooth module, because when I turned on the amp, bluetooth version field is missing on the screen. The amp also did not show up on my phone although bluetooth pairing mode was activated.

I did follow the troubleshooter but it didn't help.

Updated to the latest firmware (1.46)

Anyone experiencing the same? Any suggestion how to fix this?

edited 23 Apr 2022 at 04:20 PM

Eldo` Baidowi

asked 23 Apr 2022 at 04:00 PM

Eldo` Baidowi
0

votes

1

answer

64

views

I turned on bluetooth on my  phone then initiated the bluetooth feature on my code100. find the amp in the It found the amp on my phone so I connected to it and the blue light on the amp quit flashing indicating that they are synced together. When I open the gateway app on my android phone (samsung S20E) it will not find the amp in the menu section of the app. I see the blue tooth symbol there with the word CODE next to it and it says not connected. There is nothing next to the Amps Detected: and when I scan for an amp it turns gray for a few seconds and then back to green. Same thing when i switch between the phone and amp icon in the bottom left corner. when on the phone icon i have presets when I switch to the amp Icon I get nothing displayed. I do have audio .from phone to amp and that s what it says in the blue tooth section in my phone. It says that the code V020150FDU connected for audio

asked 19 Apr 2022 at 12:47 AM

Ricardo Salinas
0

votes

4

answers

104

views

This issue is driving me crazy. My Code 50 used to work with my iphone and ipad, now it refuses to connect and I always get the above message.

I have performed the following:

1. Forgot bluetooth connection on both devices

2. Deleted iphone app and re-installed.

3. Re-paired and tried to connect with same issues,

4. Formed factor preset of amp with no luck.

I know the blueotth connects as I can play music through my amp from phone, I just cannot connect to update any presets.

Any solutions would be greatfully received, am getting so frustrated with this product.

asked 27 Mar 2022 at 11:37 AM

Geoff Ward
0

votes

0

answers

186

views

Hi guys,

i have a marshall code 25 and i have a problem when i link my phone via bluetooth and via jack to have a backing track while i'm playing guitar.

via bluetooth the sound is like in a shell, is not clear and brilliant, but like closed, sorry i can't explain well. Like the treble very low, and the middle and bass high

via jack in the ipod input i need to raise the master volume to the top to hear something but is very low.

A friend has a marshall 15watt without bluetooth but with the ipod input. When i link the phone there, the sound is not affected by the master volume but only by the phone. And the sound is good like directly from the phone. The pots on the amp changes only the sound from guitar like normal use.

What can i do? Could you help me?

Thanks!

asked 21 Mar 2022 at 11:53 AM

andrea gregorio
0

votes

0

answers

236

views

I seem to be having the same issues that a lot of people have reported, where I cannot get the Marshall Gateway app to connect to my Code 25. I've only had the amp for about a week and I cannot get the app to see it. ? 

I can connect to the amp via Bluetooth using my phone (Samsung S10, Android 11) and whilst connected, can use it as a BT speaker to play music from Spotify. However, nothing I do seems to get the app to connect to the amplifier. 

-I've updated the amp to the latest firmware using my laptop/web browser. 
-I've followed all the instructions in the Bluetooth Connectivity Troubleshooter to the letter (CODE - Gateway Bluetooth Connection Troubleshooting - my.marshall.com)

No matter what I do, or what order I install/uninstall/connect, the app will not see the amplifier. Everything works otherwise - I'm able to apply Patches from ? using a USB connection - and the amp sounds great. I'd just like to be able to control it from my phone.

asked 19 Feb 2022 at 11:19 AM

Todor Valkov
0

votes

4

answers

343

views

I just bought the code 25, and only had it for a few days.  It was great on my iPad for effects via bluetooth, although after  I updated the firware it wont connect to thre app on my ipad anymore, it plays songs from my itunes app but the Gateway app says Im already connected and nothing works to adjust the affects. Im really bummed about this, any word on why this is happening and how to fix it?. 

asked 06 Feb 2022 at 05:13 AM

Barbara Andrews
0

votes

1

answer

166

views

Hi,
I tried to connect Marshall Gateway App to Code 25. (Firmware v1.46)
While Bluetooth connection between mobile and Code25 basically is set up and I can even stream music to it,  the app says "You may only control amps you are already connected to for audio output".

I cannot connect the app to the amp.

Maybe anybody can give me a hint.

Cheers,

Martin

 

asked 19 Jan 2022 at 09:01 PM

Martin Hollinger
0

votes

0

answers

194

views

Hi

I have a code 25. I just bought a new laptop. it had windows 10 but decided it wanted windows 11 so updated it, now my code 25 is paired but if I connect it. It says connected for a few seconds and then goes back to connect. So I can listen to my online lessons through my headphones. Anyone else experience something similar.

Thanks

asked 02 Dec 2021 at 03:47 PM

Bill Jones (1)
2

votes

1

answer

246

views

hy

marshall gateway app is not working with android 11 version

the bluetooth connection is in place (blue light is in on) but opening the Gateway App the connection to the amp is not detected

can you please give me the info to solve the issue?

i've tried with another phone with android 10 sw version and the app is working

I think the app need some update to fix this bug (my version is 1.5.5 )

please consider that android 11 will be the standard for the most part of your code owner in the world

best regards 

Luigi

 

asked 26 Nov 2021 at 08:26 AM

luigi pagani (2)
0

votes

0

answers

189

views

Hi there, just purchaced a Code 50, installed the Gateway app for iPad. All working a treat, eccept that if I am connected to the Amp via bluetooth, I am getting all the keypad sounds through the amp, also incoming messages, email notifications and phone calls. is there a way of stopping this????

asked 14 Nov 2021 at 08:16 PM

Christopher Read
0

votes

1

answer

213

views

The Marshall Code 50 I bought losses sound while in use. Turn the power on and off sometimes fixes it and also disconnecting it from the bluetooth device. However, recently I don't even connect a bluetooth device like my phone to avoid it, it still happens. Already tried installing the lates firmware, done factory reset, and still having this problem. I'm from the Philippines, the seller did not reply when I asked for assistance. I also don't know where I could bring it for technical support.

asked 04 Nov 2021 at 07:16 AM

Roger Brigido Lagatic
0

votes

1

answer

203

views

Hello. I recently bout the CODE 50 and it's great, but the gateway is pretty much useless for me. I have tried pretty much everything and it still will not connect to my iPhone 11 pro max. I have had friends try the app and it works fine on their phone, but when it comes to mine, nothing! Really love the amp and would like the bluetooth to work from my phone so i can adjust with ease. Not the end of the world, but it is advertised that you can control everything from your phone so that's what i would like to do. Any solutions? Thanks.

asked 20 Oct 2021 at 11:15 PM

Gabriel Loza
0

votes

2

answers

227

views

Update to below- The iPhone 11 IOS 15.02 update fixed my issues. The app is working properly now & I'm very happy.
____________________________________________________I had a fault code & couldn't connect Gateway to my Code 50 a few months ago when I purchased it. I tried deleting the app to reload but when I reloaded, it was only accessible via the App Store & wouldn't appear on my Home Screen. I could connect for awhile. Recently it seems since the IOS 15 update to my phone, it no longer connects manually or automatically to my Code 50. The app is useless to me. I've search for an alternate app from another source that is compatible with the Code 50 but there doesn't appear to be one. The Gateway app and Bluetooth connectivity heavily influenced my purchase decision. If I had known the app was useless and I would have to physically go to the amp and try to dial in each sound, I would have just bought a fender. I really feel you should take my amp back if you can't correct the problem. 

edited 15 Oct 2021 at 01:05 PM

Eric Blomquist

asked 11 Oct 2021 at 02:26 AM

Eric Blomquist
2

votes

1

answer

385

views

Hello, I bought a Marshall CODE 25 yesterday, and so far I love the sound and feel of the amp. But I am having the same issue that alot of people are having, I can connect to the amp via my phone's Bluetooth but the amp will not show up in the Gateway app.

I have tried everything in the FAQ troubleshooting guide, nothing works. I can play music to my amp but that's it. Feels like a problem with the app and not my phone.

Are you reading the forums, Marshall? You need to take a look at your app, seems like it has some compabillity issues, it's working for some people but not everyone. 

I have a Samsung Galaxy S8.

 

Please fix.

edited 28 Sep 2021 at 04:50 AM

Ruben Eriksson (2)

asked 28 Sep 2021 at 04:40 AM

Ruben Eriksson (2)
0

votes

1

answer

241

views

Hi, all together!

Pressing REV and POWER starts Bluetooth-Pairing - so far no problem. Also, the amp will also connect automatically when my phone is "near" without any problems.

Now my question:  Is there any way to really "turn off" Bluetooth so the amp does not "search" für devices anymore?

Thx in advance!

asked 24 Sep 2021 at 04:11 PM

Mark Lüttger (31)
0

votes

1

answer

321

views

I seem to be having the same issues that a lot of people have reported, where I cannot get the Marshall Gateway app to connect to my Code 25. I've only had the amp for about a week and I cannot get the app to see it. ? 

I can connect to the amp via Bluetooth using my phone (Pixel 3a, Android 11) and whilst connected, can use it as a BT speaker to play music from Spotify. However, nothing I do seems to get the app to connect to the amplifier. 

-I've updated the amp to the latest firmware using my laptop/web browser. 
-I've followed all the instructions in the Bluetooth Connectivity Troubleshooter to the letter (CODE - Gateway Bluetooth Connection Troubleshooting - my.marshall.com)

No matter what I do, or what order I install/uninstall/connect, the app will not see the amplifier. Everything works otherwise - I'm able to apply Patches from ? using a USB connection - and the amp sounds great. I'd just like to be able to control it from my phone.

edited 03 Oct 2021 at 01:11 AM

Harleigh Maguire

asked 16 Sep 2021 at 03:16 AM

Harleigh Maguire
0

votes

1

answer

254

views

Just go a Code 50 and love it but the bluetooth signal keeps dropping. Im still connected but the sound always cuts out. There is also a light but noticable static sound that is alway there that does not get louder with volume. It shows I have the latest firm ware update. Ive tried unpairing and repairing but it still does it after a while.

asked 06 Aug 2021 at 03:23 AM

Zane Unruh
0

votes

0

answers

215

views

Hola!!! ya hace unos 5 años me compre un Amplificador Marshall code 50, el cual estoy enamorado, pero desde que lo compre nunca pude lograr conectarlo al bluetooth. 

probe de las mil maneras pero no hubo caso. Directamente mi smartphon no lo detecta.

Alguna solucion???

asked 27 Jul 2021 at 03:58 PM

Alejandro Oxilia
0

votes

2

answers

274

views

bluetooth wont connect with my code 50 it connects for audio but cant acess amplifier settings and parameters keeps showing passkey code on my phone but wont let me enter the passkey code anywhere tried everything still wont connect to amplifer to acess my code 50 HELP!!!!!!! Jimmy Rumsey

asked 04 Jul 2021 at 08:12 PM

Jimmy Rumsey
Showing results 1 to 20 of 236
Loading - please wait...