Hi, I just recieved my Code 50 yesterday "bought brand new" and the amp sounded great until i hooked up to my pc this morning and downloaded a featured preset not a communiy preset. I am running usb not bluetooth and its my studio setup. Now all the distortion and gain sounds like the input gain is wide open clipping the signal coming in at all volume levels, and on all distortion and od gain presets. I tried to reset the amp and did a firmware update now its litterally so bad you cant play it. This is certainly a software issue cause the effects and clean tones sound fine. This happened immediatley after i sent the preset usb from the website to the amp from the pc. Also i tried several guitars, usb cables, guitar cables and even my mac. just dont know wether i should send it back or if thiscan be fixed with a firmware patch or something , Thanks
I have a Marshall Code 50 running MCU version 1.44 and Gateway (Android version 1.5.5) on a Samsung Galaxy S9+ running the latest OS. I can bluetooth pair to the amp and play music, but can not connect to the amp to change my presets from the library. I have reloaded the latest firmware on the amp, deleted and reinstalled the Gateway app, paired and unpaired several times. Nothing seems to work. I even grabbed my old Galaxy S7 Edge phone and that Gateway app on it does the same thing. Does my amp need to be serviced for Bluetooth connectivity?
Hi I have a CODE 100H head/cab and a CODE 100 combo both with the latest firmware re-installed from Marshall and both have this issue, i.e. the amp very oftenn completely freezes when I save a preset.
Steps to reproduce:
- Modify any patch on the front panel
- 50% of the times the amp seems to freeze. The preset is saved but you can no longer change preset and there is no sound coming out.
The same happens if you modify a patch from the iOS app via bluetooth and then save it from there.
It's REALLY frustrating and I can't believe I didn't find anything on this forum under the "crash on save" keywords. Seeing it happens on both of my CODE units it much be a software bug, I don't think it has anything to do with my units.
Anyone else has seen this problem?
Marshall finally released V1.43 of the Code Firmware. My phone finally connects reliably over Bluetooth which is a plus. It sounds like 3 different devices can now be paired too. A little disapointing that no other presets or other functionality was added but at least this major issue was fixed albeit after a UNACCEPTABLE time frame. I expect more from Marshall.
Hello, I have acquired the CODE 25, really an excellent amplifier, very versatile and very good presets. My problem and please I hope you help me to resorve it, is that even though I can connect via Bluetooth, I can listen to my tracks ....... the big problem is that when I want to use the FX or presets it appears that there is no amplifier connected ... (either from my android phone or my Ipad I ... I do not understand what the problem is.) Secondly, when I want to install the MARSHALL FIRMWARE UPDATE UTILITY, to enter presets or update the ampli, does not recognize the connection.I request guidance to be able to make full use of such a beautiful tool for my music.I use Widows 10 and G. Chrome.For your attention, thank you very much
firstly, i am disappointed with the code. this amp seems like its still at test phase, its to buggy for a release. would expect marshall to only release a new product unless its 100% reliable.
connecting ios devices to code is always problematic. very unstable.
my main problem now is updating firmware. cant update in chrome. i have midi capability approved for marshall but keep getting midid disabled error even though i clearly have midi enabled.
tried opera, and the midi is working and the code is coming up as connected. i get as far as a message stating that firmware is updating with a status bar and percentage marker. doesnt update! stays at 0% and never moves. left it overnight and still 0% when i woke.
i have spent more time messing about with the problems with this amp than playing guitar. do i need to sell this and just buy a guitar interface? maybe
also, when using this amp through garageband there is no dedicated clean preset to use with garageband or other AU. basically it goes into garageband with a marshall preset and then the other AU preset is on top of the marshall preset. ideally this amp should include a straight clean unprocessed preset to work with other software AU's. i really do think people need to consider a good quality guitar interface before purchasing this amp. its very restricitve and unreliable. if you are not gigginG i dont see the point in this amp.
CAN SOMEONE HELP ME WITH THE FIRMWARE ISSUE ASAP!
I just bought this amp yesterday after flirting with a Blackstar HT20 and realising I wanted a Marshall again. Well, starting to wish I hadn't bothered.
Like so many others, I can get my phone (Samsung Galaxy S5) to connect to the bluetooth and actually play music through the amp. BUt Gateway will not find the amp within the menu. I've tried all the uninstalling Gateway, reinstalling, updating the amp's firmware - even tried using my daughter's Samsung S4-mini which again, connected to the audio but will NOT FIND THE AMP!
I have a Samsung Galaxy Tab 4 which is a good wee tablet but apparently isn't compatible with Gateway.
Seriously. So I have 3 different devices and not one of them can connect to my new amp. Clearly this is a fault with the amp itself since the same thing happens with two different phones.
Please don't tell me to go through that long list of uninstalling, reinstalling, removing the bluetooth device and reconnecting etc etc. I've been doing all that since I got the damn amp yesterday afternoon. 24 hours later and none of it has worked.
Is it at all possible this is going to be addressed SOON in either a Firmware or Gateway update? Clearly, if the amp is faulty I will need to return it soon to get my money back but, honestly, I'm loving the sounds I'm geting with the presets, I just want to edit them rather than all the hassle of returning the amp to the shop!
I saw a review on the Google Play Store for the Gateway app from a guy in June 2016 - that's 7 months ago - and he was having the exact same issue. So if it's not been addressed in all that time and Marshall are still sending out these faulty amps, what hope for a fix? Please tell me there is one!