Questions
Showing results 1 to 20 of 69
0

votes

1

answer

146

views

Marshall Code 25 Bluetooth not working !!!!

i try to update firmware to 1.44, i try with diferente phones, android/ios/tablet etc.... wont detect nothing.... bluetooth Marshall not appear!... 

Marshall apps is a fucking crazy bad... and support too.....

Need help please. I love my marshall code 25, but without bluetooth i send it back....

CODE Bluetooth Firmware

asked 28 Dec 2019 at 06:39 PM

andre Sarabando
1

vote

5

answers

187

views

Hi I have a CODE 100H head/cab and a CODE 100 combo both with the latest firmware re-installed from Marshall and both have this issue, i.e. the amp very oftenn completely freezes when I save a preset.

Steps to reproduce:

- Modify any patch on the front panel

- Save

- 50% of the times the amp seems to freeze. The preset is saved but you can no longer change preset and there is no sound coming out.

The same happens if you modify a patch from the iOS app via bluetooth and then save it from there.

 

It's REALLY frustrating and I can't believe I didn't find anything on this forum under the "crash on save" keywords. Seeing it happens on both of my CODE units it much be a software bug, I don't think it has anything to do with my units.

Anyone else has seen this problem?

 

Thanks!

CODE Gateway Bluetooth iOS Presets Firmware

asked 23 Dec 2019 at 11:45 PM

Lele X (11)
0

votes

2

answers

146

views

Yesterday I bought a second handed CODE 50. There were no problems at the buyer's house, but when I tried to make a bluetooth connection at home, it failed. I restored the factory settings and updated the firmware to version 1.44. I still can't make a bluetooth connection (iPhone 6s, iPhone X, iPad, MacBook Pro, all with the most recent iOS and MacOS versions) and now also the amplifier loudly knocks every 3 sec. I tried all suggested solution, but still no bluetooth connection. And the knocking sound is really annoying! How can I solve these problems?

 
CODE Bluetooth Firmware Knocking

asked 14 Nov 2019 at 07:50 AM

Kai Bouwhuis
0

votes

2

answers

272

views

I have a code 50 and am trying to update firmware. I have an iPhone X with the Chrome app installed (newest version). I am logged into my Marshall and the gateway app. The gateway app shows I am connected via Bluetooth, but on the my Marshall firmware download page it says I am not connected and my browser doesn’t support download. 

It’s very frustrating, Marshall or any support appreciated.

CODE Gateway Bluetooth iOS Firmware

asked 19 Sep 2019 at 04:03 AM

Mar Fede-mac
0

votes

2

answers

278

views

Just bought my Code 50 tried to connect the Gateway App to either my iPhone 7 or iPad Air 2.

Did a firmware update to 1.44 , the amp is paired in Bluetooth but when in Gateway, it just says it is connecting but never does.

I have tried reinstalling the firmware, forgetting the edvice and re-pairing, removing all other BT devices etc. etc. but still it will not connect.

UPDATE: this was an iOS issue, not the amp. The latest update to iOS beta 13.1 resolved it. 

 

CODE Gateway Bluetooth iOS Firmware

edited 07 Sep 2019 at 06:17 AM

Steven Clarke

asked 31 Aug 2019 at 04:56 PM

Steven Clarke
0

votes

1

answer

189

views

The iOS Gateway app was unable to connect to my CODE 50 even though my MacBook Pro is connected via bluetooth, so I did a factory reset and then tried to do a firmware update. The first part of the firmware update (1.44) appeared to install correctly. Next I saw a DSP update and tried to apply that update. In the middle of the DSP update, I received an error message to the effect that the update failed and I should power off & on my computer/device. I powered my Mac off & on, but the CODE 50 shows a progress indicator (about 20%) and says "DO NOT SWITCH OFF."

I tried to reinstall the firmware/DSP update, but this time the update process would not even begin. I suspect the  problem is the frozen progress indicator and whatever ongoing or frozen process is causing the "DO NOT SWITCH OFF" message.

Othe than ignoring the warning on the CODE 50 and powering it off & on, I don't see what else I can do. Is there a way to abort the ongoing or frozen process without turning the CODE off.

What should I do?

CODE Gateway Bluetooth iOS Mac Firmware

edited 28 Aug 2019 at 03:47 AM

Jim Marshall (12)

asked 28 Aug 2019 at 02:06 AM

Jim Marshall (12)
0

votes

1

answer

243

views

Hi,

I have a problem with my new Stockwell II. It plays the Bluetooth connection sound while playing music with my iPad Air, which is only 10 centimeters away.

The intervall between this sounds is not constant, between 30s and 15 minutes. But quite annoying. Music playing is not interrupted.

Any ideas what to do? Maybe a firmware update? (But my windows 8.1 pc doesn't recognize the speaker.)

Thanks!!!

Bluetooth iOS Speaker Firmware

asked 25 Aug 2019 at 07:22 PM

Astra Geh
0

votes

0

answers

170

views

To all,

I notice latest firmware update v 1.44 july 2019, improves master volume control, it doesnt spike like it used to, can someone confirm this, what other changes are there ?besides bluetooth improvement also

 

Bluetooth Firmware mastervolume

edited 08 Aug 2019 at 11:49 PM

Ricardo Rivera

asked 08 Aug 2019 at 11:36 PM

Ricardo Rivera
0

votes

3

answers

284

views

I just bought a CODE 100 combo. Bluetooth audio is pairing just fine but the app never finds or connects to my CODE!

I tried everything, i even uninstalled the app rebooted the phone and started from scratch following your guide but still no luck.
Galaxy s9+ up to date CODE firmware 1.44 and gateway app 1.5.5

Fix this please

CODE Gateway Bluetooth Firmware

edited 12 Jul 2019 at 08:03 AM

Cris Lebrun

asked 11 Jul 2019 at 10:18 PM

Cris Lebrun
1

vote

1

answer

322

views

Dear Marshall Team,

It took some time, almost a year, but finally we got the long awaited update of the firmware to fix the painful Bluetooth issue on CODEs. I installed it a few days ago (which was a bit of an issue as reported in another of my posts but finally succeeded) and now CODE does what it is supposed to do.  BT comes on and connects as it should every time I turn on the amp and start Gateway on my Ipad/Iphone.

I'm very happy that you could fix the problem and I encourage all brothers and sisters in pain to upgrade the firmware asap if they haven't done already.

In the light of this fix I think we, the community, may also forgive you that for months you told us that it is not a firmware issue ;-) 

So far I also think that the BT connection is more stable than it used to be. 

Now I can enjoy again my little CODE 25. 

Thanks, Alex F.

CODE Bluetooth Firmware Code25

asked 03 Jul 2019 at 08:28 AM

Alexander Fleischmann (14)
0

votes

1

answer

257

views

I just got this head recently and installed the latest firmware update the other night (6/20/2019).   When I try to connect my IPad through the My Marshall app it seems to be a hit or miss proposition but more miss than hit.   In my settings on the IPad it shows me as connected, and the blue light on the head goes from flashing to solid.  On the app, it shows the head detected but when I press on that I get a "Connection Rejected"  (You may only control amps you are already connected to for audio output) and there's no control over the head from the app.   Now several other times it syncs right up.  I'm at a loss though.  Am I doing something wrong maybe in the sequence (operator error) or is there an issue somewhere else.  The manual doesn't really reference Bluetooth that well.  I'm not bluetooth savy becuase I rarely use it except for my phone in the car and connection there is automatic after I initially set it up.

So is it me?  Is it the gateway software?  Is it the head??   Help please?

CODE Gateway Bluetooth iOS Manual Firmware

asked 22 Jun 2019 at 05:32 PM

Kim Lubstorf
1

vote

0

answers

180

views

It took more than a year, but still!

Finally the annoying Bluetooth problem is fixed!

The amp turns on Bluetooth after power on,  reconnects to the smartphone automatically without manual pairing and the application works fine (there's some problem with application scaling on LG G7 due to screen resolution, but I can live with that).

Thank you for this update, Marshall!

Even if the process was soooo slow that the 1-year warranty ended, it's good to know that you didn't abandon this product :)

Honestly I thought that we won't get any updates and I was surprised to see the Gateway application update and checked the forum just in case. 

Best Regards,

Ilya

CODE Gateway Bluetooth Firmware

asked 21 Jun 2019 at 06:55 PM

ilya macle0d (6)
0

votes

3

answers

231

views

After the last update my amplifier knocks every 3 sec, when I turn on the bluetoof stops. How to restore the earlier version of the firmware, I will add that the connection bluetoof does not work the amplifier is just not visible to other devices, please help.

Bluetooth Firmware

asked 21 Jun 2019 at 07:10 AM

Kacper Moker
4

votes

2

answers

375

views

Marshall finally released V1.43 of the Code Firmware.    My phone finally connects reliably over Bluetooth which is a plus.   It sounds like 3 different devices can now be paired too.    A little disapointing that no other presets or other functionality was added but at least this major issue was fixed albeit after a UNACCEPTABLE time frame.    I expect more from Marshall.    

CODE Bluetooth Presets Firmware

asked 14 Jun 2019 at 03:05 PM

Gary Hensley (4)
0

votes

3

answers

327

views

Hello everyone,,

Well,  I've read through all the questions and answers I can.  My Android used to pair fine with my CODE 50.  Now, it will not connect.  I've reinstalled firmware, reinstalled the Gateway app, deleted  nd re-paired the amp.  Very frustrating.  It  seems there are lots of issues with this.  I can hear the amp pair with the phone via bluetooth, but it will not connect with the Gateway.  "Connecting..." appears and doesn't go away.  I'm bummed.  This was a fun amp, but if the bluetooth doesn't work...  anyone got a fix?  Thanks..xvideos xnxx xxx

CODE Gateway Bluetooth Android Firmware

edited 29 Jun 2019 at 06:38 PM

Lincon gomes

asked 11 Jun 2019 at 07:20 AM

Lincon gomes
1

vote

4

answers

355

views

Hi Marshall,

The last firmware update broke the bluetooth autoconnection issue and it has been more than a year and a half and you never updated it. Last firmware update was at Oct 2017, so I made a decision, I posted my Marshall Code 25 on Marketplace so I hope I can get rid of it and get an amp that works properly or at least works as advertised.

I hope you fix the bluetooth issue before you loose more customers. I think I will never buy a Marshall product again.

CODE Bluetooth Firmware

asked 15 May 2019 at 07:48 PM

Julio Guerrero (1)
0

votes

5

answers

266

views

hi support

why do not you solve this problem???

my hardware:

Iphone X, iOS 12.1.4

Ipad Pro, iOS 12.1.4

Marshall Code 25, Firmware 1.4.1, date of purchase 12.03.2019

CODE Bluetooth iOS Firmware

edited 22 Mar 2019 at 10:31 AM

Jens Lubo (2)

asked 22 Mar 2019 at 09:58 AM

Jens Lubo (2)
3

votes

2

answers

419

views

I bought the combo yesterday and it's full of bluetooth bugs - looking now at the FORUM my impression is that the support doesn't care about it.

- No automatic bluetooth connection - iPHONE - I am having always to force Iphone to "forget" the AMP and pairing it again... each time...

- MAC IOS , When I try to connect the bluetooth in my MAC, it makes the system crashes, mouse and keyboard stop working... there's no were to get the necessary code to bluetooth connection...

DO WE HAVE PLANS FOR A NEW FIRMWARE TO BE RELEASED SOON ? PLEASE

 

CODE Bluetooth iOS Mac Firmware

asked 31 Jan 2019 at 11:33 AM

alexandre fabro (3)
2

votes

2

answers

457

views

Actually I'm totaly not interested in bluetooth connection, but of course I understand that it might be an essential prolem for some people...

But there are some other problems I'd like you to find good solution for.

1. Master volume. From 0 to 10% there is almost no sound, over 10% it becomes very loud. 

2. Decreasing sound level with Volume pot results in decreasing USB signal level - not acceptable for players using USB output for recording in DAW software. It would be nice if for clean preamp gain at 2 and volume at 3  give recording level about -6 dB, now it is about -36 dB... 

Best regards, Jacek.

P.S. What is a frequency range of CODE 25 speaker?

 

CODE Bluetooth Speaker USB Firmware

asked 24 Jan 2019 at 11:09 AM

Jacek Klimkiewicz (134)
Showing results 1 to 20 of 69
Loading - please wait...