New to the Code. Tryin to navigate the website some.
Question about user uploaded preset settings.
At the bottom of the setting description, I've noticed many times there will be an icon or pic of a Marshall cabinet with a red X thru it. My guess is that it means the cabinet simulation is turned off..??
Any clarification would be greatly appreciated.
Hello everyone, I own the Marshall CODE 100H and CODE 212 cabinet.I really love this amp, but I find the MY GATEWAY web page interface to be somewhat awkward to use. The following are issues that I would like to see changed.
1) On the My GATEWAY web page, the preset list at the top is arranged by columns (as it should be), but the MY LIBRARY list below that is arranged by rows.
2) There is no indication in the MY LIBRARY section on the MY GATEWAY tab whether a preset is or isn’t in the MY GATEWAY list.
Hello everyone from Portugal,
List of factory presets for CODE 100H head. From 2019, the presets are different than combo models. Rig info: the CODE 100H head and 4X12 cabinet.
My question is concerning the Code 100H. When using an external cabinet, is it better to use the preset power/cab selections or to turn them off. Does this apply to the Marshall code cabinet and any other cabinet, or just to a different cabinet ie: 2x12 Morgan ? Thanks.
I was wondering if the creator of the KASHMIR preset would be interested in also creating the FLANGER part for KASHMIR using all the current preset settings (amp, cabinet, speaker etc) as a complimentary preset for the turnaround section of the song. I believe, from forums, that a preset will switch better (Marshall CODE footswitch) if the preset has the same amp, speaker and or cabinet setting as it takes away the millisecond delay of switching between amps in a particular preset. Look forward to your answer and or creation of said beasty.
I have a Marshall Code 50. Not sure what’s happened but when I plug my guitar into it, I get no sound and the presets are now being controlled by the guitar volume knob. If guitar volume is full high, display on the Code quickly scrolls thru presets. If guitar volume is full low, you can individually scroll thru presets by quickly turning volume knob up then quickly back down. No volume from cabinet regardless of preset volume or master volume, only static. Have tried with both electrics I have and both cables, in various configurations with no difference.
Any help is greatly appreciated.
I have a code 100H connected to a 4x12 cabinet. I want to use my Boss ME-80, as I have stored a number of presets. I have plugged my guitar into the ME-80 and the ME-80 into the input of the amp, however the volume of the amp is significantly decreased, I have turned the ME-80 volume up to max with little affect, I have also turned all the FX on The code 100H off. The volume is very poor, worse with my Gibson SG, than with my Fender Strat. Is there a better way to set up my ME-80, e,g through the FX loop, and how would I do it. Would this solve the problem?
I'm running a Code 100h head through MG 4x12 cabinet. This set up is load at home, but a band rehearsal I can hardly be heard above the drums and bass.
That's with the patch volumes on 8-9 and master volume around 8-9 also.
Do I need to look at noise gate settings, presence, resonance etc or just put an EQ pedal in front of it?
I've heard others say that they gig regularly with the Code 100 without any issues.
Hello guitar players,
today I got my new Code 100 head and connected it with my 2x12 speaker 1936 from marshall. I tried the presets and they sound very cool but the sound is in my opinion a little bit to muffled and not clear enough.
So I kicked out the cabinet in the settings and then the sound is very clear and cool for me. But whats exactly the sense of the cab when it sounds not good in my opinion. Do I really need them?
Thanks for your answers! :)