I have  Marshall Code 100 and it is ususable because the presets keep changing by themselves. Is anyone else facing this issue? 

Hi. I have a Code 100 combo and I have been thinking of upgrading the speakers. Should I replace the stock speakers in the amp, or would it be better if I just bought an external cab and bypass the built in speakers? I have found that when I deactivate the cab simulator in the amp I get a more “defined” and less muddy tone, but sometimes it just sounds like “an amp without cab”, the sort of scooped sound if that makes sense, even if the sound comes out through the amp speakers which should be considered a cab. If an external cab is better, what wattage should it be? Thanks!

Hello everyone, I would like to ask you what is the best way to use a digital multi-effects pedal with the Marshall CODE 100C, how to connect it? how to configure it? etc. to make it sound good. Thanks

I have code 100 and I got (DigiTech Trio+) and I would like to know

how to connect them together properly 

I'm not sure if they work together or not???

Does the Marshall Code 100 take pedal well? 

I'm considering buying a wah pedal but I'm not sure if it will work well with the amp. 

Hi!

I bought a Marshall CODE 100w in Feb/21. It wasn't even used 10 times.

Yesterday when I went to turn on the equipment, the amplifier started to make a noise. I thought it might be the cable, but it wasn't.
Even without the cable connected to the equipment, the noise continued.

I reinstalled firmware but it didn't work either.

I do not know what to do.

Could you please help?

Many people are talking that the new CODE products with current manufacturing dates are already coming from the factory with the new Firmware 1.45, and that it brings many improvements and the equipment sounds better than with the 1.44 which is the last officially launched.

Please release this new 1.45 as soon as possible or at least let us know when its release is estimated on the official website Thank you

Does anyone know if these are still supported by Marshall and if they are discontinued as I've seen on  a retailer site here in the UK? I was looking at buying one but may wait for a replacement model.

Thank you.

Hi I have a 9 month old Code 100 Combo amp which simply has stopped working.  Any ideas?

Hi,

My Code 100 amp just dies off in the middle and comes back all of a sudden the volume just fades off for a while and it comes back at will. Even turning off the amp and on does not solve the issue but somehow after a while it becomes normal again. It seems to be some sort of a volume issue... When I crank the master volume knob to full , I hear faint sounds of my guitar. It comes back after a while automatically but then stops again at random. 

EDIT: found out that when I put my amp in bluetooth pairing mode it stops. Sound also comes out the speaker itself. So it's something internal for sure

----------

I have a CODE 100C and when I connect it to my interface with the HP out (or even the fx send -- or even when using the HP out as a HP out) I have this high end hiss/artifact.

Here is a recording of the sound: https://youtu.be/a9mjRFiqVX0
obviously it's not as loud as in the video.. but it's still there

Recording with the HP out is the best way for me to elimante latency, but the sound quality is just bad. Also with USB I can't get acceptable latency..

Where can you get a new master vol pot for code 100?? Mine has loud crackling and uneven volume increase-- it jumps and seems to get quieter on higher levels.  Tried cleaning it several times. 

Can you use a wah and then have another pedal for another thing? Does this even make sense ? Do guitarist even use 2 pedals ever? I am so new to this so just asking about some thoughts I have

I would like the intro guitar sound. Please let me know if you can tell me how to program it.

I would like the intro guitar sound. Please let me know if you can tell me how to program it.

I was just searching a couple websites for the Code 100W combo amp and it appears to be removed from some websites while one stated that this amp was no longer available.  Did Marshall discontinue this amp?  If so, are they planning on replacing it or just moving forward with the 25W, 50W, and 100W head?  Why was it discontinued?

Question: I currently have a Code50 and want to jump to the code 100 head. I can't decide between the 2x12 and 4x12 cab. 

I've always had smaller combo amps and now want to jump  up to heads and cabs. What difference can i expect between the 50 combo and 100 head. 

Also, 2x12 or 4x12? 

I play mostly thrash metal, but will play blues and country from time to time. I'm looking for more bottom end, and more clarity. 

Also play mostly les pauls, but also have a Wylde Audio and ESP Iron Cross with EMG's. Will also mix in an acoustic/electric for some stuff. 

I am about to purchase a Code 100 Head , all I have is a 4ohm 212 Cab. Is this okay to do. I know offically it is not, but for tube amps I've heard this is fine to do.

I own a Code100 2x12 combo, and after a couple of months of use I am now dealing with some very noticeable fuzz and crackling. It does not matter what volume I am at... 

Things that I have tried...

*Firmware update
*Using a distortion pedal and changing my preamp to clean as well as acoustic.
*Performing a factory reset

As you can imagine I am pretty frustrated... Has anyone else dealt with this issue? If so...what is the solution, please and thank you...