Questions
Showing results 1 to 20 of 100
0

votes

0

answers

11

views

was wondering if the 2 way footswitch can control the inbuilt pedals in the amp instead of making a whole new preset but with the pedals turned on?

also if the 2 way cant can the bigger footswitch?

asked 27 Mar 2024 at 10:36 AM

Hugh Downey bay
0

votes

1

answer

86

views

Morning

 

I am wanting to set my number three pedal on the footswitch of my Code 50 as my tap tempo across all presets. Is this possible, or do I need to do it per preset?

Also - if you can please run me through how to do this.

 

Alun

asked 07 Feb 2024 at 06:54 AM

Alun Davies
0

votes

1

answer

169

views

I have a Marshall Code 50 with the 4 way footswitch. I have learned how to activate the various effects in switch mode, but I haven't found a solid volume adjustment workaround. For instance, if I am playing rhythm and need to go lead, I can activate a switch and go to distortion, but the level isn't adequate to drive the sound to the right volume for a lead guitar. I have tried adjusting the "level", but it won't go over the master level on the preamp volume-wise. Is there a "volume pedal" like solution for this? I am not sure if I can run a volume pedal in sequence with the footswitch, has anyone tried this?

asked 26 Nov 2023 at 04:41 PM

Richard Stackon
0

votes

2

answers

181

views

Hello all

I am using a Code 25 together with a PEDL-91009 footswitch.

I would like to know if is it possible modify the volume using this pedal. I have read this thread:

(?

but it is not running, I am not getting different volume when changing the preset.

Your help is much appreciated ;-)

 

Kind regards,

Antonio R. 

asked 06 Nov 2023 at 03:03 PM

Antonio Romero (1)
0

votes

1

answer

245

views

My footswitch is not working, just random flashing of different led sticks and numbers - no change from the current preset I'm in.
Is there a way to activate a factory reset of the switch?

asked 20 Oct 2023 at 02:00 AM

Alan Wright
1

vote

1

answer

227

views

Dear Marshall team:

I use the Code 25 amplifier, with the Gateway app and the Code series footswitch. The firmware is updated with the latest version available.

For a long time I have been noticing certain problems, mainly:

-The preset settings are changed on their own (sometimes the volume, other times the gain...) They are usually changed to the settings on the control knobs. I load the preset again, and after a while some of the settings are changed again.

-Another problem is that after using a preset for a while, when changing to another it does not change (it stays blocked). It does not respond either by using the pedal or by changing the preset from the app I have to turn off the amp. At first I thought it would be a Bluetooth problem, since I was using the Gateway application, with an iPhone. But now I'm using it with an Android phone and I continue to have the same problems.

Waiting for your comments, receive a cordial greeting.

Eduardo,

asked 24 Sep 2023 at 10:27 PM

Eduardo Rucandio (1)
0

votes

1

answer

237

views

Hi - just recieved a code 50 footswicth, new and out of the box..   Plugged in and no lights, used a ferw different cables but still no sign of life..  Any advice..?

 

asked 11 Jul 2023 at 03:08 PM

Dean Schubert
0

votes

1

answer

243

views

Is the footswitch for the code discontinued?  I try to order it via Thomann but is not even in the list of the available products. 

Thanks

asked 25 Jun 2023 at 06:07 PM

Apostolos Parsalis
0

votes

3

answers

407

views

I have the possibility of buying an used MARSHALL CODE PEDL-91009 FOOTSWITCH for my MARSAHLL CODE 25, and the seller has told me that it does not come with the connection cable to the amplifier, is that really the case? What kind of cable do I have to use to connect the pedal to the mono or stereo jack amplifier?

This pedal has to be powered by a battery or receives electrical power from the connection cable with the amplifier?

asked 18 May 2023 at 11:03 AM

Pere Camps
0

votes

0

answers

358

views

Hi there! 

 
I have recently brought the Marshall Code Footswitch a few weeks ago and everything was going really well with it until today. I got it out today and set everything up ready for some practice and usually when I play I may turn delay etc off or on. But when I wanted to change the effects using the 1,2, and 3 buttons it wasn't doing what it's functioned to do. As if i pressed 1, all modes would be turned on or off but i only wanted the Disortion pedal to be on or off. It's quite hard to put into words but Ive got a video of it so it makes more sense but i can only upload photos on here. Let me know asap if there is anything i can do to fix it.
 
 
Best Wishes,
 
 
Charlie 

edited 05 Apr 2023 at 12:55 PM

asked 16 Mar 2023 at 02:45 PM

Charlie Whittaker
0

votes

1

answer

284

views

Hi all,

I have a brand new Code 50 + Footswitch - got them today.  I have saved 3 of my own presets to Bank A 1 2 3.  No problem. Also assigned the tuner to a switch.  That was all fairly straightforward.  

However, I am unable to assign any other (new) presets to any of the other banks. When I follow the exact same process I used for Bank A - The footswitch just defaults to one of the amps, stock presets (all of which sound nasty).

I've watched the tutorials. At the moment, I have only 3 presets of my making on the switch and no, apparent way, of using any of the other banks.

Am I missing something obvious?

Cheers,

Mike

asked 07 Mar 2023 at 03:25 PM

Mike W (1)
1

vote

2

answers

518

views

In case Marshall decides to do another round of Codes, or for people that want to buy one, here is my bottom line after dealing with this thing for a few years. I had Line 6 experience and wanted a simpler all-in-one modeling combo with a bluetooth app that could do hard rock. The Katana looked like a toy so I bought this.

PROS: Solid construction. Looks great. Good range of amps and effects. Bluetooth app is very good and can tune every parameter. Tones can be downloaded and backed up to/from Marshall site. Amp can sound very good (after a lot of tweaking). The Plexi, American OD, JTM Crunch and Acoustic amps are good. The Guv’nor, Compressor, Chorus, noise gate and all the delays and reverbs are useable. Marshall has done sufficient software updates to correct early issues (bluetooth, tones, bugs). Can be used at bedroom volume with Master on ‘1’. Optional footswitch gives good control. Documentation is good. Updater software on PC works well.

CONS: Other than those mentioned above, all the other amps and effects are bad. This includes the JCM800, JVM and Silver Jubilee. All the cabs are bad. None of the stock patches are usable. You have to make your own. There are user uploaded patches you can try but very few are usable. Learning curve is significant. The amp is too loud. When you turn up from bedroom level to louder, the sounds change and become very boomy which should not happen with a modeling amp. No effects loop. The ‘out’ is a mini USB. Connecting to a computer requires a mini USB to USB or Lightning cable, which is not included. I tried to use the USB to record to Garageband and sound came out but I couldn’t make it sound good. The footswitch also has a learning curve, and like other people I had to have mine replaced. 

ADVICE: Don’t buy it. I bought my Code 50 new from Sweetwater for $299 and now the same version of the amp is $399. If you must have a Code, get the 25 instead. It is cheaper and still absurdly loud. The higher volume available in the 50 is useless because it sounds bad. The extra hundred bucks just gets you painfully loud solid state power amp watts. 

If you do get a Code, upgrade all the firmware immediately. You need to connect to a computer to do this, but first you have to find the cable on Amazon. This is unforgivable.

BOTTOM LINE: I have spent too many hours tweaking the Code. This is what I hated about Line 6. But the Line 6 tones were superior. I never got a good JCM 800 sound out of the Code, after hundreds of hours of work. It’s only “great” amp sim, oddly, is the American OD. Marshall’s own Classic Metal patch uses this, not a “Marshall” sim! The Code is marketed as Marshall technology with amp sims created by Marshall, but it is not. Softube created the software and tones. This is not a Marshall amp. Line 6 Marshall sims are far better.

I have now bought a tube amp. I am keeping the Code because I have mastered it and can practice on it but I would not buy it again, certainly not for $399.

edited 11 Feb 2023 at 01:42 PM

Tom Joyce (1)

asked 11 Feb 2023 at 01:42 PM

Tom Joyce (1)
0

votes

1

answer

311

views

Hello.. Why does "My gateway" not appear when I access it from the PC?

 
Marshall sent:
Do you mean "My gateway" on My Marshall website?
 
I sent:
Exactly!! On the website the "My Marshall" tab that contained all 100 presets no longer appears. Now I can no longer edit and reposition them as I would like.
 
Marshall sent:
Sorry, that feature is no longer available.
Presets are now saved to User Library and can be easily accessed in Gateway app. Any preset then can be stored to any CODE slot. Double tap the preset and ten tap the first "Save" button, then it will show you a screen with the 100 CODE preset slots, where you can select where to store your preset.
The only missing feature might be the ability to re-arrange CODE presets, which we will see what we can do about it.
 
I sent:
I bought a cable specifically to be able to connect my Code 100H to my PC for this feature, and it is now no longer available! I much prefer the drag and drop option as I have had so many issues storing presets to the amp in the correct slot, then programming the footswitch. 
Marshall sent:
Sorry to hear that.
We are working on a feature in Gateway app that allows to re-order CODE presets. Hopefully, that would help you.
 
 
I sent:
Hello... Any updates on the comment above? 

asked 07 Feb 2023 at 07:45 PM

Maicon Luis Azzolini
0

votes

0

answers

345

views

This actually is a cluster of a few questions that are closely related.

To be able to carry adapted presets with you, you need to save them tot 'Device', the second Icon from the left.
However to link a preset to a position on the Footswitch it needs to be saved to the Amp, the most left Icon when saving.

Most of the time I actually want both, have them in my device and also in the Amp, because of the footswitch.
I have nog found an easy way to do that, both on a one by one and a 'all presets' basis. Anybody?

Because you need the presets in the Amp to link to the Footswitch, every now and then I would like to return the Amp to the original Factory presets.
There are clear instruction how to do that, but when I do, I do not get the Original Marshall Code Factory Settings, but basically what is in my 'MyMarshall'.
I seem not to be able to go back to the presets that were in the Code when I first bought it.
Is there a way to do that, or what is the logic behind it?

It is convenient to take my presets to another Code and use mine, but in a gig, they need to be linked to the footswitch.
So how to deal with that?

Thanks for anyones help!
Bram

asked 27 Nov 2022 at 03:29 PM

Bram Flippo (1)
0

votes

1

answer

407

views

i brought a code pedal 91010 for my code 25 amp but its not working as it is given on user manual. When i plug in the pedal it just change work as a turn off & on  effects like  modulation , delay etc 

can someone tell me what is the purpose of that particular pedal, im confuse please help me.  

asked 16 Nov 2022 at 04:35 PM

Debajit Singha
1

vote

0

answers

445

views

my footswitch forgot the presets...can i gig with this thing? i can't have that happen... i set up a1, a2, a3 and b1, b2, b3, now its just flashing?

Or is the the app. screwing it up? 

 

this is looking more complicated than user friendly... 

please help!

nick

asked 13 Oct 2022 at 09:10 PM

NICK DeNora (1)
0

votes

1

answer

961

views

I need the Electric Diagram for the marshall code 50 amp and footswitch, both stopped working and my Electric guy is asking for it to make it work again, we are not founding it ob Internet, thanks!

asked 23 Jun 2022 at 12:45 PM

marlos ramos
0

votes

3

answers

715

views

Hello folks, I have just bought the Marshall Code 100 which I was really excited about having read the description and watched the demo videos. The amp does sound amazing, but yesterday, on the first occasion that I actually tried the amp during a rehearsal, I was shocked to discover that when I step on the provided footswitch to change presets (like activating one with distortion or heavy delay), mid-song, the flow of the sound broke, there was a moment of silence before it switched to the next preset. I've been trying to research this on the Internet, but have only found 2 instances of it being addressed, no one talks about this in review videos or blogs. This baffles me - how is (mostly) everyone ok with this?

This effectively makes it impossible to use the built-in effects of the amp, which is exactly what its main outstanding feature is. Why have 100 presets when you can't switch mid-song? Are guitarists only supposed to use the Code family to select the main sound they want for a certain song, then keep using pedals for changes mid-song? ?

I'm extremely disappointed since the built-in effects were the main reason I went for this amp - I wanted to use this as both an amp and a multi-effect board to some extent. Is there any fix for this? A firmware update may be, or does the separately-sold Code pedal make a difference? 

Seriously considering returning it at this point. Advance thanks for the replies. 

edited 13 Jul 2022 at 05:12 AM

denial wills

asked 20 Jun 2022 at 05:58 AM

denial wills
0

votes

0

answers

542

views

Hello,

I have just bought the Marshall Code 100 which I was really excited about having read the description and watched the demo videos. The amp does sound amazing, but yesterday, on the first occasion that I actually tried the amp during a rehearsal, I was shocked to discover that when I step on the provided footswitch to change presets (like activate one with distortion or heavy delay), mid-song, the flow of the sound broke, there was a moment of silcence before it switched to the next preset. I've been trying to research this on the Internet, but have only found 2 instances of it being addressed, no one talks about this in review videos or blogs. This baffles me - how is (mostly) everyone ok with this?

This effectively makes it impossible to use the built-in effects of the amp, which is exactly what its main outstanding feature is. Why have a 100 presets when you can't switch mid-song? Are guitarists only supposed to use the Code family to select the main sound they want for a certain song, then keep using pedals for changes mid-song?

I'm extremely disappointed, since the built-in effects were the main reason I went for this amp - I wanted to use this as both an amp and a multi-effect board to some extent. Is there any fix for this? A firmware update maybe, or does the separately-sold Code pedal make a difference? 

Seriously considering returning it at this point.

asked 24 Mar 2022 at 08:56 AM

Erik Joó
0

votes

0

answers

560

views

Hi! On Marshall's official website, the description says that the PEDL-91010 pedal has indicator lights. Mine doesn't. I saw that in others they don't have it either. What happens? 

asked 30 Nov 2021 at 01:11 PM

Elvis Helry Carneiro Correia
Showing results 1 to 20 of 100
Loading - please wait...