I am having problems with the new firmware on my code 25 and gateway app on an iPhone.  It used to work fine but now gateway is not connecting to the amp.

Dear Marshall team:

I use the Code 25 amplifier, with the Gateway app and the Code series footswitch. The firmware is updated with the latest version available.

For a long time I have been noticing certain problems, mainly:

-The preset settings are changed on their own (sometimes the volume, other times the gain...) They are usually changed to the settings on the control knobs. I load the preset again, and after a while some of the settings are changed again.

-Another problem is that after using a preset for a while, when changing to another it does not change (it stays blocked). It does not respond either by using the pedal or by changing the preset from the app I have to turn off the amp. At first I thought it would be a Bluetooth problem, since I was using the Gateway application, with an iPhone. But now I'm using it with an Android phone and I continue to have the same problems.

Waiting for your comments, receive a cordial greeting.

Eduardo,

Hello! 

I have a Marshall CODE50 combo, and when i connect it to my iPad via cable, the input and the output works well in applications developed by Apple (like Garage Band), but I can't control of my amplifier settings in Marshall Gateway app. Is there any way to control the combo on the iPad through the cable?

Thank you in advance for your reply.

Hi,

I've just received my Code 25 amp today. It sounds good but I cannot pair it with my iPhone

It appears as "Headphones" in the bluetooth settings. When tapping on it, my iPhone says "Pairing failed "Headphones" is not supported". 

I've tried with 4 different iPhones (all up-to-date) and got 4 times the same trouble

I've successfully updated the firmware of my amp (MCU 1.47 / BT: V3.2) but it did not fix the issue.

Can someone help ??

Thanks !

Hi, I had a marshall code, dsl 1w, 15w and 40w. I liked of 1w, much loud! I sold all and I have been used a app amplitube with iphone and ipad + irig nano amp, but I figure out in the worst way about update versions, It just stops working after the update. A nice day, and you cant play anymore on analogic gear. 

Now Id like a all in gear and the better for me now its the Code 25.  Even without the app I can handle the amp manually. Although, be convenient. 

Whats the current version suportted for code today? My IPAD 9th  is 16.5, IPHONE 7 is 13.  Is it works? 

thanks. 

After selecting a Preset, and after playing a song when I go back to the Gateway app I see a message saying, "Amp Disconnected, Connection with your CODE amp has been lost. Please check your amp and try to connect again." When I select "OK" it reconnects then I can select a preset. This seems like a new"bug" since the Gateway app has been updated to the current version. My iPhone is on a stand close to my CODE 50 the entire time. (about 1 or 2 feet at most).

Please advise. Thanks!

iPhone 13 Pro, iOS 16.4.1

Firmware: 01 Sep 2022 - v1.47

CODE 50

This actually is a cluster of a few questions that are closely related.

To be able to carry adapted presets with you, you need to save them tot 'Device', the second Icon from the left.
However to link a preset to a position on the Footswitch it needs to be saved to the Amp, the most left Icon when saving.

Most of the time I actually want both, have them in my device and also in the Amp, because of the footswitch.
I have nog found an easy way to do that, both on a one by one and a 'all presets' basis. Anybody?

Because you need the presets in the Amp to link to the Footswitch, every now and then I would like to return the Amp to the original Factory presets.
There are clear instruction how to do that, but when I do, I do not get the Original Marshall Code Factory Settings, but basically what is in my 'MyMarshall'.
I seem not to be able to go back to the presets that were in the Code when I first bought it.
Is there a way to do that, or what is the logic behind it?

It is convenient to take my presets to another Code and use mine, but in a gig, they need to be linked to the footswitch.
So how to deal with that?

Thanks for anyones help!
Bram

Quelqu'un pourrait il m'aider s'il vous plaît je n'arrive pas à connecter mon ampli code 50 sur l'application Marshall gateway il me met ce message: CONNECTION REJECTED You may only control amps you are already connected to for audio output.

Je précise je suis sur iPhone 13 dernière version d'iOS.  Le téléphone lui se connecte sans problème à l'ampli je peux joué de la musique mais c'est tout 

j'ai au préalablement supprimer et réinstallé l'application gateway, reset l'ampli, mis à jour le firmware de l'ampli, déconnecté l'ampli du téléphone et oublier l'appareil Bluetooth, essayer sur un autre iPhone (7)... bref je suis perdu du coup je ne peut en aucun cas faire mes préset depuis mon téléphone et c'est frustrant enfin bref si quelqu'un a une solution miracle je suis preneur et merci d'avance 👌💪

I recently updated my 5th gen Ipad to an Ipad Air 4 and can no longer use the Code app. I receive the following  error when opening the app and can do nothing except  close it - "Context3d not available! Possible reasons: Wrong renderMode or missing device support" 

With no app support available, this amp is dead weight in the studio.  

i have removed the app, restarted ipad, reinstalled it, and end up at the same error every time.  Is the Ipad Air 4 supported at all? IOS  version  is 15.4.1

This issue is driving me crazy. My Code 50 used to work with my iphone and ipad, now it refuses to connect and I always get the above message.

I have performed the following:

1. Forgot bluetooth connection on both devices

2. Deleted iphone app and re-installed.

3. Re-paired and tried to connect with same issues,

4. Formed factor preset of amp with no luck.

I know the blueotth connects as I can play music through my amp from phone, I just cannot connect to update any presets.

Any solutions would be greatfully received, am getting so frustrated with this product.

I just bought the code 25, and only had it for a few days.  It was great on my iPad for effects via bluetooth, although after  I updated the firware it wont connect to thre app on my ipad anymore, it plays songs from my itunes app but the Gateway app says Im already connected and nothing works to adjust the affects. Im really bummed about this, any word on why this is happening and how to fix it?. 

Hy folks!!.

I just bought a marshall code 25, and when installing the marshall gateway app on mu iphone 12 (ios 14.8.1), and open app i get the following error: "context3D  not available!  Possible reason: wrongrendermode or missing devicr suport. " and it does not work. What I can do?

Hi there, just purchaced a Code 50, installed the Gateway app for iPad. All working a treat, eccept that if I am connected to the Amp via bluetooth, I am getting all the keypad sounds through the amp, also incoming messages, email notifications and phone calls. is there a way of stopping this????

Hello. I recently bout the CODE 50 and it's great, but the gateway is pretty much useless for me. I have tried pretty much everything and it still will not connect to my iPhone 11 pro max. I have had friends try the app and it works fine on their phone, but when it comes to mine, nothing! Really love the amp and would like the bluetooth to work from my phone so i can adjust with ease. Not the end of the world, but it is advertised that you can control everything from your phone so that's what i would like to do. Any solutions? Thanks.

Update to below- The iPhone 11 IOS 15.02 update fixed my issues. The app is working properly now & I'm very happy.
____________________________________________________I had a fault code & couldn't connect Gateway to my Code 50 a few months ago when I purchased it. I tried deleting the app to reload but when I reloaded, it was only accessible via the App Store & wouldn't appear on my Home Screen. I could connect for awhile. Recently it seems since the IOS 15 update to my phone, it no longer connects manually or automatically to my Code 50. The app is useless to me. I've search for an alternate app from another source that is compatible with the Code 50 but there doesn't appear to be one. The Gateway app and Bluetooth connectivity heavily influenced my purchase decision. If I had known the app was useless and I would have to physically go to the amp and try to dial in each sound, I would have just bought a fender. I really feel you should take my amp back if you can't correct the problem. 

While using the Marshall Gateway App on my iPhone 7 or SE (I'm assuming this happens on other iPhone models as well),  the "Playback" page automatically defaults to "Apple Music" when I want to add tracks to jam to with my Code 50 amplifier. 

My question for Marshall Support is: Can you make the iPhone Gateway App allow selections of tracks from locations other than "Apple Music" on the "Playback" page?

It would be great to be able to select tracks from my other files like "One Drive" or "Files".  Your competitors like the Boss GT-1 and the Spark 40 allow tracks to be added from ANY location when using their jam-along features. Limiting your choice to "Apple Music" really limits the jam-along experience on your app.

Thank you for considering making this useful update to your iPhone app.

I recently picked up a CODE 100 amp and plugged it into my macbook to try to record using GarageBand. The program recognised the amp so I set both input and output to CODE and was not getting any sound, not even the metronome. Eventually after thinking about it I realized that output was set to CODE so I turned up my master volume (had it all the way down because I wanted to hear the laptop not the amp), and all of the sound including the metronome were coming through the amp speakers. Then I figured out that I could get audio out of the laptop by changing the output to Built in output. Now I am having the same issue on the iPad and can't figure it out. I have a Camera adapter that allows me to plug USB into the iPad. When I connect it, the iPad recognizes it and asks if I want to turn monitoring on, I do. All of the sound, previously recorded tracks, metronome all of it come through the amp speakers. I want the monitoring to output to the iPad speakers, but I cannot find the setting to accomplish such a thing. Any Help would be greatly appreciated, thanks.

My new Code 50 Amp won't connect to my iPad. They are paired via Bluetooth, and Gateway detects the amp. When it tries to connect, it perpetually displays 'Connecting........'

What am I missing?

Hey Fellow Marshall Code enthusiast...As most of you are. I like to use all the features of my equipment hence the Marshall gateway. The short is after months of not getting it to connect to my iPhone I thought let me try the Gateway on my iPad Mini 2?? Aha it works...So the iPad is using iOS 12.5.2 and my iPhone uses iOS 14.4.2. I always keep any of my software up to date with rare exceptions..So it seems the problem is with the Gateway and the newer iOS? So maybe the gateway needs to be updated to work with the latest iOS? Hope this helps?

I have successfully saved presets to my iPhone and can play them using the bluetooth pairing.

What is the best way to permanently transfer or sync them from the iPhone to my Code 50 amp?