Questions
Showing results 1 to 20 of 67
0

votes

2

answers

287

views

After I upgraded the firmware to the new version there was some unchosen bluetooth troubeling and now even my power-switch stopped working. 

The new presets took a while to get enjoyable, but once they  make it, they´re fabolous! 

Is there any way to get the power-switch running?

 

 

asked 09 Oct 2023 at 10:24 AM

Sebastian Petermann
0

votes

1

answer

207

views

I want to roll back this new firmware. The first 10 presets are changed and I need back the Plexi and metal stuff. Why did you remove them? Is there any way to offer different firmware?

asked 06 Oct 2023 at 10:35 AM

Sebastian Petermann
1

vote

1

answer

320

views

Thanks to Marshall for the latest firmware (v1.48) update and new presets. The eleven new presets are cool. Thanks again for keeping us Code amp owners in mind. 

Kevin Towns

asked 04 Oct 2023 at 11:45 PM

Kevin Towns (35)
0

votes

3

answers

271

views

Hola

 

I just updated the firmware and gateway. The app stops on android when you are going to change a parameter within the preset that is on the screen.

It didn´t happen before. Could you fix it?

 

Thanks so much

 

asked 27 Sep 2023 at 09:27 AM

Ignacio González (1)
1

vote

1

answer

227

views

Dear Marshall team:

I use the Code 25 amplifier, with the Gateway app and the Code series footswitch. The firmware is updated with the latest version available.

For a long time I have been noticing certain problems, mainly:

-The preset settings are changed on their own (sometimes the volume, other times the gain...) They are usually changed to the settings on the control knobs. I load the preset again, and after a while some of the settings are changed again.

-Another problem is that after using a preset for a while, when changing to another it does not change (it stays blocked). It does not respond either by using the pedal or by changing the preset from the app I have to turn off the amp. At first I thought it would be a Bluetooth problem, since I was using the Gateway application, with an iPhone. But now I'm using it with an Android phone and I continue to have the same problems.

Waiting for your comments, receive a cordial greeting.

Eduardo,

asked 24 Sep 2023 at 10:27 PM

Eduardo Rucandio (1)
0

votes

2

answers

251

views

After selecting a Preset, and after playing a song when I go back to the Gateway app I see a message saying, "Amp Disconnected, Connection with your CODE amp has been lost. Please check your amp and try to connect again." When I select "OK" it reconnects then I can select a preset. This seems like a new"bug" since the Gateway app has been updated to the current version. My iPhone is on a stand close to my CODE 50 the entire time. (about 1 or 2 feet at most).

Please advise. Thanks!

iPhone 13 Pro, iOS 16.4.1

Firmware: 01 Sep 2022 - v1.47

CODE 50

asked 03 May 2023 at 01:10 PM

Mike Lippeth
1

vote

2

answers

518

views

In case Marshall decides to do another round of Codes, or for people that want to buy one, here is my bottom line after dealing with this thing for a few years. I had Line 6 experience and wanted a simpler all-in-one modeling combo with a bluetooth app that could do hard rock. The Katana looked like a toy so I bought this.

PROS: Solid construction. Looks great. Good range of amps and effects. Bluetooth app is very good and can tune every parameter. Tones can be downloaded and backed up to/from Marshall site. Amp can sound very good (after a lot of tweaking). The Plexi, American OD, JTM Crunch and Acoustic amps are good. The Guv’nor, Compressor, Chorus, noise gate and all the delays and reverbs are useable. Marshall has done sufficient software updates to correct early issues (bluetooth, tones, bugs). Can be used at bedroom volume with Master on ‘1’. Optional footswitch gives good control. Documentation is good. Updater software on PC works well.

CONS: Other than those mentioned above, all the other amps and effects are bad. This includes the JCM800, JVM and Silver Jubilee. All the cabs are bad. None of the stock patches are usable. You have to make your own. There are user uploaded patches you can try but very few are usable. Learning curve is significant. The amp is too loud. When you turn up from bedroom level to louder, the sounds change and become very boomy which should not happen with a modeling amp. No effects loop. The ‘out’ is a mini USB. Connecting to a computer requires a mini USB to USB or Lightning cable, which is not included. I tried to use the USB to record to Garageband and sound came out but I couldn’t make it sound good. The footswitch also has a learning curve, and like other people I had to have mine replaced. 

ADVICE: Don’t buy it. I bought my Code 50 new from Sweetwater for $299 and now the same version of the amp is $399. If you must have a Code, get the 25 instead. It is cheaper and still absurdly loud. The higher volume available in the 50 is useless because it sounds bad. The extra hundred bucks just gets you painfully loud solid state power amp watts. 

If you do get a Code, upgrade all the firmware immediately. You need to connect to a computer to do this, but first you have to find the cable on Amazon. This is unforgivable.

BOTTOM LINE: I have spent too many hours tweaking the Code. This is what I hated about Line 6. But the Line 6 tones were superior. I never got a good JCM 800 sound out of the Code, after hundreds of hours of work. It’s only “great” amp sim, oddly, is the American OD. Marshall’s own Classic Metal patch uses this, not a “Marshall” sim! The Code is marketed as Marshall technology with amp sims created by Marshall, but it is not. Softube created the software and tones. This is not a Marshall amp. Line 6 Marshall sims are far better.

I have now bought a tube amp. I am keeping the Code because I have mastered it and can practice on it but I would not buy it again, certainly not for $399.

edited 11 Feb 2023 at 01:42 PM

Tom Joyce (1)

asked 11 Feb 2023 at 01:42 PM

Tom Joyce (1)
0

votes

3

answers

715

views

Hello folks, I have just bought the Marshall Code 100 which I was really excited about having read the description and watched the demo videos. The amp does sound amazing, but yesterday, on the first occasion that I actually tried the amp during a rehearsal, I was shocked to discover that when I step on the provided footswitch to change presets (like activating one with distortion or heavy delay), mid-song, the flow of the sound broke, there was a moment of silence before it switched to the next preset. I've been trying to research this on the Internet, but have only found 2 instances of it being addressed, no one talks about this in review videos or blogs. This baffles me - how is (mostly) everyone ok with this?

This effectively makes it impossible to use the built-in effects of the amp, which is exactly what its main outstanding feature is. Why have 100 presets when you can't switch mid-song? Are guitarists only supposed to use the Code family to select the main sound they want for a certain song, then keep using pedals for changes mid-song? ?

I'm extremely disappointed since the built-in effects were the main reason I went for this amp - I wanted to use this as both an amp and a multi-effect board to some extent. Is there any fix for this? A firmware update may be, or does the separately-sold Code pedal make a difference? 

Seriously considering returning it at this point. Advance thanks for the replies. 

edited 13 Jul 2022 at 05:12 AM

denial wills

asked 20 Jun 2022 at 05:58 AM

denial wills
1

vote

1

answer

640

views

I have several custom presets in my Gateway (via my PC at my.marshall.com). I synchronized my PC with the Gateway App on my Android phone and all the new presets show up (so far, so good). The problem is that when I turn on the Code 100 amp, all of my presets (in the Gateway Library on my phone) get reset to the default presets.

If I turn off the amp and re-sync, all of my custom presets show up again. When I turn on the amp, they all get reset to default values.

I updated the firmware on my CODE 100 and tried several different startup configurations, but nothing works.

Why is the amp overwriting the presets on my Gateway App?

asked 20 Apr 2022 at 04:22 PM

Reid Beck (2)
0

votes

0

answers

542

views

Hello,

I have just bought the Marshall Code 100 which I was really excited about having read the description and watched the demo videos. The amp does sound amazing, but yesterday, on the first occasion that I actually tried the amp during a rehearsal, I was shocked to discover that when I step on the provided footswitch to change presets (like activate one with distortion or heavy delay), mid-song, the flow of the sound broke, there was a moment of silcence before it switched to the next preset. I've been trying to research this on the Internet, but have only found 2 instances of it being addressed, no one talks about this in review videos or blogs. This baffles me - how is (mostly) everyone ok with this?

This effectively makes it impossible to use the built-in effects of the amp, which is exactly what its main outstanding feature is. Why have a 100 presets when you can't switch mid-song? Are guitarists only supposed to use the Code family to select the main sound they want for a certain song, then keep using pedals for changes mid-song?

I'm extremely disappointed, since the built-in effects were the main reason I went for this amp - I wanted to use this as both an amp and a multi-effect board to some extent. Is there any fix for this? A firmware update maybe, or does the separately-sold Code pedal make a difference? 

Seriously considering returning it at this point.

asked 24 Mar 2022 at 08:56 AM

Erik Joó
0

votes

1

answer

602

views

hola, acabo de instalar el firmware actualizado a mi marshall code 100 combo y ahora no suena ningún preset..

asked 18 Feb 2022 at 05:00 PM

ISMAEL PEREZ
0

votes

0

answers

578

views

     hi there , 

 

    Is anyone else having the same issues downloading user presets from Marshall.com ? I have a code 25 and ive already installed the updated firmware , however im still having issues downloading the presents when i'm connected to my computer.

asked 16 Jan 2022 at 09:28 PM

michael bumpus
0

votes

1

answer

705

views

My CODE25 was repaired by Marshall in September after the amp itself kept crashing and the sound was cutting out. It has now been returned in an even worse condition.

On switching it on, the message 'Hold 'Store' to reset' appears on the screen. I press store and nothing happens. I am unable to access the amp presets.

After 10 minutes the mobile app then also freezes. I have contacted my Marshall dealer who sold me the amp and they have asked me to contact you for a resolution before I can send it back to them.

FYI: I have uninstalled and re-installed the mobile app without any resolution of the problem. The amp is is of no use and even a factory reset and firmware update has not solved the problem. I am gradually losing my faith in Marshall CODE products.

Do you have any solutions?

asked 04 Nov 2021 at 02:15 PM

Gerry McIntosh
2

votes

1

answer

870

views

My brand new Code 50 is crashing after saving presets on amp. The firmware is the latest version 1.44. I applied the factory reset and the presets reset but neither were been helpful to fix this issue. After crashing, there is no output sound.

edited 13 Jun 2021 at 01:31 PM

The Persica (2)

asked 12 Jun 2021 at 12:33 AM

The Persica (2)
0

votes

1

answer

674

views

I've had my Code 25 since xmas without issue until a couple of weeks ago when a strange sort of crowd clapping sound started whenever I would use reverb and the delay sounds like an old 8-bit arcade game. This is across all presets and settings. Updated the firmware but no change.  Any suggestions?

asked 05 Jun 2021 at 10:22 AM

Andrew Grant
0

votes

5

answers

756

views

My Code25 over the last few months, has started to suffer from the volume suddently dropping. It doesn't seem to matter what preset I am using, though the main culprits seem to be the Jubilee Gain with the classic 100w power amp setting and 1960 cab. When it occurs, I either have to come out of the preset, try different presets by pressing the various buttons on the PEDL91009, or by turning the amp off and on. This doesn't happen every time I use the amp, but enough to be an issue, especially when out gigging. I am on the latest firmware of 1.44

An example of the problem can clearly be heard on this recording of a recent practice session. It start at full volume, then just drops considerably.

?

Is this a known issue? Is there likely to be a future firmware update which may adress it?

asked 24 May 2021 at 01:00 PM

Colin Heaps
1

vote

4

answers

951

views

I have Marshall CODE50 and PEDL-91010 (2-way switch). I have the latest 1.44 firmware update installed, but my pedal does not work properly. For some reason when I press the switch to go down a preset it goes up a preset or just does nothing. Sometimes it works, but that does not happen very often. I've opened the footswitch and the circuit seems too simple to be faulty and by the way my amp acts when I press the down switch it looks like it is the problem with the firmware. 

asked 03 May 2021 at 06:30 PM

Marko Kralj (1)
0

votes

4

answers

1.6k

views

I recently purchased a CODE25 to use as a practice amp. It looked like something fun I could play around with.

The first few days it was ok as I was only using some of the factory presets. Trouble started as soon as I edited one or saved an online preset. The sound dissappeared (speaker) and the display got very faint. Restarting the amp made the display ok again but still no speaker sound. I reset the presets (hold down Amp while turning it on) and that seemed to do the trick.

But soon after the sound issue started again. I reset the amp presets, re-installed the firmware, but I only had sound for 2-3 seconds after boot, then nothing.

I have now discovered that if I plug in a headphone (which has sound) and then unplug it, I have speaker sound again. This makes me even more confused. I haven't tested long enough to confirm that this will work over time. 

I see that there is a lot of posts regarding sound issues and requests for a long overdue firmware. But have anyone found out any new tricks to overcome the issues?

I sent an email to Servicedesk last week but haven't recieved a response of any kind.

asked 14 Apr 2021 at 11:00 AM

Bjørn Gamlem
0

votes

1

answer

712

views

Hello, . . . im new to guitar and this is the first amp i have bought with my own money.

I have a 100h that says version 1.11 when i turn it on. I am happy with the sound for the most part but wish there were some improvemnts to the software   

Due to marshalls apparent lack of interest in the software, and peoples stories on here of updates making their amp worse, I am afraid of "bricking" my amp if i try to upgrade the firmware so wondering if anyone really noticed much of an improvement from updating the firmware, and if it was even worth it?

My two biggest software issues are:

1.when i connect my phone the amp automatically reverts to the first phone presets so if i am in the middle of playing with a certain preset and my phone decides to dissconnect and reconnect it will change the preset, or if I walk out of the room  . .. ... .which is  really, f8king, annoying.

2.the mute lag when switching between presets,  . . . . seems pretty useless and lame to play live if there is a big silent gap between switching tones

Can anyone confirm if the firmware update fixes either of these? Thx!!!!

edited 26 Mar 2021 at 07:24 PM

Kevin sukh

asked 26 Mar 2021 at 07:03 PM

Kevin sukh
7

votes

1

answer

1.1k

views

Here are a few things I would suggest as improvements to the Marshall Code series. I have a 25 so some things may be specific to that amp. I have stuck to things that could be improved only by software or firmware as these are improvements everyone can have simply by updating the firmware rather than modifying the amp itself.

1. Reduced power mode to switch between full power and lower power mode. This would fix the volume control issue everyone complains about.  Maybe this could be a global setting in the firmware ?

2. USB audio Volume level setting (e.g.  -3dB, 0dB, +3dB etc). This could also be a global setting in the firmware ?

2. Normalise the volumes of the models, some are way too hot (British class A power-amp), some are way too low (Natural pre-amp). I beleive this is the reason why some models have strange low frequency distortion (50s British, OD DSL).

3. Show the configuration of the Cab models, not everyone is a Marshall fanboy and I have no idea what cab a "1960X". even if it was displayed as "1960X (4x12)" I would at least know what the configuration of cab the model is.

4. Fix the spring and hall reverbs, they sound very cheap, like the "echo" you would get on a cheap karaoke machine, certainly nothing like a spring reverb.

5. For god's sake release an official desktop editor!!! with the option to save/restore/edit patches.

6. A sync button to sync the amp presets with your gateway. It you want to rearage the patches online in gateway, you have to manually save all the patches one at a time to the amp using the phone app. So if you add a new patch at position 0, you have to manually save all 100 patches one at a time in order to match your gateway sounds!

 7. Fix the tuner, it is pretty bad on both the amp and the app. It's slow to respond and not very accurate (at least thats what its like on mine). Ive no idea how well it works on the foot controller.

8. If possible add a Fuzz pedal model, even at the expense of removing another model (I wouldnt miss the pretty poor Acoustic simulator for instance).

These are just some suggestions that I feel would make the amp just a little bit better, but in general I'm having a lot of fun with this little amp, and love the sounds and features it has. It is way better sounding than some of the negative reviews online would suggest.

Maybe other people can suggest firmware updates too?

 

edited 22 Mar 2021 at 11:39 AM

Joliet Jake (126)

asked 21 Mar 2021 at 09:37 AM

Joliet Jake (126)
Showing results 1 to 20 of 67
Loading - please wait...