Salve, ho un Stanmore 1 una volta fatto l abbinamento non riproduce il suono cosa può essere? Grazie 

good morning I purchased a marshall code 50, I immediately updated the firmware to version 1.48, I performed all the possible procedures for connecting to the phone, when I press rev and pover it goes into pairing mode and the blue light flashes but no phone that I have tried and sees it in the devices, is there a solution for this problem?

I am struggling to connect my two acton 3 speakers to play as stereo, I bought them because I should be able to connect them together, but I am afraid I will need to return them. I tried everything from the Marshall bluetooth app, Is there any solutions?

Hi Marshall team,

I got my Marshall Monitor II headphones yesterday, but the Marshall App doesn't seem to find, recognize, or connect to them.
Yes, I can see the message that you know about that issue my question is do you have any terms for when it will be fixed?
Because I tried Equalizer from the app on iOS and it's sorely lacking on Android.

Thank you in advance.

My Acton 2 Bluetooth speaker is plugged in and is in discovery mode, however when it is added and paired to my Windows 11 PC, "Battery is 0%" is displayed and audio cannot be played, We've already updated the BIOS and downloaded the latest Bluetooth device drivers for Windows 11 but connection still fails.

Is it possible to transfer presets from my samsung  galaxy s23 to my code 25 via Bluetooth?

Bonjour,

J'ai acquis récemment un ampli Marshall CODE 50

Je souhaite écouter des backtrack via MP3 lorsque je joue.

En  connectant l'ampli en Bluetooth, le niveau du signal MP3 est très faible part rapport à celui de la guitare.

Il y a t-il une façon d'amélioré le son provenant des MP3 ?

Merci par avance de votre retour

Just curious if there is a way to do this without a computer- can you use bluetooth headsets with the CODE 50 as a monitor when you play? In other words, I tried to use my headphones (wireless) to connect to my phone while the app is running, and I can't get any feed from the amp into the buds. Just wondering if there is a way to hear the amp wirelessly with the buds while also simultaneously having the amp speaker still audible.

I have a new CODE 25. It's automatically connecting to my phone with Bluetooth even when I don't want it to. Can anyone tell me how to turn off Bluetooth on the amp so this doesn't happen? Each time I disconnect it keeps reconnecting. Very frustrating. 

After using Minor III  by use wear only one side per time for 2 or 3 days, my phone can't connect to the left side. I decided to unpair then pair again, I can only pair to the phone but can't connect to the in-air and  bluetooth system say "An app is needed to use this device". I also uninstall application then install again but can't fix this problem. How should I do?

Thank you,

View

I want to add my device to the Marshall Bluetooth app.

I keep pressing the button on the case as instructed, but the blue LED doesn't blink. (Nothing just happens.)

Double-click to turn on the orange light and press the button to turn on the green light.  I can't see the blue light blinking... ioi

The device and my phone are paired, so you can listen to music.

But I want use the Marshall Bluetooth app by adding my device.

How can I add my device via bluetooth mode?

My ACTON II has a problem with connection and all LED's are acting weird. Unfortunately when I'm trying to create a ticket for repair there is no SERIAL NUMBER sticker at the back. Can you help me on how to process this?

I just bought the Marshall Code 25 Amplifier. Whenever I plug my guitar (Epiphone Les Paul Custom Replica), sometimes even just the cable into it, it makes a buzzing/ticking/crackle noise - sometimes both at the same time. When I play sound over Bluetooth or nothing is plugged into the "Input", it does not make the noise.

The guitar, plugged into a different amp (Cambridge Audio with Bose Sound System) with a different type of cable (RCA with a 6.3mm adapter at one end), also does not make the noise.

So either the amplifying circuit/chip in the code 25 is fried, or the cable (normal 6.3 on both ends) is.

Worth to note: the Guitar, Amp and the normal 6.3 cable are all brand new.

Do you know what can cause this and how to fix it, if the Amplifier is fried I can just return it within 2 years.

Могу ли я использовать наушники Bluetooth с усилителем Code 50, чтобы играть на гитаре и слушать ее? У меня есть Bluetooth-наушники, но они не работают...

My Emberton II turns on with no sound and it's bluetooth is not discoverable, I tried resetting by pressing for 7 seconds. Still it's not discoverable and can't connect to any devices. 

How can I fix this?

Please help me

Hello, I have problems with my Minor 3 headphones. They are work via bluetooht, but i can't connect it to app. 

When I do it, they disconnect from my phone and I need to delete it from bluetooth devices list and pair it one more time. 

Somebody help me, as I know it's not only my problem.

Please help to know if my recently bought product Marshall Emberton 20 Watt Wireless Bluetooth Portable Speaker(black) is original or not?

MODEL: EMBERTON BLUETOOTH

FCC ID : 2AAGF-EMBERTONB

IC:11153A-EMBERTONB

CAN ICES- 003(B)/NMB-003(B)

EAN-13 : 7340055355537

MODEL NUMBER: 1001908

PLEASE CONFIRM

After I upgraded the firmware to the new version there was some unchosen bluetooth troubeling and now even my power-switch stopped working. 

The new presets took a while to get enjoyable, but once they  make it, they´re fabolous! 

Is there any way to get the power-switch running?

Dear Marshall team:

I use the Code 25 amplifier, with the Gateway app and the Code series footswitch. The firmware is updated with the latest version available.

For a long time I have been noticing certain problems, mainly:

-The preset settings are changed on their own (sometimes the volume, other times the gain...) They are usually changed to the settings on the control knobs. I load the preset again, and after a while some of the settings are changed again.

-Another problem is that after using a preset for a while, when changing to another it does not change (it stays blocked). It does not respond either by using the pedal or by changing the preset from the app I have to turn off the amp. At first I thought it would be a Bluetooth problem, since I was using the Gateway application, with an iPhone. But now I'm using it with an Android phone and I continue to have the same problems.

Waiting for your comments, receive a cordial greeting.

Eduardo,

Is it possible to connect more than 1 device to a Code 100H amp? Either separately (one at a time) or simultaneously?

Thanks.