Questions
Showing results 181 to 200 of 370
0

votes

0

answers

751

views

In desperate need of a preset that will get me close to replicating Pride & Joy by SRV.  The other presets suggested dont seem correct, at least to my ear. 

Any suggestions would be greatly appreciated !!

asked 29 May 2019 at 06:48 PM

Ron DeMartino
0

votes

1

answer

1.1k

views

After a 30 year break, I am back to playing. I own a Code 50 and 4-button Marshall pedal. How difficult is it for me to program a number of presets provided in the amp to my pedal? The A bank came loaded so I will leave that alone. I found 3 presets I want to start with and activate them in bank B. I am pretty sure this sounds like a simple question but you are answering a guy that has his kids help with his phone when there are problems. Rock on!

asked 19 May 2019 at 02:25 PM

Timothy Mather
0

votes

2

answers

922

views

hi everyone, i have a CODE 50 and the biggest complaint i have is finding a preset that allows the amp to be "sensitive" to the controls on my guitars.

you know with any halfway decent tube amp you can ride the volume knob on the guitar to not only turn down (attenuate) the volume but actually change the tone. i know most people use what i call "help me box's" to do this, however, i never use those things. my question is, does anyone know a preset that i can program that will achieve this?

the basic sound would be any Fender or Marshall.

i look forward to anything you all have to say,

thanks,JP

asked 18 May 2019 at 03:39 PM

joey pinter-bilek (1)
0

votes

2

answers

1.3k

views

I am considering the purchase of a Marshall CODE 100 combo 2x12 unit.

The primary use would be for practice,

Do any of the existing 100 presets provide straight through clean sound? 

Is it possible to run this unit  so that there is a close match between input and output with no modification?

 

asked 23 Apr 2019 at 09:22 PM

James R Jacobsen
0

votes

0

answers

1.1k

views

hi .. anyone can help me to create preset "modern high gain" like jeff loomis,keith merrow sound? is it marshall code can do it???? lets share and learn . thx a lot

asked 23 Apr 2019 at 04:11 AM

fajar ainurrofiq
0

votes

1

answer

832

views

I cannot registered preset . Each time i need to do so by switching on editing button no sound on my code 50 and the amp is blocked. Is it a failure or a bad using. Do i have to return my amp and exchange

asked 20 Apr 2019 at 04:58 AM

Patrick GAUDIN
0

votes

1

answer

1.1k

views

I am a beginner and I would like the equalization to sound to audioslave, if possible with the CODE 25. Thanks

asked 08 Apr 2019 at 11:56 PM

HERMES MOISES MALCAMPO
0

votes

1

answer

1k

views

Hello,

A few days ago I bought a Code 25 amp and I really like it but I have some questions about the presets. I connected the amp to my laptop and updated it to the latest firmware and found some presets that I like and want to use on my amp. How do I this? I saved hem go my library but how do I upload them to my amp? Hope to hear from you guys!

Greetings,

Bas

edited 06 Apr 2019 at 04:41 PM

Bas Wolter

asked 06 Apr 2019 at 04:40 PM

Bas Wolter
0

votes

2

answers

1.1k

views

Hi there,

has anybody a good idea how to get "the" George-Lynch-sound, esp. the sound of the Dokken- or Lynch-Mob-era, with a CODE 50 (or has even a preset programmed already)?

Thx, Mark

asked 06 Apr 2019 at 12:33 PM

Mark Lüttger (32)
0

votes

1

answer

904

views

I'm noticing a significant volume difference between the presets I have programmed on the footswitch in A2 & A3, is there a way to adjust this so the volume remains the same when switching between A2 & A3 ? 

asked 05 Apr 2019 at 04:52 PM

Ron DeMartino
0

votes

1

answer

1.2k

views

My CODE 25 connects to my PC via both through MIDI in Chrome and through the Firmware Update Utility but it refuses to do anything but sit there while the gold loading circle just spins and spins. I've left it for upwards of 30 minutes. I'm unable to click on check for updates or anything. Tried rebooting a few times, tried turning blutooth off while doing it, etc. My amps current version according to both the amp and the app is v1.3. Any suggestion on what to try? Should I do some kind of factory reset to the amp and try again?  Any help or suggestions would be appreciated.

As a side note, I'm also unable to "download preset to amp" to test it out even though it's giving me the go ahead to do it on the preset site. I'm sure the issue is connected to being unable to update the firmware.

Thanks!

asked 21 Mar 2019 at 04:15 PM

Brett Ewaschuk
0

votes

1

answer

2k

views

Hi please refer to this previous question to help explain the background to my question:  https://my.marshall.com/forum/question/1479/marshall-code-100---should-it-have-come-with-a-2-way-foot-switch?filterType=recent&myActivity=True

Basically I bought a Marshall code 100 (no it's not 100H or 100C just a plain 100). It was out of its box and on display but discounted by about $180 because it had a slight dent in the base. The store rep claimed it had not been used. I bought it due to the price but after a few months I realised it should have come with a 2 button footswitch. I then raised this fact with the store and they agreed to supply me with the one that should have come with it. It has been about 6 months since they promised me they would replace and every time I ring up they come up with some bullshit excuse like "oh our suppliers on the other side of the country claim it is not sold as a spare and they have to order it in and they are not receiving any new stock of this item until Feb". 

So Feb has come and gone so I am about to ring them and vent my frustrations on them. Then I thought maybe I could get the PEDL 91009 foot switch instead of the PEDL-91010, at a discounted price (perhaps to the value of the cheaper switch that should have come with it), as I am told it is much better.  As I have never had or even used a foot switch and am completely clueless on them I have a few questions:

Does the basic PEDL-91010 footswitch only allow you to switch to the next preset up or down on the preset list of 100 presets? Or can you jump from like preset number 4 to preset number 98? If it only allows you to switch to the next one up or down does the 91009 model allow you to switch between any two presets on my list? Does the 91009 model allow you to program more than 2 presets to switch between when playing a song? 

Finally, one responder to my other post mentioned that the Code 100 only comes with a basic 2 way footswitch and that the PEDL 91010 is an optional extra. But this contradicts what others were saying (eg that it is the PEDL 91010 footswitch that it comes with).

Anyway I am confused and need all this cleared up so I am fully armed when I next call the store.

asked 10 Mar 2019 at 02:04 PM

julien casella (1)
0

votes

0

answers

936

views

Hey, one of my all time favorite riffs is Unchained from Van Halen. I'm trying to get that particular flanger sound on my code 50 but I just can't get it right. I found a few Van Halen presets but those are for other songs. The flanger in the Van Holy preset is too much over the top to my liking. A preset for this song would really be appreciated :-) 

asked 10 Mar 2019 at 01:22 PM

Wim de Nooijer (1)
0

votes

1

answer

999

views

So about a year ago I got a footswitch for my Code 50, and when i first got it, it started banking backwards on it's own. I was able to stop it...until now. The worst part of it, is when i go to use the amp's tuner, it immediately exits because it thinks the button is being pressed. When it began a few days ago, I was able to press the bank button to increase the bank and counteract the issue, but now the bank button stopped working. Maybe I pressed it too hard or too much or something. I cant remember how I fixed it last time or whether or not the bank button worked, but all I know is this time it might be done for good. If anyone knows of this issue or has had it happen to themselves, please let me know how I can fix it. I dont remember all the presets that were saved to it, but I can remember a couple. Please help!!!

asked 08 Mar 2019 at 07:57 PM

Keenan Borgerson (3)
0

votes

2

answers

696

views

Hello, I don't know if this is the place to ask but I'll try anyway.
For my Code50 I really would like to see Presets from guitarists like:

Johnny Marr (The Smiths)
Wayne Hussey (The Sisters Of Mercy / The Mission)
John McGeogh (Siouxsie and the Banshees / PIL)
Chris de Garmo (Queensrÿche)
Geordie (Killing Joke)
Robert Smith (The Cure)
East Bay Ray (Dead Kennedys)

 

edited 07 Mar 2019 at 02:54 PM

Wim de Nooijer (1)

asked 07 Mar 2019 at 11:19 AM

Wim de Nooijer (1)
1

vote

1

answer

1.3k

views

Hello, just purchased a Code 50 and so far I'm very happy with the amp but there are still a few things unclear with the Presets and Gateway. I have connection with my laptop or via android, that all works fine. I've downloaded a few presets from the website and want to use them on the amp. 

- The standard 100 presets are  there when I connect to the amp. If I want to add new presets do I have to override one of the standard presets? I thought 200 was the limit?
- And another thing,  if for example I upload a new preset to the amp the name of the preset doesn't show in the display. 

I tried the manual or Youtube tutorials but none are very clear on this subject. 

 

 

asked 06 Mar 2019 at 09:45 AM

Wim de Nooijer (1)
0

votes

1

answer

872

views

Hi all,

 

Just purchased a CODE 50 and am very pleased with the purchase, great modeling amp. However, I downloaded the Gateway app and any changes I am making on the my.marshall.com website do not seem to be syncing with the app. I added new presets from the user presets section but the change does not show up on my app (old preset I had is still there and not replaced). Also, now I have duplicates of several presets! No idea why. Every preset from 51 on is duplicated so now my list of presets is up to 148. What gives?? How do I correct these issues or are these known issues? 

I am using an iphone8 with iOS 12.1.4

Any help would be much appreciated and let me know if I am doing anything wrong. Thanks.

 

Jared

asked 05 Mar 2019 at 04:43 PM

Jared Wasser
0

votes

1

answer

892

views

hello when i change patches on my code 50 , despite using the same pre amp and power amp im getting a delay on the patch change, approx 2 seconds untill the selected patch actually kicks in. is this down to the DSP chip recalling the set ups? also has anyone tried playing this code with cab sim off.  sounds quite good like my old TSL combo.  not bad at all .

asked 02 Mar 2019 at 08:49 AM

stephen haynes
0

votes

1

answer

710

views

What are the steps to Backup my presets & patches on MyLibrary?

What are the steps to then load my presets to a friends Code 100?

asked 26 Feb 2019 at 04:31 AM

Mike Trzeciak
0

votes

2

answers

1.1k

views

I've owned the new Code 50 for only a few days so I'm still a novice navigating through all the features. I'm just getting into using the My Gateway app from my Iphone and noticed when I'm connected to the amp through Bluetooth and I have the "blue" presets showing on the app which are completely different than the presets I see on the amp when I'm not connected through the Gateway app. So for example when connected through bluetooth I see preset 00 as EL34 Heaven on both my phone and on my amp,  and when I'm not connected through bluetooth preset 00 is JTM Chill. I like the settings on the gateway app much better than what I have for presets when just using the amp without bluetooth. I guess what I'm trying to do is find the easiest way to say replace 00 JTM Chill with 00 EL34 Heaven so I can have 00 EL34 Heaven on the amp without having to connect using the gateway app? I've look at other questions and cant seem to find this answer. Is this the sync function?? Thanks in advance. 

 

asked 24 Feb 2019 at 04:49 AM

Ron DeMartino
Showing results 181 to 200 of 370
Loading - please wait...