Boss is in version 3 of it's Katana amps: 
https://www.boss.info/us/whats_new/press_releases/2018/BOSS-ANNOUNCES-VERSION-3-UPDATE-FOR-THE-KATANA-GUI/

Fender Mustang GT is in version 2:
https://www.fender.com/articles/gear/explore-the-new-amps-effects-and-features-in-the-updated-mustang-gt-2-0

Are there any plans to upgrade the Code to 2. 0 to include additional amps and effects?

hi support

why do not you solve this problem???

my hardware:

Iphone X, iOS 12.1.4

Ipad Pro, iOS 12.1.4

Marshall Code 25, Firmware 1.4.1, date of purchase 12.03.2019

My CODE 25 connects to my PC via both through MIDI in Chrome and through the Firmware Update Utility but it refuses to do anything but sit there while the gold loading circle just spins and spins. I've left it for upwards of 30 minutes. I'm unable to click on check for updates or anything. Tried rebooting a few times, tried turning blutooth off while doing it, etc. My amps current version according to both the amp and the app is v1.3. Any suggestion on what to try? Should I do some kind of factory reset to the amp and try again?  Any help or suggestions would be appreciated.

As a side note, I'm also unable to "download preset to amp" to test it out even though it's giving me the go ahead to do it on the preset site. I'm sure the issue is connected to being unable to update the firmware.

Thanks!

Hi, Marshall team!

Is it possible to add graphic or parametric (or both) EQ in the future firmware update?

When I update my firmware on my Code 100H  I get the 1.41 update but it continues to update backwards to 1.11 and I cannot stop the update at the new 1.41 update..When I turn the amp back on it shows 1.11 not 1.41.  ???

How do I get the new update alone?

Hi I have a CODE 100 half stack (100H + 4x12 cab) AND a CODE 100 2x12 combo, which just arrived today.

I was expecting the two CODE amps to work together on USB, so I can get 2 guitar traces into my Mac in parallel. Unfortunately I'm disappointed to see that Mac will only see ONE CODE at a time. Looks like they both have the same device ID which creates issue on the bus?

Is this an actual bug? If so, please remove this limitation via firmware update because it would definitely make sense to have more than one CODE connected to the computer without needing additional hardware such a sound interface.

Please let me know asap thanks.

I bought the combo yesterday and it's full of bluetooth bugs - looking now at the FORUM my impression is that the support doesn't care about it.

- No automatic bluetooth connection - iPHONE - I am having always to force Iphone to "forget" the AMP and pairing it again... each time...

- MAC IOS , When I try to connect the bluetooth in my MAC, it makes the system crashes, mouse and keyboard stop working... there's no were to get the necessary code to bluetooth connection...

DO WE HAVE PLANS FOR A NEW FIRMWARE TO BE RELEASED SOON ? PLEASE

Actually I'm totaly not interested in bluetooth connection, but of course I understand that it might be an essential prolem for some people...

But there are some other problems I'd like you to find good solution for.

1. Master volume. From 0 to 10% there is almost no sound, over 10% it becomes very loud. 

2. Decreasing sound level with Volume pot results in decreasing USB signal level - not acceptable for players using USB output for recording in DAW software. It would be nice if for clean preamp gain at 2 and volume at 3  give recording level about -6 dB, now it is about -36 dB... 

Best regards, Jacek.

P.S. What is a frequency range of CODE 25 speaker?

No automatic bluetooth connection after firmware update.

Please solve this problem.

Or support firmware rollback!

I have already asked twice about Bluetooth connectivity issues.

https://my.marshall.com/forum/question/1647/how-long-do-i-need-to-wait-for-code25-firmware-with-bluetooth-issue-solved?filterType=recent&myActivity=True

and 

https://my.marshall.com/forum/question/1308/there-is-a-problem-with-the-bluetooth-connection-since-the-firmware-update.?filterType=recent&myActivity=True

I've been asking questions for over 10 months already, and it's been a year since you released the firmware.
I am already anticipating your answers.
Do you plan to update the firmware?

This is really ridiculous. If you do not have any more updates, I hope you will be able to roll back to the previous version of firmware.
Previous versions did not have this problem at all.

please find away to do BT firmware update. just hoping.

1) Bought Code new, when released, USB port was loose and wont connect. Cant do Firmware or recording via USB. How to get service?

got at Guitar Center San Mateo Ca. When first released, hadn't ever really used USB, but realizzed it is messed up, like port is disconnected or broken. USB is wiggles and no connection. 

2) Cant get Gateway to Recognize tye Amp while BT stream audio okay. tried all steps from this site cleared phone and cache, removed and reinstalled, no diifference. Multiple versions of Android. 5 to 8.

Thanks,

James

I am experiencing terrible interference when trying to use my Code 50  via Bluetooth / Gateway (Apple) App while recording on my Mac in Logic Pro X.  I am using a microphone to record the Code 50 and using the Bluetooth Movies series world to change patches.  The clicks/pops/noise/interference is loud enough to interfere with the recording process.  Perhaps a DESKTOP (Apple) Gateway App via Code USB might be a solution for all users experiencing similar issues?   I am running the most current Firmware.  Any current solution to my noise issues? 

Thank you. 

i purshesed marshall code 25 about 8month back, now when i turned on all binking lights are blink and than off... after on no lights are blinked in any presets... reset amp, update firmware... not done anything!! atteched some of pictures!!

I've had my Code amp for a couple of weeks and managed to connect it to my iPhone which is running the latest ios 10.2.1.  I also got it to connect to a brand new Samsung Galaxy Tab A running Android 6.0.1.  The connection didn't always work and sometimes dropped out.  I've updated the Amp to the latest firmware to hopefully cure the connection issues and now my phone and tablet just can't detect the amp at all.  I've tried turning on and off, resetting everything, forgetting the device etc. etc. but it's like the amp just doesn't have Bluetooth.  As no device can see the amp then Gateway just isn't possible to use as it also can't detect a phone or tablet. My devices can see each other but it's like the Amp just doesn't have Bluetooth.  I've also tried searching for it with an Ipad but this also couldn't see the Amp ?  It looks like the Bluetooth has died on the Amp but thought I'd ask if anyone has any ideas of anything to try or otherwise I'll have to take it back to the dealer and either try another one or replace it with a Fender Mustang.  It's a good amp but seems to have to many glitches at the moment looking at the forums.  I'll give it one more go though if anyone has any suggestions to try.  Any ideas anyone ? Many thanks for reading.

I've had my Code25 for less than a year now. In order to use the bluetooth features I have to establish a brand new connection every time. I have to forget the device on my phone then repair. How can I fix this issue? Yes, my firmware and app are up to date. It is very annoying. I should be able to just turn the amp on and pair to it automatically. Without having to go through so much trouble.

Today I tried to play my Marshall code 50 and noticed that there is acutally no sound coming through.
I already changed the cable to make sure that the cable is alright.
I also noticed that there is no Headphone sound and the amp tuner is not working neither. 
The speaker makes the normal light buzzing noise when turned on, so I assume that it is not about the speaker. 

I did a firmware update just now, but I didn't help. 
I really don't know what to do anymore. I barely played the amp and never transported it neither.
Why it is suddenly not working is a mystery to me. 

If you have any advice please let me know. 

I was just wondering if Marshall is working on a new firmware update for the code series amplifiers and if so when could we expect it to be released?