Questions
Showing results 201 to 220 of 3199
0

votes

2

answers

1.8k

views

Hi all!

I want to change the MIDI-Channel from Channel #1 to Channel #16 on my JVM 215c.

Like in the manual described, I switched off the JVM, pressed and hold the MIDI-programm-switch and switched on the JVM. But when I release the MIDI-programm-switch, the LED did not start to flash and the amplifier did not detect any MIDI-message. From now on the amplifier detected no MIDI-message. Also not the MIDI-program-change-commands on Channel #1!

I had to do a factory reset and (of course) all MIDI-Presets were erased and the amplifier works again on MIDI-channel #1!

Do you know, which mistake I made?
Is there any other reset to do?
Is there any chance to solve this problem?

Thank you very much for your help!

Best wishes
Roland

asked 06 Jan 2017 at 03:27 PM

Roland Kost
0

votes

2

answers

1.8k

views

Je n'arrive plus a faire reconnaître mon téléphone dans l'appli gateway Marshall

Le téléphone se connecte via bluetooth mais l'appli ne me donne pas accès au réglage / pas de connection

Je ne plus piloter mon ampli avec le téléphone alors que cela fonctionnait parfaitement auparavant.

J'ai fait une mise a jour de l ampli par USB 

Quelqu'un rencontré le même problème ?

Merci pour votre réponse.

Éric.

asked 11 Nov 2019 at 02:50 PM

JACKOWIAK Eric
1

vote

1

answer

1.8k

views

Hello guys! I recently updated my marshall code 25 firmware to version 1.41. However, when I turn it on it says on the screen "v 1.11" why?

asked 31 Jan 2018 at 10:30 AM

Rodrigo Guantay (1)
0

votes

1

answer

1.8k

views

can i use a bass guitar with the code 50 and what is the best preset?

asked 13 Feb 2019 at 04:43 PM

Dave Davies
5

votes

2

answers

1.8k

views

Hi,
I find my Code 25 amp too loud at practice levels (at least for my apartment) so I have to set the Master Volume between 0.1-0.9 and in that  range the Master Volume varies greatly which makes almost impossible to adjust it at the same value twice.

It will be nice if the Master knob could also be set via software so it can be saved/stored and also displayed in the amp's front panel screen, since it is very common to move the amp from one room to another and accidentally change the Master setting without knowing at what level it was previously set.
Coud be possible to add this option in a future firmware/app update?

Thanks in advance!

asked 04 Jan 2017 at 02:33 PM

Dake Warren (5)
0

votes

1

answer

1.8k

views

 I have a CODE 25 that I’m gonna be using to record. The pitch shifter sounds artificial set to an octave down to simulate a bass. I also have a Digitech GNX4. Can a bass be run through the CODE25, or should I use the GNX4’s Whammy effect to do bass?

asked 19 Apr 2018 at 02:09 PM

william rouse
0

votes

0

answers

1.8k

views

Hi, I have marshall code 25 and in the Pro Tools 10hd interface it does not appear.
Operating system Windows 10. Probe to connect to different USB ports and there is no solution. In the configuration of the control panel, the device is connected.

Greetings and many thanks

Sorry for my english

asked 14 Jan 2017 at 02:38 AM

Nicolas Durelli
0

votes

3

answers

1.8k

views

 

Hi there,

here is a cabinet our lead player appeared with today at our practice room. He bought this in the 70's and has only replaced the cloth on it due to unwanted cat attention! Any idea how I might get the wattage and impedence from the serial number as he intends to run his Victory VX Kraken through it when it arrives! Personally I think it would be like taking an E-Type Jaguar for a spin in a ploughed field!!

Many thanks.

 

edited 23 May 2018 at 09:27 PM

duncan annible

asked 23 May 2018 at 09:20 PM

duncan annible
0

votes

7

answers

1.8k

views

Hi I have purchased a new CODE 50.  I have the latest firmware update but I'm finding the bluetooth is not consistent.  I have it running on the gateway app and then if I move the phone more the 3 feet from the amp the connection is lost.  The same happens if I play spotify through it the range is about the same.  Can this be imporved or do I have a duff model.  My phone is an iphone 5.

asked 21 Dec 2016 at 12:21 PM

Nigel Grimshire (2)
0

votes

1

answer

1.8k

views

Hi all,

On Christmas of 2016 I was bestowed upon the mightiest of gifts. And I have enjoyed every second from that first pairing to yesterday's low battery hum.

I've arrived home from work and went to charge the headphones. To my surprise in the morning when I went to unplug them they weren't showin' off the silver/white light indicating they've charged. I tried to turn them on and they wouldn't. I then went on to again plug them in and the red light indicator showed up that they're charging. I left for work and when I got back the light was off again.

I unplugged them, tried them on and still nada.

Since then I've been trying different USB cables which work just fine on other devices and I got nothing. When I put in the 3,5 jack it plays beautifully, but I kinda need the bluetooth part for work, so I was wondering if anyone ever got that problem.

I've googled and googled and the only conclucion I've come to is that I need to have them repaired from the shop that my wife bought them from for me.

Unfortunately that would mean at least a month without them and I'm trying to discover any other possibilities before turning to that one.

 

Cheers in advance if anyone reads this.

You're my only hope, guys and gals, I guess.

verbst

asked 18 Apr 2018 at 07:49 PM

Štěpán Verbík
0

votes

2

answers

1.8k

views

Hi,  I have spent hours  trying to develop a clean sound and I am beginning to think it's not possible with this amp.  It is way too bright, or high toned...  It's like the guitar's B string is way louder than the other strings..  I have tried 2 stratocasters, and my alvarez acoustic and they all sound horrible.  These guitars sound fine on other amps.  I have even turned off all of the effects and I can still hear that high ringing noise, so it looks like the problem is not something I can adjust away...   Has anyone else experienced this?  Hopefully I am missing something simple, because I love the idea of the amp and interface.

edited 31 Dec 2017 at 06:27 PM

Bud Evans

asked 31 Dec 2017 at 04:12 AM

Bud Evans
0

votes

4

answers

1.8k

views

Hi! As the tile says, does Marshall have any plans to make the CODE EDITOR for Mac as well?

edited 24 Dec 2019 at 02:51 AM

Omar Calero (1)

asked 24 Dec 2019 at 02:50 AM

Omar Calero (1)
0

votes

1

answer

1.8k

views

Hello, I just purchased the CODE 50 amp, and downloaded the Gateway app. I've only had about an hour and a half to play around with it so far. But I was unable to get the tuner in the app to pick up any sound. I have been out of the "scene" for quite some time and may be using it incorectly. Yet I can't find any help or manual for the tuner. Any help would be greatly appreciated.

asked 02 Mar 2017 at 04:32 PM

Brian Bonsall
0

votes

1

answer

1.8k

views

I just purchased a new DSL100H and provided a footswitch that doesn't work. It tries to switch channels but as soon as I lift my foot the channel reverts back.  The model number of the switch is PEDL-90010.  I read in the manual that the switch I should've received is a PEDL-90009.  They both look similar but does anyone know if that makes a difference? Thanks.

asked 12 Feb 2018 at 05:51 AM

Fergie Ferguson
0

votes

1

answer

1.8k

views

Does the low end of this amp get better after the speaker gets broken in. I don't get to do a lot of high volume playing right now so, how can I speed the process if that's even going to help? 

asked 28 Aug 2017 at 11:43 PM

david frizzell
0

votes

2

answers

1.8k

views

where is the seriel number on my dsl40c located?

asked 04 Jan 2017 at 04:15 PM

Rick Hickman
0

votes

1

answer

1.8k

views

The presets list is different on my code 100 head compare with the Marshall gateway  (the first 14 presets)  so is the 100 head different compare to Marshall gateway or the other code amps?  and i tryed to reset the amp  but the presents still different compare  to the gateway.

edited 10 Nov 2017 at 07:15 PM

Jan Stolpe

asked 10 Nov 2017 at 12:08 PM

Jan Stolpe
0

votes

5

answers

1.8k

views

Hi everybody
I just bought a Marshall Stanmore 2 Bluetooth speaker and I want to connect to my phone to play my favorite music. But I do not know exactly where it connects it does not specify the speaker for me. Can anybody help me with this problem.
Thank you very much

edited 10 Nov 2020 at 09:57 AM

Marshall

asked 09 Jun 2020 at 02:47 PM

Destinie Durango
1

vote

1

answer

1.8k

views

Does anyone know how I can get a user's manual for an old AS50R?  I'm not having luck going to the commercial manual website services and I can't find anything on Marshall's own website.  Thanks.

asked 31 Jul 2018 at 11:42 PM

Stephen Frantz (1)
Showing results 201 to 220 of 3199
Loading - please wait...