The amp was not on, nor was it plugged in, so that is good, I'd imagine. Quickly, after the spill, I turned the amp upside down and then proceeded to get the surface liquid off. Should I open it up? Should I simply let it dry next to a heat source?

i would like to thank the person who ansewed a ? for me the plug in for my pc to amp must have been bad or just the wrong plug order one and as he said  i am now connected to my amp thank you very much.              THANK YOU

I am a beginner and I would like the equalization to sound to audioslave, if possible with the CODE 25. Thanks

i have tryed to get my pc to connect to my code50 amp.but it keeps telling me its not connected .need some help thank you

I have a 1936 cab 140 watt, are the speakers Marshall Celestion G12 vintage, the same as, Celestion vintage 30 ? 

I need to chance one. 

Looking for the best way to run a 1922 ext cab rated for 8ohms and use together with the internal 16ohm speaker. Can the speaker outputs be mixed? i.e. 16ohm speaker to the 8ohm output and 8ohm cabinet to the 4ohm ouput to achieve 5.33 load?

Hi, I havent had any problems with my 2 Code100h that i run in stereo in my marshall 1960v cabs, in any way until now, besides the usual dirty pots.  I am trying to save the "in amp" tuner as a patch or an effect on a patch as the instructional video states. I do have the upgraded footswitch.  The only way ive found to acceas the tuner by footpedal is by turning one of the switch mode choices into the tuner, which makes every single patch have the tuner as the switch mode option. Kinda defeats the purpose. Is there any way to set the tuner as a patch by itself or as a switch mode option on just 1 patch and not all of them? 

just bought myself a new amp. Anyone know how to register it online??

Hi, I bought Major II on Amazon and some users complained that the ones that come in are often not original. So I would like to ask you, if on the basis of these photos we can deduce the originality of the product (with a code on the label). Thank you ;)

https://twitter.com/LocoToretto/status/1114819190567985152

Hello,

A few days ago I bought a Code 25 amp and I really like it but I have some questions about the presets. I connected the amp to my laptop and updated it to the latest firmware and found some presets that I like and want to use on my amp. How do I this? I saved hem go my library but how do I upload them to my amp? Hope to hear from you guys!

Greetings,

Bas

How can i  download the firmware utility. Have a look on the informations code errors.

The following properties have been set:
Property: [AdminUser] = true {boolean}
Property: [InstallMode] = HomeSite {string}
Property: [NTProductType] = 1 {int}
Property: [ProcessorArchitecture] = AMD64 {string}
Property: [VersionNT] = 6.1.1 {version}
Running checks for package '.NET Framework 3.5 SP1', phase BuildList
Reading value 'SP' of registry key 'HKLM\Software\Microsoft\NET Framework Setup\NDP\v3.5'
Read integer value 1
Setting value '1 {int}' for property 'DotNet35SP'
The following properties have been set for package '.NET Framework 3.5 SP1':
Property: [DotNet35SP] = 1 {int}
Running checks for command 'DotNetFX35SP1\dotNetFx35setup.exe'
Result of running operator 'ValueGreaterThanEqualTo' on property 'DotNet35SP' and value '1': true
Result of checks for command 'DotNetFX35SP1\dotNetFx35setup.exe' is 'Bypass'
'.NET Framework 3.5 SP1' RunCheck result: No Install Needed
Launching Application.
URLDownloadToCacheFile failed with HRESULT '-2146697208'
Error: An error occurred trying to download 'https://my.marshall.com/downloadfiles/firmware/MarshallFirmwareUpdateUtility.application'.

Might be a dumb question, but I'm trying to learn. I bought a little combo amp DSL40CR. I want to buy a 4x12 cabinet and use it with this amp instead of buying a head. I believe I need a 16ohm cabinet, I was looking at the Marshall mx412ar.  My question is would this cabinet work with amp, and if so, what would be the correct place on the amp to put the audio cable so I don't destroy my amp?

Thanks,

Adam

Hi there,

has anybody a good idea how to get "the" George-Lynch-sound, esp. the sound of the Dokken- or Lynch-Mob-era, with a CODE 50 (or has even a preset programmed already)?

Thx, Mark

Hey everyone,

I'm hoping someone can help me troubleshoot a new piece of gear I purchased. I recently bought a used Marshall DSL40CR that was running fine, but just tonight the High channel stopped working. Low is perfectly fine, but Highstarted having a  heavily muddied sound and now I'm hearing nothing out of it. All tubes are glowing, but I figured I'd seek out some sage advice before taking things apart and potentially making things worse.

Thanks!

my problem is i can not connect to my computer.it just tells me its not connected.please what do i do to fix it .thanks very  po. i tryed your fix no help.

I'm noticing a significant volume difference between the presets I have programmed on the footswitch in A2 & A3, is there a way to adjust this so the volume remains the same when switching between A2 & A3 ? 

Most retail outlets have dropped $150 off each of these two products. I bought the Code 100 Head from Guitar Center for $250(They price match).  
The Code 100 Combo is now $299 which is the same price as the Code 50.

hi went to buy a new dsl40cr recently told by salesman no longer avaible.is this true.. if so will there be a new 2019 dsl 40  availble in near future.thanks