It is quite easy to reorganise presets using the My Gateway webpage, which then syncs to the app. However, I like to keep my presets on the app and amp the same, and it is quite arduous to transfer them all manually, is there any way to transfer all presets from the app to the amp at once?
Yes, I've read the many questions of the same nature on the forum, and performed all the suggested actions. None of them have been successful. I've seen many questions similar to mine, and only a few who have been able to make it work... and of those who did, their solutions didn't work for me.
When I connect my amp to my phone's bluetooth, it will pair for audio with no problems. I can play audio through the amp. When I open Gateway, there is no "red button" prompting me to connect. When I tap on the CODE tab in the menu, it says "Not connected" and when I tap on the green "Scan for apps" button, nothing happens.
It will connect to my Samsung tablet with no issues.
Here are the steps I have tried:
Factory reset on the amp.
Unpair and forget the amp in my phone's bluetooth settings.
Uninstall the app from my phone after clearing the cache and the data.
Update the firmware on the amp (the browser window said I was up to date but I installed the latest firmware anyway.)
What else can I do? I don't want to return the amp because it sounds great, but not having the amp controls on my phone is a deal breaker.
just received my code 25 today in the mail, sounds great. except when I turn it on or connect to BT. when i do either, it makes a horribly loud screech sound that last about a half second. tried resinstalling fw, disconnecting all cables, still the same. can this be fixed or do i need to return it?
Here's a video of the loveliness: https://youtu.be/MW6hgIA0VCI
I am havin issues connecting my CODE 50 with my iPhone via Marshall Gatway app. Bluetooth connection is working and is connected with iPhone, but when I open app, app finds the CODE 50 amp and then it says "Connecting..." and nothing is going on. If I tap on my amp under Amps Detected, gives me this message:
"Connection Rejected - You may only control amps you are already connected to for audio output". Please help.
Having this issue with Code 50 just updated the latest firmware 1.44v
The amp will hangs or store by itself and nothing works after operating for sometime.
Pressing the footswtich or amp buttons nothing works. Have to do a power reset on it.
Any idea what happen to this?
I have a Code 50 and I use the Gateway to play, but it does'nt stay connected. For half an hour of playing, I have to reconnect 4-5 times. Do you know why ?
(The Code is the only Bluetooth connection in my phone).
Thank you !
Does anyone have a preset that is close to CC Deville of Poison?
Hi all. I have a Code 25 which sounds great through headphones using the cab emulation. Without headphones I'm struggling to find a cab that doesn't sound really boxy. If I switch the cab off, it becomes a fuzzy mess and is unusable. Am I missing something or is that just how it is?
Thanks in advance!
My Code 100 amp just dies off in the middle and comes back all of a sudden the volume just fades off for a while and it comes back at will. Even turning off the amp and on does not solve the issue but somehow after a while it becomes normal again. It seems to be some sort of a volume issue... When I crank the master volume knob to full , I hear faint sounds of my guitar. It comes back after a while automatically but then stops again at random.
Just bought a brand new Code 25 amp that was delivered by courier. It sounds great in play but there is a relatively loud constant hum from the speaker from about 5 seconds after switch on. Even with no guitar attached. is this normal?
Also something is rattling inside when I tilt the cabinet side to side. I'm worried it may have been damaged in transit. Maybe these two issues are related?
Anyone have any thoughts or advice. Not sure I can face sending it back to the seller as although I bought it off a .co.uk website it actually shipped from Poland.
On the Gateway app I can playback very little music. I can easily play music with iTunes (Bluetooth) but I am referring to using the playback feature. I have tried to playback 50-60 songs, some of it is purchased but all of it is downloaded. Why do only certain songs work. This is a huge issue for me and one of the main reasons I bought the Code 100H and 212 cabinet.
When playing, randomly my code 50 will lose volume. I can restore the volume to normal levels by stepping on a button on the footswitch but then it will cut back out over and over. How do i fix this? Is there an update i can do? I have swapped the cable for the footswitch and my input. This is incredibly frustrating when trying to get through a rehersal session. Pleaae help!!!!!
Meaning, can I download an interesting user-submitted pre-set to the CODE and then just reset the amp if I don't like it?
Thanks, in advance
I have a CODE 50, and I'm trying to download the presets that I have chosen in my profile, but I can't download them to the Amp, or to the Gateway app . Pls advise how can I do it.
Many thnx in advance!!
When I connect my Code 50 to my PC via USB, it only plays the left audio of music but not the right audio. This problem does not persist when connected via Bluetooth to my phone.
I just bought a 100h, honestly without doing any research, wich is my bad. After learning they can only be used with CODE cabs I was a bit suprised, but whatever, one can never have too many stacks. Unfortunately after spending hours searching every music site I know, and a couple new ones I found, it seems there are literally none to be found. This leaves me with a new toy that I can't play with, rather frustrating to say the least. Any Ideas anyone?? Thanks, John M
I have an amplifier Code 25,
Tried to find any specification of the installed speaker Y1025J - 02.
The main question for me is:
1) Is the Code25 has the full-range (20-20000Hz)frequency speaker or it a guitar speaker (70-7000Hz)?
2) Can I replace the installed speaker with full-range frequencies (20-20 000Hz) speaker or only the option is do the replacement with specific (I meant for the guitars only) guitar speaker?
I see that is 25w 4ohm speaker, but nothing else to find equivalent for upgrade.
My thoughts are about any speakers, becouse the Code is modeling amplifier and probably the amplifier must produced all frequencies becouse of it. That why I am looking about extra spec information of Code processor working with all audio frequencies and send it to speaker or speaker must be specific as a guutar speaker and cut some unneeded frequencies on speaker level.
I have a Marshall Code 50 running MCU version 1.44 and Gateway (Android version 1.5.5) on a Samsung Galaxy S9+ running the latest OS. I can bluetooth pair to the amp and play music, but can not connect to the amp to change my presets from the library. I have reloaded the latest firmware on the amp, deleted and reinstalled the Gateway app, paired and unpaired several times. Nothing seems to work. I even grabbed my old Galaxy S7 Edge phone and that Gateway app on it does the same thing. Does my amp need to be serviced for Bluetooth connectivity?
hi, i got the marshall code 25, it stopped working when i connected it to my laptop right after i updated the firmware, i think there was a problem with the usb cable, now the amp doesn't respond to anything, and no sount comming out of it, i tried to factory reset stiil no responce, when i turn it on, i get on the screen marshall, then B0.6 , M0.0 , D1.1 , then CHK USB, now i was wondering if there is anything i can do to get it to work again just in case if the new usb wont work, please help
I bought a Marshall Code 25 Amo just over 2 years ago. A slight crackling noise began about 4 months ago and has gradually been getting worse.
The amp now sounds like this https://www.youtube.com/watch?v=d8mBySo-xLo and is totally unusable. Ive tried different guitar cables, a different power cable, a different socket (to rule out interference) and separate guitars. It's definitely the amp.
Amazon won't take the device back and cannot repair it.
Any suggestions as to what my next steps should be please? A device like this shouldn't last for only 2 years.