Questions
Showing results 221 to 240 of 3403
0

votes

1

answer

183

views

My code 25 cutts out after maybe just a second but when I connect headphone they work OK. Any ideas?

asked 01 Oct 2021 at 06:29 PM

Steve Bird
0

votes

1

answer

240

views

I bought a DSL1CR as a practice amp recently, sound was cutting out so sent back and bought another replacement DSL1CR from another vendor.  Received the replacement -- same issue, sound cuts out.  Goes from a 4 to a 1-- then back again... round and round we go..  Have done troubleshooting w/ cable & guitar (brand new Fender Telecaster) -- those aren't the issue.  Thoughts?  I hate to return again-- love the sound... with the caveat: when it works;) 

Any one else hearsd of this issue/ how to rectify?  

Thanks! 

DSL

asked 30 Sep 2021 at 04:54 PM

Andrew Griffin
2

votes

1

answer

452

views

Hello, I bought a Marshall CODE 25 yesterday, and so far I love the sound and feel of the amp. But I am having the same issue that alot of people are having, I can connect to the amp via my phone's Bluetooth but the amp will not show up in the Gateway app.

I have tried everything in the FAQ troubleshooting guide, nothing works. I can play music to my amp but that's it. Feels like a problem with the app and not my phone.

Are you reading the forums, Marshall? You need to take a look at your app, seems like it has some compabillity issues, it's working for some people but not everyone. 

I have a Samsung Galaxy S8.

 

Please fix.

edited 28 Sep 2021 at 04:50 AM

Ruben Eriksson (2)

asked 28 Sep 2021 at 04:40 AM

Ruben Eriksson (2)
0

votes

2

answers

405

views

Hi there. There is a very audible metallic ringing coming from what most likely sounds like the tubes when the gain or master volume is turned up to a usable level on any power setting. There is also a high-pitched scratching type buzzing (not 60hz or ground buzz) at higher master volume levels even with the tilt, presence, and treble turned all the way down.  It sounds exactly like the problem user Chris Holtmier asked about in his question on Dec 27, 2018. It is brand new shipped, and I noticed this immediately out of the box just 30 mins ago. I have tried other speakers, guitars, guitar cables, position in the room on the floor and tightened all the screws as well as re-seating the tubes. It's probable that the tubes are microphonic after shipping but because of the way it is built, I cant reach the tubes to do the tap test when its plugged in. Although the response to the previous question in mention was stated as "We have not come across a rattle on the Origin 50 Combo" it seems that this is a recurring problem with a few of them as he was referring to a post on another forum about the same kind of noise on an Origin 5 as well.

I guess my question is, why doesn't this work properly brand new and is there anything besides a re-tube that you can suggest to fix the problem without returning it?  I can post a sound file if needed. I usually re-tube with JJs anyways (which I suspect would fix the problem) but for now its actually cheaper to drive a 6 hour round-trip on a weekday to a GC than a $100 re-tube that possibly still might not fix the issue.

Other than that, I do really like the amp. I can tell that I would really enjoy it without the noise. I enjoy the effects loop, line out, gain boost, the tilt knob, and especially the vintage styling. It reminds me of a bluesbreaker. I dont play anything other than lower-wattage cathode-biased 6L6 or EL34 and I love pushing them to the max.  With a Rat going straight in I had a lot of fun with it before I noticed the noises again. I'm willing to admit its just a random lemon but maybe it's just from UPS handling and tubes being the way they are. I am going to play it side-by-side with the same model and check that theory. If its just the tubes I will def get the same amp again.

edited 28 Sep 2021 at 01:05 AM

Steven Acklin

asked 27 Sep 2021 at 07:10 PM

Steven Acklin
1

vote

0

answers

219

views

Is there any place to request presets?

asked 27 Sep 2021 at 06:34 PM

John Miller (1)
0

votes

1

answer

242

views

What are the best EL34 tubes to use to lower overheating problems in the JTM60 head? And what is the recommended bias voltage setting also.

asked 26 Sep 2021 at 01:42 PM

Doug Taylor
0

votes

0

answers

188

views

Hi y‘all, no question, just a personal update.

Have been playing two Code50s now for about three years (one for home-use and gigging, the other one for rehearsals, one the clone of the other), and haven‘t had any issues with them.
Now decided to upgrade to the Code100 combo, so I also bought two of them (same idea like said above). First impression was „more headroom“ and a bit „kind-of-more-airy“ open sound with the Code100. In comparison the Code50 sounds a bit more „compressed“.

So, gonna keep the 100s and give away the 50s. Looking forward to rocking the world with the new amps. 

asked 26 Sep 2021 at 10:40 AM

Mark Lüttger (31)
0

votes

0

answers

212

views

Salve a tutti ho un Marshall 25 code.Il problema è  che quando sono attivi i preset in sottofondo si sente un fruscio continuo e interferenze più alte del suono della mia guitar.  Come posso risolvere il problema. 

Grazie

asked 26 Sep 2021 at 08:27 AM

Ileano Cesare Franco CAVINATO
0

votes

1

answer

259

views

Hi, all together!

Pressing REV and POWER starts Bluetooth-Pairing - so far no problem. Also, the amp will also connect automatically when my phone is "near" without any problems.

Now my question:  Is there any way to really "turn off" Bluetooth so the amp does not "search" für devices anymore?

Thx in advance!

asked 24 Sep 2021 at 04:11 PM

Mark Lüttger (31)
0

votes

3

answers

288

views

I have/had a Code 50 that was crashing when I saved a preset. I called Marshall support and they arranged for the amp to be collected. They called me a few days later and said they're experiencing the same issue, but they didn't have the part they need so they sent me a brand new one.

However, I've just received the replacement and it has the same issue. The man I spoke to on the phone said it had been tested before they sent it to me so I re-read the manual to check I wasn't doing anything wrong but I'm certain I'm not. 

I've uploaded a video of the issue to youtube here: 

EDIT: Looks like links aren't allowed. It's at youtube dot com/watch?v=HWUFDVkAN2Y

I've posted this message on here, because I first emailed contactus@marshall.com but didn't receive a response. When I phoned the customer services number the man I spoke to arranged collection straight away which was great but I'm not sure how to proceed now that the replacement also has the same issue.

I love the Marshall brand but I'm not confident I won't have the same issue with another replacement. I can't return it to the retailer either because I first purchased it over a year ago.

Any help would be appreciated. Thank you.

edited 23 Sep 2021 at 01:49 PM

Grant James

asked 23 Sep 2021 at 01:47 PM

Grant James
0

votes

2

answers

277

views

hey there everyone,

im kinda new to the looping scene and bought a boss rc 5 looping station for my code 25 but when i plug them in i wont get any sound..

is there something i am doing wrong or is it just not possible to add a loop pedal to the code 25?

btw i dont have any other pedals or the marshall footswitch

hoping someone can help me out!

asked 21 Sep 2021 at 09:39 AM

jesse van der spree
0

votes

0

answers

216

views

My new code 100 downloads presets. But as soon as you shut it off the new preset dissapears. I save it I sync it with the correct cable connected. Every time it fails to work properly. The pre loaded presets are unusable for the most part. Most are strange unusable things or the volume is so low its inaudible in a band setting. I have watched every tutorial i can find. Nothing works. paid 550 bucks for a product i can't use. i will likely never buy marshall again. constant noise in the amp. just a horrible experience. My little mcg whatever it is marshall is better than this thing

edited 20 Sep 2021 at 04:35 PM

Jason Moberly

asked 20 Sep 2021 at 04:33 PM

Jason Moberly
0

votes

1

answer

265

views

I have a Stanmore II 1 day old, prior to this I have had a BOSE for 8 years with no bluetooth problems in house.

This speaker is a huge disappointment, loud crackling periodically, bluetooth constantly cutting off and on. 

Speak to live chat, typical reset device advice, made no difference. In the end they recommend to return for refund-credit.

Never again will I buy a Marshall product, it goes back and I will buy another BOSE.

(04:43:28) Ken: Speaker links, open Spotify or YouTube, both same problem.
(04:44:08) Vincent: Thanks for trying Ken. Does it cut off on and off?
(04:44:25) Ken: Try to play, pause then Bluetooth connected cuts off, reconnects again after 2 seconds, then solid led.
(04:44:48) Ken: No sound, just keeps cutting off again
(04:45:15) Vincent: Understood. May I know where did you purchase the speaker? Is it from our official website?
(04:45:29) Ken: Mediamarkt Vienna
(04:45:44) Ken: An official outlet
(04:46:03) Vincent: In that case, I would suggest returning it to the store for an exchange or refund, as it was a recent purchase.
(04:46:33) Ken: Ok, yes I will do this. Thank you Vincent.
(04:46:49) Vincent: You're most welcome Ken. Good luck and take care!

edited 19 Sep 2021 at 06:45 AM

Kenneth Taylor

asked 19 Sep 2021 at 06:44 AM

Kenneth Taylor
0

votes

0

answers

266

views

i have a marshal code 25, and i have always wondered, what does the exit/store button next to the digital pannel do?

asked 17 Sep 2021 at 06:58 AM

Hukkum khinda
0

votes

1

answer

256

views

Hello.

I'm not sure if I phrased that correctly, apologies.

I've been enjoying the Emberton for 3 months and have recently noticed that whenever I turn the volume up above 50-60% the lows fall behind and are almost not audible. It effectively sounds like I've applied a high pass filter regardless of the mobile device or media App used. This was not initially the case.

Any advice is welcome, seems like a software thing. I've been careful with it.

 

asked 16 Sep 2021 at 12:21 PM

Aleksandar Bahnov
0

votes

1

answer

287

views

A little less than a year ago we have purchased the Stanmore 2 wifi (with Google Assistant).  A stunning beautifull speaker at a relatively high price. At this price one would expect the best quality. 

Pretty much immediately we noticed that when using the speaker on wifi there is a crackling sounds that interupts the music every so often.  At times this crackling sound can be rather loud and disturbing. We contacted marshall customer support on numerrous ocations. 

After our first contact we got given some advice on how to solve the problem. This is what we were told: 

- There may be other appliences near by that are causing the interferance

- Our music source may be running out of energy/power

- Our Wifi may not be strong enough 

- Asked to try resetting the speaker to factory settings. 

After having tried all of the above and moving the speaker all over the house, pluggin out all other appliences and plugging in the music source to the power the problem did not go away. We immediately contacted customer support again. Though they were friendly I found it strange that they actually just gave me the same message again, with no additional solutions. Almost as if my second message (where I explained what we have tried in detail) was not even read. 

After a couple of attempts of getting through to customer support they finally responded with a more realistic solution; Returning the speaker. This is where I really got annoyed. I have explained in my mails that the crackling sound is not constant. In their response about me being able to return the speak for them to see what the problem is they were clear that should they find no problem that the postal costs (and all other additional costs) would be charged to me. Since the crackling sound is not constant, the chance is big that when they test it they may not hear the crackling at that moment and then blame and charge me. 

All in all this is not what I would expect of a comapany with this reputation and price tag. Simply put this problem should not even exist. I have a couple of other speakers at home (Bluetooth, wifi) all working perfectly at a fraction of the price. Non of them have ' interferance issues', power Issues etc. A speaker at this price  of the Stanmore should simply not have these problems to start with. 

I believe Marshall should take responsibility for this problem and admit it is an issue with their speaker and not due to 'circumstances' at my house. There are enough complaints about this issue online to proof that the fault lies with the speaker. 

Marshall please fix the problem and please replace my speaker. 

asked 16 Sep 2021 at 07:53 AM

Quintin Smit
0

votes

2

answers

172

views

And that means I cannot use it - and clues?  thank you

asked 16 Sep 2021 at 03:18 AM

steven chernikeeff
0

votes

1

answer

351

views

I seem to be having the same issues that a lot of people have reported, where I cannot get the Marshall Gateway app to connect to my Code 25. I've only had the amp for about a week and I cannot get the app to see it. ? 

I can connect to the amp via Bluetooth using my phone (Pixel 3a, Android 11) and whilst connected, can use it as a BT speaker to play music from Spotify. However, nothing I do seems to get the app to connect to the amplifier. 

-I've updated the amp to the latest firmware using my laptop/web browser. 
-I've followed all the instructions in the Bluetooth Connectivity Troubleshooter to the letter (CODE - Gateway Bluetooth Connection Troubleshooting - my.marshall.com)

No matter what I do, or what order I install/uninstall/connect, the app will not see the amplifier. Everything works otherwise - I'm able to apply Patches from ? using a USB connection - and the amp sounds great. I'd just like to be able to control it from my phone.

edited 03 Oct 2021 at 01:11 AM

Harleigh Maguire

asked 16 Sep 2021 at 03:16 AM

Harleigh Maguire
0

votes

1

answer

278

views

Hi, anyone can help? my Marshall Stanmore Bluetooth Speaker stop working. The red power light is on but no sound coming out, neither via the Bluetooth connection nor the input 1 and 2 with audio cable. I can still connect the speaker via Bluetooth but there are no sound coming out of the speaker. Any idea what's wrong? Please help!

asked 15 Sep 2021 at 06:26 PM

henri seng
0

votes

0

answers

244

views

I have a Marshall Origin 50c. I was wondering where the sweetspot is for this amp. I have my gain on 6, my bass on 2 my mids on 3 and my treble on 4, tilt is on 6 , presence is on 7 and master is on 2. I use it mostly for clean tone, then use my distortion pedal for the distortion that I need. I am a at home guitar hobbiest, and would like to know where the sweetspot is for this amp.

edited 15 Sep 2021 at 04:26 AM

David Allen

asked 15 Sep 2021 at 04:26 AM

David Allen
Showing results 221 to 240 of 3403
Loading - please wait...