Hi Marshall,

The last firmware update broke the bluetooth autoconnection issue and it has been more than a year and a half and you never updated it. Last firmware update was at Oct 2017, so I made a decision, I posted my Marshall Code 25 on Marketplace so I hope I can get rid of it and get an amp that works properly or at least works as advertised.

I hope you fix the bluetooth issue before you loose more customers. I think I will never buy a Marshall product again.

I too am bugged by the constant high frequency whine coming from my Code 50's power section. It has nothing to do with the preamp or patch, but rather the level of the power amp output. It is rather high frequency and constant, and varies a bit when you move your head. But the problem does exist, and it sounds like some high frequencies are not being fitered well by the Code 50 & 100 power supplies or output section. A number of users have now complained about this problem. I have a solid background in electronics and am not a flake! I'm an LA studio musician and this noise is not good for professional recording. I'm hoping it is something that is easily fixable, because I love the sounds I'm getting from this amp.

I have my buddies Code 50 here and was checking out some really cool patches a couple hours ago. Waiting for him to come over to grab a bunch and the page will not load. It was a pretty cool page to check the sounds and navagate. Anyone know if this happens, or am i just unlucky.

Thsi is NOT a question. More of an eye opener, if you do this.        

     Take your PERSONAL cell phone. Pull up GOOGLE  PLAY. Not this site. The actual Google play store. Pull up Marshall gateway.....READ THE REVIEWS......They say it all......Your app, that you designed, SUCKS....I could understand blaming phones if it was maybe 3 or 4 out of 50 reviews. But, that's not the case here. You have 50 bad reviews (1 star) to every 55-70 reviews.....Not good....If you're not going to fix the app......DISCONTINUE THE CODE LINE!!!!!!!!!!!!!!!!

how do you get the presets others have made into the gateway library cloud saved 100 presets so I can access them on my amp or do i just copy there presets and change one of the ones i have 

I'm using a google pixel 2 and the app is not connecting with the amp although the phone IS already connected to the amp.

I've tried my wife's samsung s9 and it works ok. 

 Edit. Ok, Now It's working. But not only i had to forget the device, I had to do a Bluetooth, Wifi and Mobile reset. And after I reinstalled the app. 

The reset option is located in Settings>System>Advanced

So everyone else having the same problem and still not working after forgetting the amp on Bluetooth settings and reinstalling the app should try this instead.

Can't be more happy with the amp

I hope this can help anyone.

I have, or should I say, HAD a Marshall CODE 50 which after 20 months of service decided to quit following a POWER SUPPLY failure.  I took it to an electrical repairer for diagnosis and found out, through Marshall Australia and UK that the power supply is not replaceable because it has been suspended.  No parts available.  That means I now have an amp that is unfixable and never will be, even with an aftert-market power supply - which, according to Marshall cannot be retro-fitted.  What a fantastic waste of money that exercise was, and I have zero warranty fall-back.  Has anyone else had the same problem?  Kev

Hello, just purchased a Code 50 and so far I'm very happy with the amp but there are still a few things unclear with the Presets and Gateway. I have connection with my laptop or via android, that all works fine. I've downloaded a few presets from the website and want to use them on the amp. 

- The standard 100 presets are  there when I connect to the amp. If I want to add new presets do I have to override one of the standard presets? I thought 200 was the limit?
- And another thing,  if for example I upload a new preset to the amp the name of the preset doesn't show in the display. 

I tried the manual or Youtube tutorials but none are very clear on this subject. 

Hello Group! I am about to receive my new Marshall Origin 50 watt head on Monday (March 5th). I'm excited as hell! I was looking for a 50 watt platform to go through my hand made Tweed 1X12 cab with a EVM12L that I built three years ago. I just had a bad expierience buying a Fender Bandmaster VM with a blown digital effects board. The repair facility could not obtain this part from anywhere. I wound up returning it to Reverb.com and was out all the repair money, two 5 hour round trips and $55 to ship it back. I was really devistated until (by accident) I stumbled onto this Origin series amp. I owned a few Marshalls in my day but this one really caught my eye. My question to you guys is this; normally amps come through with pretty basic tubes. I have no idea what the Origin comes with as far as stock tubes. Being the perfectionist that I am and the gear freak I've always been, I'm already wanting to upgrade the 12AX7's (EC83s) and the EL34s. Any suggestions as to a good upgrade or are the stock tubes pretty good? Thanks guys (and gals)

Does anyone have a good Shadows Hank Marvin preset?  wishing to get that proper sound on Apache.

The app still has problems to link with the amp CODE, when it will be solved approximately?

Twice now I have spent more than an hour reorganizing the default presets into preamp groupings, in the Chrome browser, clicking Save periodically with the checkbox checked to save a backup copy. Each time, Chrome or MyMarshall stopped accepting my clicks on the Save button in the lower right of the browser. Each time I seemed obliged to close the browser window and then navigate back to my presets. Each time I found all the presets reset either to their original order or at least to an order very different from the one I had created by the time Saves stopped being accepted. (I can't be more clear than this because I do not have the default preset order memorized.) Each time, I could not find any backup with my reorganized presets, so I have no idea what the backups are for or how to use them.

Is it possible to sort presets based on the preamp models and save them that way in the CODE50? Is dragging and dropping each preset, one at a time in the browser on the MyMarshall site, the only way to reorder the presets? What and where are the backups and how can we use them?

BTW, changing the preset position in the Gateway app is problematic. When I tried saving preset 15 as preset 1, I ended up with the same preset in positions 1 and 15. The original preset 1 was missing.

1) Bought Code new, when released, USB port was loose and wont connect. Cant do Firmware or recording via USB. How to get service?

got at Guitar Center San Mateo Ca. When first released, hadn't ever really used USB, but realizzed it is messed up, like port is disconnected or broken. USB is wiggles and no connection. 

2) Cant get Gateway to Recognize tye Amp while BT stream audio okay. tried all steps from this site cleared phone and cache, removed and reinstalled, no diifference. Multiple versions of Android. 5 to 8.

Thanks,

James

Hi Everyone,

I have a CODE 50 amp...

1. Connected from PC using AUX cable so YouTube/Songsterr etc plays through amp.

2. USB connection to same PC for recording to Audacity.

When I play (headphones in) Audacity records the guitar perfectly but doesn't acknowledge the PC audio. I can hear both the PC audio & guitar track clearly in my headphones.

Is there any way to fix this?

Thanks!

Hello,

My macbook pro 15” 2017 doesn’t see marshall minor ii bluetooth headphones.

Is it possible to connect it?

I'm using a Origin 50 combo. I find when I crank the master volume and play at higher volumes, I get what sounds like glassy tube rattle. There is also just generally more noise than I would expect. I tried it with a different cabinet. It seems to be worst when using the internal speaker or when the amp is sitting on top of the external cabinet... my assumption is that the physical vibrations due to high volume are causing the tubes to rattle. The rattling is getting passed through the speaker, meaning that it is not just simply a physical rattle, but it is a transferred into the signal.

It sounds similar to some of the problems on the internet with the Class 5 that had rattling. Someone suggested that tube rings would fix it. Any suggestions?

Hello, Marshall forum family.  I just purchased the CODE 100H (head only).  I have a Marshall cabinet with 4x12 MG series, and I hate the sound of this combination! Does anyone have advice for a replacement speaker?

Thank You All

Jon Doty

Lincoln, Nebraska

Tons of spam, millions of spamers, and nobody to take care about this... 

In many cases I'd like to give an advice, but recently 9 of 10 threads are infected with links to total shit and I've got no idea whether this questin is real, or fake...

Like the title says - I'm wondering if its possible / safe to run the Origin 50 head with the DI connected to a recording device and not connected to a traditional speaker load.

Thanks