Hola. Puedo enlazar mi celular xiaomi redmi note 4 con el amplificador code50 y reproducir música desde mi celular. Pero no puedo enlazarlo desde la aplicación porque no me muestra ninguna opción del amplificador cuando voy al menú de la aplicación.
Ya borre el caché y también la instalación nuevamente a la aplicación pero tengo el mismo problema.
I have followed all of your steps and while my Code 100 pairs to my device, when I open the Marshall Gateway it never shows the code connected, nor does it give me the option inside the app to connect. I have uninstalled and unpaired multiple times with the same result.
Hi I have a CODE 100H head/cab and a CODE 100 combo both with the latest firmware re-installed from Marshall and both have this issue, i.e. the amp very oftenn completely freezes when I save a preset.
Steps to reproduce:
- Modify any patch on the front panel
- Save
- 50% of the times the amp seems to freeze. The preset is saved but you can no longer change preset and there is no sound coming out.
The same happens if you modify a patch from the iOS app via bluetooth and then save it from there.
It's REALLY frustrating and I can't believe I didn't find anything on this forum under the "crash on save" keywords. Seeing it happens on both of my CODE units it much be a software bug, I don't think it has anything to do with my units.
Anyone else has seen this problem?
Thanks!
I have an ipad 6th Generation, and I am having trouble getting the gateway app to run.
I download the app, and when I open it I get the following:
Context 3d not available! possible reasons: wrong renderMode or Missing device support.
i have tried deleting and reinstalling the app, but I just get the same message. Tried on my wifes ipad, exactly the same.
The app runs on my iphone 6s with no problems.
please help!
brian
*****UPDATE : PROBLEM SOLVED. OR MORE CORRECTLY, NO PROBLEM TO BEGIN WITH. APPARENTLY THIS IS NORMAL AS ALL OF THE PRESETS HAVE BEEN SAVED TO MY AMP. NO REPLIES NECESSARY. THANKS! ****
Hello all,
I'm a new Code 50 owner and am just getting started. I bought mine used from Guitar Center so I don't have the manual at hand and am running into an issue. I have added a ton of user created presets to my library on the gateway page, and synched them to my android app. When the app is connected to the amp I can see the presets when in gateway mode (blue dials).
Here's the problem I'm having: When I try to save the preset to the amp, I open the preset in the library, click on the arrow to the right, and put an x in the amp box. When I click save however, the amp box unchecks and I'm back where I started.
I'm not sure if this is a glitch or I'm missing a step somewhere. Can anyone help me out?
Thanks much!
Mitch
Hi all,
I write small desktop app for CODE25.
Everything working except uploading whole preset into CODE.
This is sysex message which i sending into Amplifier to change active preset
sysex data=(0,33,21,127,127,127,114,2,0,68,101,97,116,104,32,83,121,109,98,111,108,105,99,32,50,32,32,0,75,55,20,40,50,1,1,0,25,50,25,1,12,30,0,0,50,50,0,50,0,0,0,0,50,50,50,1,2,35,25,30,20,1,0,75,75,1,7,1,2,3,4) time=0
what is wrong ?
thanks.
hello, sorry for my approximate english, i'm french .. I bought this little amp (code25). rather nice but I see a PB rather boring ..... if I use the quiet amp, in "standalone" mode without launching the app .... I am looking for a preset with the wheel, I play and hack the settings .... I finally my sound, cool , so I launch the gateway app to have a view of all parameters and can simply record ... and patrata, by launching the app, the amp starts on the preset number 1 and I lose all my settings from my preset precede ... rather boring. there is a solution so we can launch the app (after launching the amp, we do not necessarily launch the app all the time) without having a change of preset? thank you
Hi my problem is the Marshall gateway app not connecting Bluetooth to my amp I've paired successfully to my iPad but it only sometime connects to the amp does not connect automatically very frustrating I've deleted app several time still the same problems do you have a update to help regards Rob
Has anyone any settings for Rory Gallagher or Derek Trucks Slide?
Je n'arrive plus a faire reconnaître mon téléphone dans l'appli gateway Marshall
Le téléphone se connecte via bluetooth mais l'appli ne me donne pas accès au réglage / pas de connection
Je ne plus piloter mon ampli avec le téléphone alors que cela fonctionnait parfaitement auparavant.
J'ai fait une mise a jour de l ampli par USB
Quelqu'un rencontré le même problème ?
Merci pour votre réponse.
Éric.
I was having difficulty syncing my gateway app to my Marshall.com to add downloaded presets to my library. On the forums Marshal suggested doing a factory reset by holding the amp button down while restarting the amp.
I did that. Now when I try to Bluetooth connect the gateway app and the amp I get this an error that says "connection rejected. You may only control amps you are already connected to for audio output".
I have restarted the amp and phone but I keep getting the same error message.
please advise on both this current problem as well as how to sync my gateway so that the downloaded presets get added to my gateway library.
Hi,
I have a Nokia 6.1 running latest Android 9. Downloaded and installed app on sd card and it does not even start up, just a black screen.
Is the app not compatible with this phone and anroid version?
Can CODE 50 sync user presets by iPhone app ?
I know the way by mac(chrome).
I have recently had my iphone 8 software updated to ios 13.1.2 and since then have not been able to control my Code 25 amp via Gateway from my phone even though, in iphone settings, I am connected via bluetooth but within the Gateway App I'm not. I have upgraded my Gateway App to version 1.5 back in July and up to now it's worked perfectly well. Is anyone else having this problem and if so is there an App upgrade?
Here's the solution to pairing an iphone/ipad to CODE as of latest apple update. Stop blaming Marshall and learn to work your Apple device!!! Too many whiners complaining about problems that have everything to do with dumb Appple users!
1. settings>gateway app (find in list of apps)>turn on Bluetooth & other options you prefer
2. settings>bluetooth (make sure bluetooth is on), then pair CODE with device following the regular pairing instructions
3. APOLOGIZE to every person you bitched to and learn to work your amp and phone like a capable musician and not the babboon that you are!
Fired up the Gateway app after upgrading my ipad to iPadOS 13.1.2 and I get a message "Context3d not available! Possible reasons: wrong renderMode or missing device support". Nothing happens after that. I have an ipad 6th generation.
This app is terrible ...cannot pair
Hi,
My Code 25 cannot communicate with my phone via Marshall Gateway. The software cannot find and connect to the amplifier as if there was no bluetooth connectivity, but there is as I can listening to music via that. I use Galaxy A5 android.
Could you help me to solve the problem?
Thanks
Adam
To make the most of my CODE50, this web site, and the iOS Gateway app, it is my understanding that I need to connect the CODE50 via a mini-USB cable, connect to the CODE50 in the bluetooth settings of my iPhone, and also connect to the CODE50 in the Gateway app on my iPhone.
When I take all the above steps, I can do everything I want, but I also hear unwanted system bells and whistles from my MacBook Pro and/or my iPhone. Can I do something to get/retain all the CODE50 functionality without the macOS/iOS system sounds? How exactly?
Hello, I have a code 100H and using Windows 10 on the P.C.. Can I download my personal presets to the gateway library for safekeeping? If so, how. Thank you.