I wasn't able to find any Sum41 patches for my  Marshall Code 50 at the marshallcode.tools  website. I tried recreat the  sound by myself but I couldn't. I would appreaciate if someone could help me with the settings like  gain, bass , treble ,effects  etc .  

Thanks in advance.

I've tried every type usb cable i got. Could someone please tell me what type of cable i need. I'd like to hook it up to my computer.

Hi,

I have two Marshall Stanmore Multiroom speakers and I keep having issues with streaming music. I've contacted support multiple times and while they are friendly and try to help as best as they can, I still don't have a solution.

The setup is the following: my two Stanmore Multiroom speakers are in the same room, about 6 meters apart from each other. I have saved a couple of online radio stations and spotify playlists on the devices. The wireless router (a Fritzbox with 2.4GHz and 5GHz enabled) is in the same room, 2 meter from the first Stanmore, 4 meters from the other. 

The problem: When streaming music, half the time it's crackling. By crackling I mean the sound similiar to someone touching the needle of a record player. This is very annoying and not something you want with a speaker you paid €450 for... Now, as both these speakers have this problem, I thought my network was not sufficient. Speedtests (while the crackling is occurring) show I get about 200Mbps down and 30Mbps up. I even bought the Fritzbox to place in the same room to try and solve this problem. 

On the 5GHz network, both speakers only have a signal strength of 25%-45%. On the 2.4GHz network, both speakers get 55%-60%. The crackling occurs on both networks. There is no other wifi network in my surroundings using the same channel, this can be checked on the Fritzbox. This seems to be a very low signal strength while the router is in the same room, with no blocking walls...

The online streams and spotify lists don't have any issues when I listen to them on my phone/laptop, only on the Stanmores.

The last thing support said was to send the speakers to repairs, but I have read the instructions and when they don't find an issue, I need to pay for their work. I would like to make sure I have two faulty speakers before I would return these. Are there any solutions I haven't tried yet? The thing that worries me is that these Stanmore Multirooms are no longer in production... Is this a known problem?

I hope someone can help me with this frustrating issue... Thanks in advance! 

Hi all!

I want to change the MIDI-Channel from Channel #1 to Channel #16 on my JVM 215c.

Like in the manual described, I switched off the JVM, pressed and hold the MIDI-programm-switch and switched on the JVM. But when I release the MIDI-programm-switch, the LED did not start to flash and the amplifier did not detect any MIDI-message. From now on the amplifier detected no MIDI-message. Also not the MIDI-program-change-commands on Channel #1!

I had to do a factory reset and (of course) all MIDI-Presets were erased and the amplifier works again on MIDI-channel #1!

Do you know, which mistake I made?
Is there any other reset to do?
Is there any chance to solve this problem?

Thank you very much for your help!

Best wishes
Roland

I'm experiencing unwanted noise when connecting my Code25 via USB to my iMac.  I've tried several different USB cables and I'm using GarageBand, making sure to turn off all plugins and no other applications are running. I've seen mention of the same issue on other forums. I've created an audio file with a sample of the unwanted noise. https://soundcloud.com/victor-futura/marshall-code25-usb-noise

Is this a known issue, if so, can it be corrected in a future firmware update?

Hey,

So I bought a 2nd hand Marshall Stanmore speaker. Speaker itself works fine over BT but the Source button doesn't work so can't switch from BT to input 1/2/optical. The button clicks and feedback as it should but no function. 

I wouldn't mind if it was stuck on input 1 as that how I'll use it.

Any ideas on how to solve?

Thanks

Hello, just purchased this amp, play almost everyday and love it. When I first got it (playing for hours) I noticed there was a crackling/scratchy... almost like a loose connection sound from the amp, I played around with the cord and it didnt happen again until tonight, about 2 months later. This time it didnt just go away so here are my observations:

I was on full power, maybe 2 on volum, on the clean channle with gain. It seemed fine on e, B, G but on D is where it happened, didnt matter what fret and it seemed to do it on the A and E as well but not as much, I switched channels it did the same, I went into standby and switched cables, same thing, I plugged the guitar in another amp and the issue did not happen, I plugged the guitar back in to the marshal, the crackle was still there. I turned the amp off, put it in half power, turned it back on and no crackle. I turned the amp off, did a few things around the house. came back, put the amp back to 40W, turn it on and it is fine.

Thinking it happens if it gets warm? I have never had a tube amp... so im not sure what signs to look for with regards to a tube going bad... I'm not sure if originally leaving it at 40W and restarting it if it would have been fine. I will try and recreate and see what happens. Any thoughts?

UPDATING:

The foot switch made no difference. I'll move it to another room tonight. I have included a recording if anyone wants to hear it. In the recording you here the noise, I hit the B string 3rd fret... and it goes away, i then hit the D string 12 fret and you hear it come back.

https://drive.google.com/file/d/0B0GN6N50JSBpbTdwZUFWYVVTOU1TMFdfODdFRmdSQkxEcjNB/view?usp=sharing

Mi Code 25 ha dejado de funcionar con mi PC para grabar. Cuando lo conecto por USB ya no lo detecta (error 43 ) interface no reconocido. No se porque ahora no lo reconoce. 

Hay alguna forma de solucionar? 

Hello! 

I recently found out that my code 25 doesn't have a output that supports a jack. I've used a "Gibson Memory cable" before, and that was ok for my use. So my question is; which program should use when I connect my code amp to my computer? I'm not looking for an expensive and supergood program, just a program that works for my hobby playing :-) I hope this was understandable :-)

Hi. The serial number on thei Model 8412 LEAD 4 x 12 is: 9849. Just curious as to when and where it was manufactured?

Thank you,

Tim

I have a Marshall DSL 100-watt head purchased in 2016 (so not the newest version), whose channel switching and onboard reverb I would like to operate with a Fractal Audio FX8's relay function. The manual for the FX8 clearly states that its relay function is only to be used on amps with "short-to-sleeve" switching. My questions are, is the Marshall DSL100 head built with short-to-sleeve channel switching? And also, do the channel switching and reverb on/off functions on the amp behave in a latching manner (i.e. the effect remains on as long as the switch is engaged) or an auto-off manner (i.e. the effect is triggered by a momentary connection)?

Thank you!

hi, i just got a code 50 and i need it to record with. i want to use the headphone as a line out into my interface (roland quad-capture). my question is should i use a UNbalanced jack into the interface or can i use the balanced (stereo).

because right now using a 1/8" jack out of the amp and a 1/8 to 1/4" adaptor sounds really bad out of the monitors. can someone please help me with this.

thanks

Hi all

I’ve recently purchased a code 50 and I’m fairly happy with it but not 100%. 

I do have a issue with the delicate volume control, which has been raised by a few people on here - but I can live with that.

My main problem is some notes sound real muffled when I kick in any thing over a clean present. I seem to be loosing clarity on a distorted chord especially the low end and even more so around the 12th fret. This is made even worse when using the bridge pickup. 

So a power chord on the 12 sounds ok when picked but as a chord, by the strike of the D string there’s hardly anything there.

I’ve tried the speaker and headphones but all feel the same. I playing a Gibson SG straight in with no other effects. 

Does any one have any suggestions? 

I’ll try and put up some recording, as I don’t have any other guitars or amps to compare against. 

My DSL40C amp is less than a year old and the speaker cuts out at moderate volume levels. The amp was purchased in the Los Angeles area at Guitar Center Inc., an authorized dealer, but they are not a Marshall authorized repair center. How do I go about arranging for a warranty repair on my Mashall DSL40C in the Los Angeles area?

Jacob

hi went to buy a new dsl40cr recently told by salesman no longer avaible.is this true.. if so will there be a new 2019 dsl 40  availble in near future.thanks 

Dear  Marshall and user

I got dsl1cr today

If i want to record or practice with headphone without speaker sound

Is it possible disconnect speaker cable?

Is there internal dummy load in dsl1cr?

I really do not understand...should be the easiest thing to do...but it isn't....please help

I have a few questions:

1. A DSL40CR or 100H has 5 output jacks 1x16, 1x8, 2x16, 1x4, 2x8.

Which output do you connect a 4x12 or 4x10 cab?

 A friend has a 4x10 cab with 4 Fender V1030 30w 8 ohms speakers. I believe it comes from a Fender Hot Rod Deville. But I have researched and couldnt find an extension cab like this for a Hot Rod Deville online. It doent have a Fender logo plate on it or an info sticker on the back. It must be a clone someone built. Nevertheless it was built good. I opened the back and I didnt check how it was wired. 

2. Can you run both speakers together, (4x12 or 2x12 cab with the 1x12 V type speaker it comes with?

3. And if so which outputs are the correct ones to connect.   

Someone place help me I dont want fry my amp.

I've been recording on garageband and other softwares for a long time already!

However, I've bought this (crappy) amp to record via USB on these DVAs I'm used to work with. SO, aparently, after questioning people who uses the same amp, and here on the forum, NOBODY could explain the real reason why this "amp" won't work for recording via usb!

The TWO computers I use (macbook and PC - windows7) reconize the amp, however NO SOUND AT ALL are recorded! 

I am familiar with LINE 6 products and I use them a lot. No problem at all with this gear! But MARSHALL, the most famous brand of amps on the world, releases an amp promising to do something they aparently are not able to!

Lame amp! recently bought and, hopefully, recently SOLD! Waste of my time and money!