Questions
Showing results 261 to 280 of 3879
0

votes

1

answer

241

views

How can I reinstall all the 100 factory presets (and overwrite all my selfmade presets) ???

asked 10 Apr 2023 at 07:46 AM

Frank Zimmermann
0

votes

2

answers

266

views

I recently purchased a Code 25 and uploaded some presets to it. When I first select the preset it sounds great, but if I go to another one for a little bit and cycle back, the sound is completely different. What could cause this? The only thing I'll change when playing is the master volume. It typically gets very boxy with a lot of bass and lose mid/treble sound. I have to turn it off then on to get it back.

asked 09 Apr 2023 at 11:23 PM

Cody Burns
0

votes

2

answers

504

views

Hi,

A few months ago (Oct 2022), i buy in Reverb a Marshall Valvestate Bi Chorus 8280 and when i turn on, all feels ok, but one day i note only work one speaker. I change the cables and the other speaker are fine and i think the problem was in the output jack.

Finally, i found a tech who tell me he can check it and repair. When the amp is ready to go, i pay and check it in their local store and i notice a weak sound, but i thinked it was the room. The L and R speakers out works now but the problem comes when i push the chorus and the volume rise and have more body.

The guy tell me is because the amp only works in stereo when chorus is on (great sound and body), and in mono (sound lack and low volumen) when put off, but i don't believe it and that's why I'm looking for an answer here.

P.D. When i receive the amp, the first thing i do, is change the valve, so this is not the problem. If i disconected one speaker (L or R), sounds good and the chorus doesn´t affect the tone.

Please help me.

asked 08 Apr 2023 at 12:53 AM

Jorge Rodriguez
0

votes

1

answer

238

views

Hi Everyone,

I bought a Marshall Studio Vintage Head in US where we have 110V voltage and 60Hz frequency. If I want to use that amp in Italy, where the voltage is 220V and 50Hz frequency, is it okay if I only change the currently mounted (US-rated) fuse? Or do I need to get a transformer? I am not sure if the amp is only rated for 110V / 60Hz...I like to think that it was built for a range of V and Hz that works for Italy / Europe as well, being made in UK.

If the fuse is the only mod I have to do, then I can just use a campatible power cord to plug it in?

Forgive my ignorance, and thanks in advance.

Antonello

asked 07 Apr 2023 at 10:50 PM

Antonello Simonetti
0

votes

0

answers

203

views

how to add a GRAMS preset?

asked 06 Apr 2023 at 03:02 AM

sachin ghodke
0

votes

0

answers

250

views

After many many many failed attempts to update firmware it finally showed successful on the update page but now the screen permanently shows do not switch off or usb not connected and is unusable, no buttons work ,completely frozen.

 

asked 01 Apr 2023 at 10:11 AM

Paul Swords
0

votes

1

answer

249

views

I just purchased a 1999 JCM2000 DSL 50 in mint condition .  It worked for an hour great no issues.

Turned everything off and came back later to find the following:

Channel led lights do not light.

Pedals in the effects loop have no effect.  Just had a Fortin Zuul in the loop.

Cannot change the channel with footswitch nor the front panel channel button. 

I do get good signal out of the cab but am stuck on the lead channel.  

All the tone stack controls work fine.

I can change between lead 1 and lead 2. 

I have pulled the chassis and inspected fuses and all seem good. 

Nothing looks burnt on the boards nor did I find any loose connections.

I removed all connections so only the cab was connected and have same issue. 

Any suggestions before I take it? 

I thought the effects loop would have still worked being I get signal out of the cab. 

Very confused as I have never seen something like this before. 

asked 31 Mar 2023 at 11:06 AM

Mike Schreiber
0

votes

1

answer

201

views

My Marshall AMP not working. Please help :-)

Hello,

I own a Marshall JVM 215c. I purchased this when I was living in Portsmouth. I didn't have much of a chance to use it as I was also studying for a degree at the time. I then moved up North. So 7 years later I'm in a position to crack back on with guitar (finally).

So I dust off my JVM 215c. Turn it on. Nothing happens. There is sorta a thump sound when I turn the power on. But then nothing.

Does this sound like a valve issue? And if so, is it easy to fix myself? Or does this amp need a professional to look at it?

Kind Regards,

Lee

 

asked 31 Mar 2023 at 07:49 AM

Lee Taylor
1

vote

1

answer

282

views

I have a Apple laptop with chrome installed.Tryed to install the latest firmware but it goes to 100% and sticks.The new amp is now useless .Please could you help.

edited 29 Mar 2023 at 08:01 PM

Keith Brough (2)

asked 29 Mar 2023 at 06:35 PM

Keith Brough (2)
0

votes

1

answer

259

views

My Marshal-Emberton bluetooth speaker is having issue with sound. Speaker's conneted and charging, but unable to hear any sound.

 

asked 28 Mar 2023 at 09:02 AM

Leona Nunes
0

votes

0

answers

200

views

Wanting to swap out the g12m for a g12h. Speaker is stuck to the mounting board. Best way to pop it loose. Is it glued?

asked 20 Mar 2023 at 01:06 AM

Chris Klaczynsky
0

votes

0

answers

358

views

Hi there! 

 
I have recently brought the Marshall Code Footswitch a few weeks ago and everything was going really well with it until today. I got it out today and set everything up ready for some practice and usually when I play I may turn delay etc off or on. But when I wanted to change the effects using the 1,2, and 3 buttons it wasn't doing what it's functioned to do. As if i pressed 1, all modes would be turned on or off but i only wanted the Disortion pedal to be on or off. It's quite hard to put into words but Ive got a video of it so it makes more sense but i can only upload photos on here. Let me know asap if there is anything i can do to fix it.
 
 
Best Wishes,
 
 
Charlie 

edited 05 Apr 2023 at 12:55 PM

asked 16 Mar 2023 at 02:45 PM

Charlie Whittaker
0

votes

1

answer

226

views

Can you please tell me which amps the PEDL-91003 is compatible with. I have heard it can be used with the DSL100H Is this the case?

asked 15 Mar 2023 at 05:22 PM

TONY STIRTON
0

votes

3

answers

244

views

What footswitch should I use when Pedl-10010 (P803) are discontinued.

Regards,

TC

asked 15 Mar 2023 at 01:51 PM

Torbjörn Carlsson
0

votes

1

answer

225

views

Why when logged on i cannot see answers to questions ?

asked 15 Mar 2023 at 03:35 AM

Karl Thelning (1)
0

votes

1

answer

289

views

I just bought this amp yesterday. Everything works, but the speakers have been changed to Ovation Audient 40 #9732 8ohms. Should I keep them or go tothe original Celestions?

 

asked 09 Mar 2023 at 01:23 PM

Jerry Brown
0

votes

2

answers

309

views

my code 25 is frozen, nothing is working. The display shows marshall - MCU: 1,47

Connection to the pc is working, update is starting, and then please wait restarting code.

Nothing more. The code 25 is not restarting. Power off and on is not the solution

What can I do?

asked 07 Mar 2023 at 08:10 PM

Kay S
0

votes

1

answer

284

views

Hi all,

I have a brand new Code 50 + Footswitch - got them today.  I have saved 3 of my own presets to Bank A 1 2 3.  No problem. Also assigned the tuner to a switch.  That was all fairly straightforward.  

However, I am unable to assign any other (new) presets to any of the other banks. When I follow the exact same process I used for Bank A - The footswitch just defaults to one of the amps, stock presets (all of which sound nasty).

I've watched the tutorials. At the moment, I have only 3 presets of my making on the switch and no, apparent way, of using any of the other banks.

Am I missing something obvious?

Cheers,

Mike

asked 07 Mar 2023 at 03:25 PM

Mike W (1)
0

votes

0

answers

213

views

Can/should you write directly on the white strips above each switch on the PEDL-91016 6 button foot switch?

 

asked 06 Mar 2023 at 08:35 PM

Keith Trudeau
0

votes

5

answers

294

views

Comprei o Marshall Code 50 e sem nenhum motivo ele fica mudo quando está em uso.

O visor continua aceso, as funcionalidades todas funcionam, mas o som não sai.

Para voltar ao normal, é necessário reiniciar o aparelho, mas o problema volta a ocorrer logo em seguida.

Se eu utilizo ele com fone o problema não ocorre, se eu plugo o fone e tiro, o problema desaparece como se tivesse reiniciado, mas logo volta a ocorrer.

 

Gostaria de saber como proceder.

asked 06 Mar 2023 at 02:06 PM

Marcos Saura
Showing results 261 to 280 of 3879
Loading - please wait...