Hi, is it correct that the light on the ampli related to the effects loop remains always on with the pedal-90012 connected?

Additionally Lights on the pedal do not switch on, is it correct?

 I have a CODE 25 that I’m gonna be using to record. The pitch shifter sounds artificial set to an octave down to simulate a bass. I also have a Digitech GNX4. Can a bass be run through the CODE25, or should I use the GNX4’s Whammy effect to do bass?

When I play music from my phone through the amp with an auxiliary chord, it just sounds muffled compared to my phone speakers or my headphone speakers. Is it the speaker or is there something that has to be done with gateway?

Hi all,

On Christmas of 2016 I was bestowed upon the mightiest of gifts. And I have enjoyed every second from that first pairing to yesterday's low battery hum.

I've arrived home from work and went to charge the headphones. To my surprise in the morning when I went to unplug them they weren't showin' off the silver/white light indicating they've charged. I tried to turn them on and they wouldn't. I then went on to again plug them in and the red light indicator showed up that they're charging. I left for work and when I got back the light was off again.

I unplugged them, tried them on and still nada.

Since then I've been trying different USB cables which work just fine on other devices and I got nothing. When I put in the 3,5 jack it plays beautifully, but I kinda need the bluetooth part for work, so I was wondering if anyone ever got that problem.

I've googled and googled and the only conclucion I've come to is that I need to have them repaired from the shop that my wife bought them from for me.

Unfortunately that would mean at least a month without them and I'm trying to discover any other possibilities before turning to that one.

Cheers in advance if anyone reads this.

You're my only hope, guys and gals, I guess.

verbst

I have purchased new Code 100 (a demo from Sweetwater)  I am not able to connect the amp to my personal device.  When I press the Rev and Power buttons to connect,  the blue lights flash,  the device number shows up on the amp but either of my devices (an I Pad and an I Phone) will not recognize the Code amp.  The Code Amp does not show up in the "My Devices" so it never has the opportunity to pair or show up as connected .   My phone and Iphone recognizes other bluetooth items, ie, head phones, speakers etc. I have tried the FAQ suggestions and have tried the recommended fixes and I am still not able to connect.  

I have not done a firmware update on the Code 100.

Any assistance would be greatly appreciated.

Thank you,

Steve H.

I have a dsl40 c only had it for 3 weeks it has beveloped a problem on low end open E string . With. Single hit of the string it immediately repeats but not in a musical way it is a muddy sound more like a burp or a thud ... has anyone else experience this ? 

Need a Replacement Footswitch for JCM 2000 DSL 100 head from 2003. originally had a 2 button footswitch. What models footswitches will work with it? Thanks

Hello,

How can I program my code 50 so I can switch up/down through all my 100 presets?

I am using a 2 button footswich. Connected to a code 100H it worked fine.

Hi, I have been trying to download the gateway app onto my Sony experia L1 but when I go to the app store it comes up with a message that says gateway is incompatible with my device. Is there a way for me to get gateway on my device? 

Is anybody aware of the timing for the release of the PEDL-91016?

Especially in ch. 2 more the noise is terrible with the least amount of gain and volume.   Speaker cab keeps sounding like you are unplugging under power.  I was excited about getting a new Marshall but so far I am disappointed.  Any help is appreciated.  It's not as bad on green channel but still very noisy the more gain and volume you add.  None of my other amps do this, two Line 6 Spider V 240's and a Fender Champion 100.

After installing and running the windows firmware app in my windows 10 system I'm still unable to update to the 1.41 version for my code amp. The app response

states my code version is up to date. Please advise

Hey Folks,

New here ... how do I get the presets I have stored here on the web site "library" to show up on the "library" I have on my Gateway app?

Thanks in advance

I have a DSL1CR when replacing pre and power valves does the amplifier need biasing, is it self adjusting? And what would be good replacement valves? 

It seems that my phone is connected via Bluetooth,

but on my iphone SE I do not see a connect block on the Gateway

only  a scan for amps block and this does not do anything.

Help

Hi! Just bought the CODE 25 amp and I've put the firmware up to date, everything seems to be ok but when I unplug the USB, the LCD reads "CHK USB". I turn it off then on, try to unplug and replug and still read CHK USB and the amp doesn't work.

Thanks for your answers

How can you try out a new PRESET without overwriting a PREST on CODE 50 or the GATEWAY Library?  jwaldron007@optonline.net

What is the Marshall part number for th optional 6 button foot switch for a DSL100HR? 

Has anyone found a preset or come close to she sells sanctuary by the cult sound. !

New amp, out of the box the classic gain channel is very quiet. Even with it turned all the way up you can talk over it.

Probably about as loud as the red channel with volume at 1.5 or 2.  All the tubes are lit up, the red channel everything

works correctly. Any ideas what to look at, I bought the amp online and dont want to return it and wait another week for

a replacement if it is something simple that I can fix on my own.  (I dont have any replacement tubes on hand to try swapping out)