I just bought a code 50, downloaded the gateway app and tried to connect it to my galaxy note8.  I find that the app connects my note8 to the amp as an audio player (I can play songs in my note8's music library through the amp) but it will not connect the note8 to the amp as an amp controller.  In other words, I can play music through my amp but not control the amp's settings.  Even though the note8's bluetooth settings shows the amp is paired, the app says it's not connected.  I've followed the instructions found in the code 50 users manual as well as the instruction founs in the app itself several times to no avail.  Can you help please?  Thank you.

HI all, 

There is a DSL15 head with MX412 for sale at a good price about an hour away from where I live and I wanted to ask a couple questions before I decide if I wanna go check it out or not. 

Is a 4x12 too much cab for the DSL15? I mean, will it have the same punch? I don't play in a big space so that's why I love the 15/7 switchable watts on the head. Would I be better off with a 2x12 or even a 1x12? I have a Blackheart Handsome Devil combo that has 15/7 watt option and it's great but I want a half stack configuration and, well I just really want a Marshall! 

My second question is about the tubes. I notice the head uses 6V6 power tubes unlike the big guys with EL34s. Is there a big difference? I have a Fender that uses 6V6s and it's great, but I want that Marshall roar. Can the DSL15 get me to close to a good Led Zep classic rock type sound or should I go for something else?

Cheers!

Some how, I was playing with my foot switch and erased all of the presets, leaving me 2 channels, working on clean.  The other 2 channels, od1, and # 4 crunch, do not work.  Can anyone help?

Can I use 2 pedal efects at the same time? Like distortion and pitch shifter at the same time?

I was wondering if anyone has experienced this issue, I bought my CODE 100 brand new back in November and after about a week of having it, the sound began to mute in the middle of my playing for one  to two minutes. Turning the amp off and back on seems to be a temporary fix but the problem still occurs. I have also tried to see if there was a difference in having my CODE connected to the app, and it seems like the amp goes longer with keeping sound while connected to the app but it still mutes ocassionally. I also have the latestest firmware. 

Hello can someone tell me why I have no sound on the cabinet when I plug a headphone on my code? Thanks.

I have an iPad 2. I can connect my Code 50 via the iPad's bluetooth settings. It pairs perfectly fine. But when I try to connect to the amp in the Gateway app, nothing happens. I can't see the amp and can't connect to it. Is there a fix for this?

Hi guys,

This isn't really a question but a solution to your problems connecting the Code to Studio One for USB recording. I got it to work using ASIO4All.

Here is a quick 2 minute video I made showing how: https://www.youtube.com/watch?v=LC1FAeFyRn8&feature=youtu.be

Marshall, feel free to point people here if they need this solution. Presonus just points them back to you.

David

Hi,

I purchased Code 25 recently and it worked fine. I suppose the firmware was 1.11 until after the update through windows software, the amp stopped working. Switched it on, the LED screen just flashed repeatedly and non-stop, the user interface wasn't there, nothing else were there except blinking orgrange screen. I couldn't get it to work.

There was one particular moment I got it on for like 5mins, performed a factory reset. But then it went back to the flashing orgrange led screen.

I'm stuck. What do I need to do?

I brought it home yesterday and hooked it up in the studio, started going through the channels starting at 00, got into the teens before I even found one I could stand. Every single one was way too bright. I turned the treble down on those and they were almost acceptable until I started playing with enthusiasm, then way way too sharp again.

I tried 5 different guitars, all of which sound great with the orange and vox amps I have already in the same studio space, nothing sounded good.

I got into the 30's and was so dissappointed, I was going to take it back - just couldn't deal with it even though the power, range and flexibility was so cool. I finally through a thick sweatshirt over the front (double thickness) and tried again. Everything was fixed.

So my question is can I open it up, put a double layer of material between the speaker and grill so I can stand it and cose it back up without voiding the warranty or do I just have to deal with an amp covered by a hoodie?

I just bought the CODE 50 and like it alot; I also have the GATEWAY APP on my phone.

(FYI: I literally must have 25-30 other Top Notch Amps- MARSHALLS / SOLDANO / HUGHES KETNNER / LINE 6 etc;

But I needed something very small for some of the tiny gigs we do; and I feel the CODE has better "Sounds" than my Fender Mustang GT - was using)

MY QUESTION:

-I just created 15-10 CUSTOM PRESETSon the CODE. They are obviously saved on my CODE 50 AMP ....as Presets 1 -25;

-BUT: HOW DO I ALSO SAVE/STORE THEM  TO MY GATEWWAY IPHONE APP???!! (aka; so I don't "lose' them, in case I want to use on another Code Amp, etc.?)

(Basically I'm afraid if I do it wrong; I'll restore the Factory Presets onto my Amp and all my work will be lost!)

-AND; if I do that; will MY PRESESTS  stay in my "APP"; even when the Amp is turned off and not connected to App?

Please let me know and thanks  (and any other Suggestions or INTEL!)!

Dave Saul

ELECTRIC DUDES - NY

Hi, I want to know if there is any development that will make phones like mine compatible with the Marshall App, it would be a huge disappointment if I cannot get to use the app since my phone is modern and running Android 6. I'm writing this before even having turned on my brand new Code 25. It says your device is not compatible with this version on google play; get this fixed for us people! it's 21 century for Gods sake! thank you.

Hi, I have seen on the forum that the code can be used as a solid state amp if all the amp /preFX / cab etc are turned off. After trying this on my code 25  I found that   the tone knobs ( bass/ treble and mids )  and the gain  don't work so all I can do is adjust the volume. After speaking to a code 50 owner he reported that on the 50 even after turning off all amp/ preFX. etc the tone knobs are functional. 

Regards.

Dear staff,

I have code 100H with 412. I have add presets from browser, I updated the firmware without problems but when I change preset positions on that page (My gateway) and hit save, nothing happens. I use Chrome and MIDI connection works fine.
How can I solve this problem?
Thank you.

Francesco

I know how to slave the two stacks together using the effect send of the primary and into the return of the slave head. How do I properly access and use my effects loop in this situation?

Hi All,

As it was mentioned on this forum connecting additional looper pedal isn't possible in a direct way, bacause there is no FX in and out. 

I'm wondering If anyone has experience in building FX Loop using AUX In and Headphones Out in Marshall CODE 25/50 amp?

Can it work? If so, is this a good option?

Mike

Hi all,

I bought the Marshall Class 5 combo about a year ago, and while I think that the concept is fantastic, the actual product isn't. Unfortunately, I think the stock combo sounds rather terrible. Plugged into my 4x12 cab with Neo Creambacks, the sound is vastly improved, though, so I'm thinking about getting a 1x12 cabinet to go with the combo for smaller rehearsals and gigs. Now, the Neo Creambacks eliminate some of the fizzy, harsh and unpleasant frequencies from the combo at higher volume settings, but I'm hoping to get rid of them completely. I'm currently thinking about one of the following two speakers: the Celestion V-type (this would be my first choice) or the Eminence Governor (which people compare to the V30, but with less of the harshness). In your opinion(s), which one would best achieve the sound I'm looking for?

Best,

Michael

Hello Team,

I just bought the Marshall Code25 and tried to update the Firmware via USB.

I have launched the firmware update from the Chrome Navigator and from Windows firmware application. After update performed, Code25 remains to version 1.11 and firmware indicates my CODE firmware is up to date. 

I have notice during the update than first, the version 1.41 is installed (MCU firmware 1.41) and just after a second update is launched installing the version 1.11 (DSP firmware 1.11)

Is it the regular behavior ?

After the update I still have troubles on bluethooth pairing, even if I read this problem should be solved by the update.

Thanks for your help

Regards

Hi,

I want to change the speaker of my Marshall DSL 40C, but the new speaker is of 8 ohms. In this case I will use just one 8 ohms output?  The 16 ohms output and the other 8 ohms output will be unplugged? 

And about the power (RMS) of the new speaker? The manual of the DSL 40C said that the power is 40w, but the original speaker celestion seventy 80 have 80w... The new speaker can have 80w, 100w, 120w?

THIS IS AN INSULT  AFTER WAITING A LITTLE OVER A YEAR  TO EVEN GET MY DAMN CODE 100 COMBO I can even download the software for using the Gateway app " device RDAY `is not compatible "  so WHAT THE HELL was marshall Amps thinking when they placed teir proprietary software in Google Play store ? THIS IS BS  this is the most F-ED UP PRODUCT ROLLOUT IVE EVER WITNESSED in my lifetime  WHO THE HELL IS GOOGLE TO SAY WHAT OR WHAT ISN'T COMPATIBLE you folks need to do something about this YESTERDAY ...there is NO WAY IN HELL I WAITED THIS LONG TO CONTINUE TO KEEP SUFFERING SUCH HEADACHE SHIT