Hello All,
What cable does someone use to hook up their ipad to a Code 50? it would a lightning to a ???
And why does one need a cable to hook up to the Code? if the Code is synched via blutooth then anyhting on the APP, such as updates or presets, should also be able to get tot he Code via the blutooth and not need a cable. Could this be a glitch on Marshall's end or they just never programmed it into the software to do it. Seems like an oversight, no?
Thanks for any help anyone can give,
Lou
Does anyone know of a good preset that would sound like the song “I’m Alright” by Neil Zaza?
Hi,
I have had my code 25 for about 6 months and for a while now, everytime I connect my phone and edit in the gateway app the preset freezes and I cannot change anything or change the preset. On the phone it says I am changing but there is no actual changes happening. On the little orange screen on the actual amp it stays on that preset even if I twist the knob to change preset but can still play and change volume.
TodayI was getting sick of it and looked up if there are updates for the amp and there are, which I then went and installed the latest firmware update. But now when I turn on the amp it shows that it's on and shows the preset but stays frozen and will not play sound at all. Is the amp done or can it be fixed?
Hello mates! I just bought the awesome Marshall Code 50. I'm just wondering how you can organize your own presets in a specific order (and in what presets should you store them all), so you may have for example your very own organized preset: Rhythm preset - Lead preset - Clean preset - Crunch preset.
That being said, can you move factory presets to other spots to organize them at your convenience too?
Thank you mates!
WM♫
Hi all,
i try to make my code sound like that approximately :
https://youtu.be/xu74LK_p82g
but i don’t release this sound...
if someone can help me... please...
regards
hello, been trying to get a good steely dan 'reelin in the years' tone. Anybody else fancy giving it a shot Or give any tips on getting it. Thanks.
I was wondering if the creator of the KASHMIR preset would be interested in also creating the FLANGER part for KASHMIR using all the current preset settings (amp, cabinet, speaker etc) as a complimentary preset for the turnaround section of the song. I believe, from forums, that a preset will switch better (Marshall CODE footswitch) if the preset has the same amp, speaker and or cabinet setting as it takes away the millisecond delay of switching between amps in a particular preset. Look forward to your answer and or creation of said beasty.
Regards Kev
hi all,
I ve got a helix hx I am trying to use for channel swap on the amp.
For all of the above the following applies:
- JVM footcontroller is disconnection
- JVM midi has been reset: its on MIDI channel 1
Boss ES5 (works)
I can get it working using a Boss ES5: https://www.youtube.com/watch?v=3YI65cgA4XI
Midi cable setup: Boss ES5 (out) > JVM (IN)
Also going from Boss through the helix (midi passthrough works).
Midi cable connection: Boss ES 5 (out) > Helix (IN) > Helix (out) > JVM
However, this is using Midi patch panel change. Not sure how this differs from MIDI CC?
Helix HX (not working)
For Helix im following this video : https://youtu.be/simaPS7dzLw?t=55
Midi cable connection: Helix (out) > JVM
Im using MIDI CC and following the table in JSH User manual.
channel : 1
Function: CC: 16
value 2
= clean channel, Orange mode.
I set the amp up so that the midi controller is BLINKING and it doesnt stop blinking: its not receiving the signal?
I feel like Im close to getting there.
Any ideas?
Thanks,
Eric
Ok My phone won't let me download the Gateway App. Is there any other way to get into my presets and what not to turn on my Noisegate/threshold?
can anyone share or suggest a preset for Bowie's let's dance nile rodgers rhythm guitar?
Hi,
if i use a clean preset of the marshall code 100H i got issues with crackling sounds. Even after turning it off and on. Its extremly annoying and it destroyes all that i record into my DAW. With this crackling sounds this Device is absolutly useless!! I've also updated to the latest Firmware version but nothing changed!
Please help!
Is there anyway to reset my gateway library or anywhere to see the original preset list of gateway ?
I have a Marshall Code 50. Not sure what’s happened but when I plug my guitar into it, I get no sound and the presets are now being controlled by the guitar volume knob. If guitar volume is full high, display on the Code quickly scrolls thru presets. If guitar volume is full low, you can individually scroll thru presets by quickly turning volume knob up then quickly back down. No volume from cabinet regardless of preset volume or master volume, only static. Have tried with both electrics I have and both cables, in various configurations with no difference.
Any help is greatly appreciated.
Thanks. Kevin.
Hi There,
Im using a Marshall code 25. I know that you can play the dowloadable presets or use the sample temporarily when you plug your amp to your pc or laptop. But is there a way to do this using a mobile phone?
Kind Regards,
Jericho
Hi everyone.
I have some presets on my library, I added it to my gateway on the website. If I opening application on my phone I see my new presets in library. Problem is starting when I connect my phone with my amp- a new presets disappear ...
Can I / How do I download a preset from MyMarshall to my phone and then from my phone to the amp (Code50)?
Thanks all
Does anyone have a good heavy Robin Trower (like Bridge of sighs stuff early early stuff) and please don't say HENDRIX......thanks D.Wells
Can I save downloaded user presets to my footswitch and how???
Using the Code 50