I really do not understand...should be the easiest thing to do...but it isn't....please help

Hello Marshall Support Team,

I consider buying a Marshall Code 25 or 50, but I'm really concerned about the master volume problem with these amps, which has been discussed in length in this forum (see ? ? ? or ? ) [sorry,  seems the URL-links to the topics are deleted, the topics were "code-25---master-volume-issuses", "code-50-master-volume", "code-master-volume-issue" and "master-volume-marshall-code-50", all about the master volume knob, which goes from very low immediately to very loud].
In one of these threads you seem to acknowledge the problem and state, that your R&D team will look into this.

So here are my questions:
Is this problem solved with newer versions of these amps?
Does the problem show up regularly with all amps or does it affect only some devices?
Is there any chance to replace the Master Volume pot by myself  if the problem shows up after some time?

Thx in advance for you reply.
With regards - snoopy

I've been recording on garageband and other softwares for a long time already!

However, I've bought this (crappy) amp to record via USB on these DVAs I'm used to work with. SO, aparently, after questioning people who uses the same amp, and here on the forum, NOBODY could explain the real reason why this "amp" won't work for recording via usb!

The TWO computers I use (macbook and PC - windows7) reconize the amp, however NO SOUND AT ALL are recorded! 

I am familiar with LINE 6 products and I use them a lot. No problem at all with this gear! But MARSHALL, the most famous brand of amps on the world, releases an amp promising to do something they aparently are not able to!

Lame amp! recently bought and, hopefully, recently SOLD! Waste of my time and money! 

Hi why was the code amp released when it is imposssible to get a 91009 foot swich anywhere also no covers avalible to protect said amp. I am being told up to october on the swich and who knows on the covers. can you help.

Fuzz pedal.  I love my CODE 25, but I'm a bit surprised that a fuzz pedal was not included in the "distortion" section of the pre FX.  I hope Marshall corrects this with the next firmware update.

I know that the Mac version of the firmware updater is coming soon. But how will we know when new firmware updates are released? Only through the desktop software? Or will there be a notice in the iOS app? The website?

Hi everyone,

I getting ready to utilize an old Valvestate VS100 Combo. I need a foot switch that will allow me to utilize the three distinct channels on the amp.

Clean, OD1, and then Lead or OD2. Which switch can I use.

Thanks in advance.

I just wanted to ask why the amp head is in standby mode when the switch is in the off position, rather than the on?  Rather confusing, and seems others have run into this as well but with no real answer. Or is something wired wrong on some heads?  Full playing power comes up with  the standby switch set to on, which seems backwards, so I'm asking what the reason is for this.  Thanks!

I've tried to do this firmware update which is requested on my ACTON II. The problem is when loading firmware into the device, it is a slow process, even after starting over 5 times I cannot finish this update. Error says "We've found an error updating firmware, try again" It's frustrating. Any help will be very appreciated.

My Acton II Bluetooth speaker is connected to my iPhone. Playing internet radio is working fine, but when I try to play Spotify the music stops playing after a second. 

I tried several things, but problem persists. 

Can you help me out? 

Regards, Judith

Hi!

I have a Marshall 1936 2x12 cabinet, but I am unsure how to correctly use the input jacks (8 ohm/16ohm).

Could you please send/post a PDF of the user manual?

Thank you so much!

I use a marshall code25, which I have bought recently for home playing. The problem is , when the guitar is plugged in and the amp switched on I get a lot of buzzing noise. No noise when played.

I have checked the grounding and cables everything, but the noise does not seem to go away

can someone help with some troubleshooting?

.

Hi - never having used a DI out before, being reasonably new to home recording and not wanting blow up a newly purchased SC20H, the question is - can I just run an instrument cable (or speaker cable ?) from the DI Out on the back of my SC20H straight into the Mic/Instrument inputs of my audio interface (Presonus Aidiobox  USB) ? I dont have a cab for the head yet and want to start using it this way until I get a cab. Thanks in advance.

Hi, I have a queation about the Marshall Studio series of tube amps (Sorry it not CODE related)

i have all 3 amps in that serie, the SV20H Plexi, SC20H JCM800 and 2525c Jubilre

I would like to know more about the fx loop, is it line or intrument level ;

+4 (line/active current) fx loop

or

-10 (instrument/passive current) fx loop

it's not indicated anywhere in the user manual

I just want to know if I can use a regular stomp box delay and reverb in the loop or it's made to be used with rack effect.

Thanks in advance! 

Hi

I have a code 25. I just bought a new laptop. it had windows 10 but decided it wanted windows 11 so updated it, now my code 25 is paired but if I connect it. It says connected for a few seconds and then goes back to connect. So I can listen to my online lessons through my headphones. Anyone else experience something similar.

Thanks

Hi all,

On Christmas of 2016 I was bestowed upon the mightiest of gifts. And I have enjoyed every second from that first pairing to yesterday's low battery hum.

I've arrived home from work and went to charge the headphones. To my surprise in the morning when I went to unplug them they weren't showin' off the silver/white light indicating they've charged. I tried to turn them on and they wouldn't. I then went on to again plug them in and the red light indicator showed up that they're charging. I left for work and when I got back the light was off again.

I unplugged them, tried them on and still nada.

Since then I've been trying different USB cables which work just fine on other devices and I got nothing. When I put in the 3,5 jack it plays beautifully, but I kinda need the bluetooth part for work, so I was wondering if anyone ever got that problem.

I've googled and googled and the only conclucion I've come to is that I need to have them repaired from the shop that my wife bought them from for me.

Unfortunately that would mean at least a month without them and I'm trying to discover any other possibilities before turning to that one.

Cheers in advance if anyone reads this.

You're my only hope, guys and gals, I guess.

verbst

I have the Marshall gateway app, a multieffects pedal, a interface Focusrite and a accustom guitar but I can’ get any sound out of the speaker! Help!!

Hello, i have a lot of problems for connecting with the CODE 25 via a Samsung smartphone, a while ago it worked fine. But the last couple of days the bluetooth is killing me.

So i already tried what i read on this forum,

Re install Gateway, delete the Code 25 from the bluetooth and try again.  When i put bleutooth on , i see the device on my smartphone, but it don't want to connect and on the screen of the CODE it says Bleutooth : VO............

It always say: Error, can not communicate with CODE VO.............

Can somebody help my please?