Hi,

I am happy owner of CODE 25 for almost half of the year. 

I love to play with it but I have frustrating problem with connecting Gateway app to it.  Bluetooth connection works fine immediately after switching on the amp my iphone is connected, no problem, but then Gateway application connection to CODE drops after while.  Then I need to go through connecting  all over again, this I switch of Bluetooth on my phone and after swithing it on again and relaunching Gateway I'm connected to CODE. Unfortunately after few minutes the connection breaks again. And at all time my Iphone is connected properly via Bluetooth to the amp! So I'm reconnecting again and again and again...Quite annoying.

Any kind of advice for remediation of such issue is mych appreciated.

Regards,

Krzysztof

Hi Guys,

Does anyone know of a place to get guitar backing tracks -like Karaoke doesn't have the voice tracks, I'd like it without the lead guitar.

Thanks in advance.

I really do not understand...should be the easiest thing to do...but it isn't....please help

I connected my Code 50 to my laptop via bluetooth, but the my.marshall presets says "CODE not connected". I tried connecting via USB, but the amp has a goofy connector that standard USB cables do not connect to. Also - I can connect via the Gateway app on my phone, but the presets I add to My Library do not show up (even though it says that they have synced). 

Hi,

I am a great fan of Stanmore. Just Love the sound ( balanced for all kinds of music and the best when compared to speakers of this kind) but I have seen lots of negative reviews of Stanmore not working after a year or so and week bluetooth on Amazon and Apple users.

I want to buy this system but troubled with bad reviews. Have you identified the issue and how do Marshall resolve it on speakers dying down after the warranty expires.

I am in Bangalore, India and would want the system to work at least 4 years to be a value for money.

Regards,

Deepak Raj

9916248880

Hey,

Just got a Marshall Stanmore, and when listening to calmer songs, I can hear a significant amount of distortion. Like a fuzzy overdrive.
Overall, the speaker sounds great, especially on higher volume, but I still can't get over the annoying distortion. Really low-key piano songs are virtually unbearable to listen to. 

Has anyone else had this problem?

Hi, I have marshall code 25 and in the Pro Tools 10hd interface it does not appear.
Operating system Windows 10. Probe to connect to different USB ports and there is no solution. In the configuration of the control panel, the device is connected.

Greetings and many thanks

Sorry for my english

I just purchased a new DSL100H and provided a footswitch that doesn't work. It tries to switch channels but as soon as I lift my foot the channel reverts back.  The model number of the switch is PEDL-90010.  I read in the manual that the switch I should've received is a PEDL-90009.  They both look similar but does anyone know if that makes a difference? Thanks.

Where can I find a manual for the DSL40CR amp? It looks like everything here is for the CODE amps. The print on the "manual" (a single sheet) that came with the amp is so small it's unreadable even with a magnifying glass.

Hello,

is there a solution for a better adjusting the Master Volume of the Code 50 . Actually i turn the Master Volume to 1, if i turn it up to 1.4 it's too loud. I don't want to adjust the PreAmp Volume, cause it will change the tone. I want to adjust the overall sound with the Master Volume and keep all the tone settings, no matter if i play at home or with the band. I also read the article "CODE 50 Master Volume Issue " from 26.Oct.2016. Is there a solution in the meantime?

Regards
Wolfgang

I recently bought a marshall code 50 and I am really dissapointed. Any tips for making it sound better? I have spend ages on it trying to get a good high gain tone but it just sounds 'boxy'. Any help would be greatly appreciated.

Hi all,

On Christmas of 2016 I was bestowed upon the mightiest of gifts. And I have enjoyed every second from that first pairing to yesterday's low battery hum.

I've arrived home from work and went to charge the headphones. To my surprise in the morning when I went to unplug them they weren't showin' off the silver/white light indicating they've charged. I tried to turn them on and they wouldn't. I then went on to again plug them in and the red light indicator showed up that they're charging. I left for work and when I got back the light was off again.

I unplugged them, tried them on and still nada.

Since then I've been trying different USB cables which work just fine on other devices and I got nothing. When I put in the 3,5 jack it plays beautifully, but I kinda need the bluetooth part for work, so I was wondering if anyone ever got that problem.

I've googled and googled and the only conclucion I've come to is that I need to have them repaired from the shop that my wife bought them from for me.

Unfortunately that would mean at least a month without them and I'm trying to discover any other possibilities before turning to that one.

Cheers in advance if anyone reads this.

You're my only hope, guys and gals, I guess.

verbst

Hi, I’m having trouble getting sound from my Marshall Code 50 amp to record on Audacity.

I am running a new, working USB B cable from my Marshall Code 50 to a Dell Latitude 7280 running Windows 10. The computer is able to detect the amp USB input, and I am using the ‘CODE 50 digtal interface’ as my default recording device on both my soundcard and Audacity, however there is no sound output coming from the amp shown on Audacity , when I try to record (sound is produced from the amp’s speakers, however Audacity is not showing or recording any sound output). I am sure that the connection is working and the amp/ computer is not faulty, as I am able to download tone presets from the MyMarshall preset page. I have tried restarting both my laptop and amp multiple times, using different cables, using different USB ports, AND have the newest 1.41 CODE software, newest Audacity software, and newest version of my Intel HD sound drivers, but to no effect. I am on the verge of going insane from this as I have being trying for over 10 hours, and have had no results. This has worked for me previously, as I last recorded to Audacity with all the same settings about a month ago, however it’s simply not working anymore. I need to get it fixed ASAP, as I am due to record tomorrow, so any help would be greatly appreciated.

Does anyone know a way to combat the huge jump in volume when switching from Clean to Crunch on the Classic Gain channel? I’d like the switch to be as simple as pushing the button without the need to alter volume settings.

Hi,

I have two Marshall Stanmore Multiroom speakers and I keep having issues with streaming music. I've contacted support multiple times and while they are friendly and try to help as best as they can, I still don't have a solution.

The setup is the following: my two Stanmore Multiroom speakers are in the same room, about 6 meters apart from each other. I have saved a couple of online radio stations and spotify playlists on the devices. The wireless router (a Fritzbox with 2.4GHz and 5GHz enabled) is in the same room, 2 meter from the first Stanmore, 4 meters from the other. 

The problem: When streaming music, half the time it's crackling. By crackling I mean the sound similiar to someone touching the needle of a record player. This is very annoying and not something you want with a speaker you paid €450 for... Now, as both these speakers have this problem, I thought my network was not sufficient. Speedtests (while the crackling is occurring) show I get about 200Mbps down and 30Mbps up. I even bought the Fritzbox to place in the same room to try and solve this problem. 

On the 5GHz network, both speakers only have a signal strength of 25%-45%. On the 2.4GHz network, both speakers get 55%-60%. The crackling occurs on both networks. There is no other wifi network in my surroundings using the same channel, this can be checked on the Fritzbox. This seems to be a very low signal strength while the router is in the same room, with no blocking walls...

The online streams and spotify lists don't have any issues when I listen to them on my phone/laptop, only on the Stanmores.

The last thing support said was to send the speakers to repairs, but I have read the instructions and when they don't find an issue, I need to pay for their work. I would like to make sure I have two faulty speakers before I would return these. Are there any solutions I haven't tried yet? The thing that worries me is that these Stanmore Multirooms are no longer in production... Is this a known problem?

I hope someone can help me with this frustrating issue... Thanks in advance! 

Hi!

I have a Marshall DSL40CR and a PEDL-91016 footswitch.

(By the way, there is no manual online for the PEDL-91016 footswitch.)

Is it possible to program the footswitch for particular combinations of channel + master volume.  What I would like is...

Button 1 = Classic Gain Green + Master Volume 2

Button 2 = Classic Gain Red + Master Volume 1

Button 3 = Ultra Gain Green + Master Volume 1

Button 4 = Ultra Gain Red + Master Volume 1

Button 5 = Master Volume (toggles MV 1 and MV2 ...no change to default functionality).

The context is that I want my Master Volume 1 to be "Rhythm Loudness" and Master Volume 2 to be "Lead/Solo Loudness."  However the loudness for the Classic/Green channel is too low so I want to default it to "Lead/Solo Loudness" (aka Master Volume 2) for unity loudness to the other rhythm channels.

Thanks!

-James

When I download presets from the My Marshall website, how can I then transfer/import them to either the Gateway on my iPad, or to the Code 25 amp itself?

I can control the amp from the iPad, but it will only let me use the 99 presets already loaded.

I have a 2000 JCM 2000 DSL.  I've read much about bias drift being a problem on some of the early ones due to a defective PCB main board.  Are the replacement boards available commercially free of this defect?  Is there a specific issue of board to get in order to be free of the problem?  I don't have the issue presently on my amp but am considering buying a board to have as a backup.

Thanks!

Dave

I have a question on the Marshall Code 50 amp. Is it possible to connect the amp with a usb cable to a pc (Windows 10) and be listening to anything on the pc's soundcard, YouTube, media player, etc. and play guitar through the amp at the same time?

Hi, I've just bought a Marshall Code 50 which worked 2 days ago and again 20 minutes ago but after trying to pair with (a) Android Samsung phone (unsuccessful) then (b) iPad (also unsuccessful) the amp turned off and now will not turn on. Power supply is working, no power cut. Any advice apart from return the unit?!?!