my code worked ok with my galaxy 5 but i got a new moto z running android 7.1.1 and it will connect to bluetooth but will not connect in gateway. when i push scan for amps it never finds the code amp and yes i pushed the bluetooth buttons on the amp. in the gateway app the in the bottom left corner the amp/phone icon is missing for switching from amp to phone presets. the screen has the blue preset shown but the library has them in yellow. the worst part is that the display on the code amp is not working. it is barely readable. just yellow with the black barely visable. so without being able to program it using the display it doesn't work with my phone either. i have owned a lot of marshalls and still have a bunch but i have never been so dissapointed as i am with this piece of crapp. can't use it live because of the dropouts when switching channels and yea i know about using the same amps and settings in all the presets but that is unaceptable. i have the footswitch and thats a disaster too. one little slip like accidently pushing two buttons at the same time or too fast or twice freezes the amp or reprograms it. yea really cool turning it off and back on in the middle of a song. i tried using it live once and it was a disaster. never again. so i love the tone for recording but now i can't even do that because it wont connect bluetooth and the display is almost dead so i can't program it.
When I try to load preset from code to pc, there is: Error while decoding sysex: Error_Bad_Device_ID. How can I fix it?
Does anyone recommend a preset, or have a list of settings?
I made precise adjustments for the preset #79 on Marshall Code. I tried many times to share it; my amp is well plugged to my computer, and each time I try to share my own preset I get this message: "You cannot share this preset, as the settings match an existing Factory Preset." I don't understand because my own adjustments don't match the original Factory Preset...
Has anyone ever had this problem?
Hi,
I've modified about 50 presets on my code 50 amp. I have recently installed the gateway app on my android phone and works well with teh amp.
I want to backup al my modified preset from my amp to another place, for instance on my marshall cloud.
When I connect my phone and the gate way amp and I select to save the preset and make sure that save to libary option is selected I can save the preset. When I logged on the my marshall nothing of the modified names is visible on my marshall. Also when I checked the library on the phone nothing has changed.
I only can see my modified presets when I connect to the amp. (Golden modify buttons)
My question: How can I backup all my modified presets to a cloud or locally on my phone in a easy user friendly way ?
Hi, I’m having trouble getting sound from my Marshall Code 50 amp to record on Audacity.
I am running a new, working USB B cable from my Marshall Code 50 to a Dell Latitude 7280 running Windows 10. The computer is able to detect the amp USB input, and I am using the ‘CODE 50 digtal interface’ as my default recording device on both my soundcard and Audacity, however there is no sound output coming from the amp shown on Audacity , when I try to record (sound is produced from the amp’s speakers, however Audacity is not showing or recording any sound output). I am sure that the connection is working and the amp/ computer is not faulty, as I am able to download tone presets from the MyMarshall preset page. I have tried restarting both my laptop and amp multiple times, using different cables, using different USB ports, AND have the newest 1.41 CODE software, newest Audacity software, and newest version of my Intel HD sound drivers, but to no effect. I am on the verge of going insane from this as I have being trying for over 10 hours, and have had no results. This has worked for me previously, as I last recorded to Audacity with all the same settings about a month ago, however it’s simply not working anymore. I need to get it fixed ASAP, as I am due to record tomorrow, so any help would be greatly appreciated.
Just got a code 25, loaded Marshall gateway on my samsung J3 android phone and noticed when you choose a patch from the library the threshold setting shown on early videos now appears to have morphed into Gate? Is this an error on the latest update.?? Has anyone else noticed this.
regards Lee
I have a Code 50, so I turn to a particular preset and it includes say, flanger. how do I turn off the flanger and maybe add chorus instead. I know that the MOD section can be turned off. If it is on are the inactive effects simply zeroed out or is there a way to enable and disable each different effect. thanks. It looks like this applies to PRE EX, DEL and REV as well.
A second question is can I use the headphone out into either the guitar input or effect return of a second amp, either tube or SS?
thanks
Ok, don't curse me ok, but, is it cool to use external effects with a code amp? I hav a nice pedal board and I thought it may save me me from switching preset during a song.
Hi, how can I upload the presets from my code 50 amp to my gateway in my.marshall.com and change the order?
I'd like to know how to fix this problem because i cannot play without my headphones in the amp which is very annoying. I've factory reset it but if i change the preset it gives me after i factory reset it doesnt make any sound. I'd apppreciate some feedback, thanks
hi
firstly, i am disappointed with the code. this amp seems like its still at test phase, its to buggy for a release. would expect marshall to only release a new product unless its 100% reliable.
connecting ios devices to code is always problematic. very unstable.
my main problem now is updating firmware. cant update in chrome. i have midi capability approved for marshall but keep getting midid disabled error even though i clearly have midi enabled.
tried opera, and the midi is working and the code is coming up as connected. i get as far as a message stating that firmware is updating with a status bar and percentage marker. doesnt update! stays at 0% and never moves. left it overnight and still 0% when i woke.
i have spent more time messing about with the problems with this amp than playing guitar. do i need to sell this and just buy a guitar interface? maybe
also, when using this amp through garageband there is no dedicated clean preset to use with garageband or other AU. basically it goes into garageband with a marshall preset and then the other AU preset is on top of the marshall preset. ideally this amp should include a straight clean unprocessed preset to work with other software AU's. i really do think people need to consider a good quality guitar interface before purchasing this amp. its very restricitve and unreliable. if you are not gigginG i dont see the point in this amp.
CAN SOMEONE HELP ME WITH THE FIRMWARE ISSUE ASAP!
The presets list is different on my code 100 head compare with the Marshall gateway (the first 14 presets) so is the 100 head different compare to Marshall gateway or the other code amps? and i tryed to reset the amp but the presents still different compare to the gateway.
Having spent a week amending presets directly on the amp is there any way now to copy them to my iPhone so I can use the iPhone and not use the original factory resets ?
Why are my 2 code amps still different after doing the update and reset? The newer 100 has different presets than my 50. Even afer the update. Are these amps different and will have different presets?
This is just the same question I asked before. I couldnt bump it up som that Marshall would see it and respond.
before i downloaded the upgrades for my code 50, occaisionally it would go into silent mode when trying to save a preset, but changing the presets name mode was easily gotten to. Now that i have the download the saving/ silent mode bug is gone but it takes forever to get the changing the name mode...it either goes to save or scrolling letters....is there another upgrade for this or is this just a by product of the silent mode fix?
I'd really like the ability to roll back firmware updates. The tone of this amp has got worse with each firmware update I've installed. I wish I would have left it at the default when I got it.
The first firmware update I installed ruined the DSL, and 50's British amps, and now this last update has ruined everything else. All the presets I created sound completely different now. What a waste!
I'm really beginning to regret buying a digital amp.
I just did a update to the Code 50 and it still has different presets than the newer 100 ? Preset #9 on the 100 is called Classic Metal and on the 50 its called American 60's. this makes me wonder if it truly took the update???
Hello.
Just downloaded the latest firmware updates and updated all my CODE amps. (almost a full-time job lemme tell ya!!! LOL!!! Only joking!!!). No problems with the updates at all.
I do, however, have a suggestion Team Marshall:
Can you not change the firmware updates page to reflect the current firmware revision and release date (and, if it's not TOO much trouble, maybe include all previous firmware versions and their changelogs)???
Reason for my suggestion above:
Only reason I knew that there was a new firmware update was because I was browsing presets and happened to notice that a new section had been created detailing presets contained in the newest firmware version.
In other words: it'd be nice to know as and when new firmware updates become available so that we all know to download and install the latest firmware updates.
As for the sidenote mentioned in the title of this message:
Be aware that although the new firmware includes some new presets and the website indicates that it does not overwrite existing presets: this is only true if you do NOT reset your CODE amp. to factory defaults after the latest firmware update. In other words: if you download and install the latest version of the firmware and then reset your CODE amp to factory defaults then the NEW presets take effect and the old, original, factory default presets are overwritten. Not really a big issue but you need to be aware anyway.
Regards,
Dale.
