I connected my Code 50 to my laptop via bluetooth, but the my.marshall presets says "CODE not connected". I tried connecting via USB, but the amp has a goofy connector that standard USB cables do not connect to. Also - I can connect via the Gateway app on my phone, but the presets I add to My Library do not show up (even though it says that they have synced). 

When I download presets from the My Marshall website, how can I then transfer/import them to either the Gateway on my iPad, or to the Code 25 amp itself?

I can control the amp from the iPad, but it will only let me use the 99 presets already loaded.

I registered my amp on My Marshall but I don"t see where it's listed. After I registered the amp I don't see it listed as part of my profile. There should be a "registered amp" tab so that I can access the serial number if I need it. Thanks.

Is anybody aware of the timing for the release of the PEDL-91016?

I have a DSL100H, the 2012-2018 version (not the new R).

I am looking for a footswitch that allows more switching than the provided 2-button that came with the head. I have found the PEDL-91016, but it's specified for the DSL100HR, not the DSL100H.

The two-button footswitch supplied only allows going back and forth between Classic Gain and Ultra Gain. I'd like to be able to switch between Classic Gain Clean, Classic Gain Crunch, Ultra Gain Lead 1, and Ultra Gain Lead 2.

Has anyone tried the PEDL-91016 switch with the non R DSL100H model? Does it work? If not, is there a footswitch that allows switching as I've described above?

Hey,

Just got a Marshall Stanmore, and when listening to calmer songs, I can hear a significant amount of distortion. Like a fuzzy overdrive.
Overall, the speaker sounds great, especially on higher volume, but I still can't get over the annoying distortion. Really low-key piano songs are virtually unbearable to listen to. 

Has anyone else had this problem?

Hi, I have a question about the Studio Series SV20H and SC20H DI OUT

The user manual say the DI OUT have emulation, but in both of your official product video on youtube (for SC20H and SV20H), Steve say the DI OUT is NOT emulated so it's perfect to use with our own Impulse response...

So who is right, the user manual or Marshall official product video?

https://www.youtube.com/watch?v=GvuQPnqMktc   at 2min43 he talk about the DI OUT and he say same for the video for the SC20H

Thanks in advance!

Stephane

Hello,

is there a solution for a better adjusting the Master Volume of the Code 50 . Actually i turn the Master Volume to 1, if i turn it up to 1.4 it's too loud. I don't want to adjust the PreAmp Volume, cause it will change the tone. I want to adjust the overall sound with the Master Volume and keep all the tone settings, no matter if i play at home or with the band. I also read the article "CODE 50 Master Volume Issue " from 26.Oct.2016. Is there a solution in the meantime?

Regards
Wolfgang

I just purchased a new DSL100H and provided a footswitch that doesn't work. It tries to switch channels but as soon as I lift my foot the channel reverts back.  The model number of the switch is PEDL-90010.  I read in the manual that the switch I should've received is a PEDL-90009.  They both look similar but does anyone know if that makes a difference? Thanks.

I bought this DSL40CR 3 weeks ago. When the effects loop is turned on there is a volume drop and treble drop. The high end virtually disappears. Even turning up the treble or resonance doesn't quite fix it either.

It sounds virtually identical if I switch from 40 watt mode to 20 watt mode, without the effects loop engaged. 

In 20 watt mode with the effect loop engaged the volume/treble drop is even worse. This happens when effects loop is engaged through the 6 button footswitch and on the panel.

Is this a normal function of the amp?

I need to buy headphones for work, and to practice guitar at home.

For work I need bluetooth headphones, but for guitar practice, I need wired.

I've already had problems with my Sennheiser wireless headphones, so I want to make sure thse are compatable with the code 50 amp.

Can someone confirm that the major II headset will work with the code 50 amp using the 3.5m mini jack cable that comes with the headset?

Thanks

Gerbrand

Hi,
I find my Code 25 amp too loud at practice levels (at least for my apartment) so I have to set the Master Volume between 0.1-0.9 and in that  range the Master Volume varies greatly which makes almost impossible to adjust it at the same value twice.

It will be nice if the Master knob could also be set via software so it can be saved/stored and also displayed in the amp's front panel screen, since it is very common to move the amp from one room to another and accidentally change the Master setting without knowing at what level it was previously set.
Coud be possible to add this option in a future firmware/app update?

Thanks in advance!

Does anyone know a way to combat the huge jump in volume when switching from Clean to Crunch on the Classic Gain channel? I’d like the switch to be as simple as pushing the button without the need to alter volume settings.

Hi,

I am happy owner of CODE 25 for almost half of the year. 

I love to play with it but I have frustrating problem with connecting Gateway app to it.  Bluetooth connection works fine immediately after switching on the amp my iphone is connected, no problem, but then Gateway application connection to CODE drops after while.  Then I need to go through connecting  all over again, this I switch of Bluetooth on my phone and after swithing it on again and relaunching Gateway I'm connected to CODE. Unfortunately after few minutes the connection breaks again. And at all time my Iphone is connected properly via Bluetooth to the amp! So I'm reconnecting again and again and again...Quite annoying.

Any kind of advice for remediation of such issue is mych appreciated.

Regards,

Krzysztof

Hi, I've just bought a Marshall Code 50 which worked 2 days ago and again 20 minutes ago but after trying to pair with (a) Android Samsung phone (unsuccessful) then (b) iPad (also unsuccessful) the amp turned off and now will not turn on. Power supply is working, no power cut. Any advice apart from return the unit?!?!

Hello, i have a problem connecting my acton 2 speaker to the laptop. I find it on the laptop, pair it with the speaker and it gives out a message that the speaker has 0% battery and doesnt play anything, even though the speaker is connected through power cable. The 3,5 jack works, but bluetooth doesn't.

Hi there,

I have a problem with the Stanmore II Speaker.
It is connected via Cable to Amazons Alexa. When music is played, it always is ínterrupted by the starting/pairing sound (that e-guitar chords)
as if some device is trying to connect with the speaker. we turned every device nearby off (which shouldn't be the idea, right?) but it still
continues. it's quite annoying.

any ideas?

does anyone know where i can get a dsl 5 cr schmeatic ? needing for valve cange and justage of bias :) 

Hi,

I listen to music through wifi/spotify on my Marshall Acton. The past few weeks I notice occasionally that it will turn on and play randomly. This sometimes happens very early or late at night at very loud volumes to the point where I've had to unplug the speaker when I'm asleep. I've now debugged the issue to an unknown bluetooth device connecting. I can see it is some kind of DESKTOP device (which I don't own); I see it pop up occasionally on the ios app as connected. 

It must be a neighbor in my apartment complex either doing this on accident or pranking me (doesn't really matter). But I can't seem to stop it. I don't use bluetooth and have never connected to the speaker via bluetooth. Can I disable bluetooth or somehow reset it to stop the unknown device from connecting? I love the speaker otherwise but it's a huge hassle to have this issue. 

Thanks!

How do you assign the tuner to the footswitch?