Hi Everyone,
I live in Australia, and purchased this cabnet when I was 18 and Im now 51
I was told by the previous owner that it was a late 60's cab
Stupidly in the 80's I recovered it in a stylish grey carpet (as per photos)
I am now trying to take it back to original and trying to find the Head to match.
If anyone could please tell me the vintage and if its worth doing.
Many thanks and look forward to any replies
Cheers Marty
I bought this amp a few weks ago and all was well with connecting to my Iphone 6s, both on the main bluetooth of the phone and the gateway app.
Then a few weeks later I tried to connect my phone and since then I only recieve the message: 'Connection Unsuccessful, make sure "CODE..." is turned on and in range'. I continue to get this message despite the amp being turned on and in range.
In addition, the amp can be connected to on other devices such as my friedns iphone and my pc.
So far I have followed the proceedures suggested of the correct sequencing, but this problem seems to be more deep rooted.
Please help!
Hi Marshall,
I purchased this CODE25-E last year 23/SEP/16, but now since this week, the amp is malfunctioning. CODE25-E going silent during playing suddenly and also during the start it's very random. Since the output is same as before so there must be the issue in the electronic circuit.
Please help me to get this replaced ASAP.
Thanks
Hey guys,
So I just bought a new MG102CFX, love this thing! I also bought the 4-button Marshall stomp footswitch, and everything is working perfectly. My question is, I'm new to using pedals. So far I only have a Boss MT-2 distortion pedal. I don't want to damage any circuitry. If I'm only using one pedal, and not a daisy chain board setup with multiple pedals, do I bypass the Send/Return jacks, and simply plug my guitar into the Boss input, and the then the Boss output into to the MG102CFX front input jack? In otherwords, is the Send/Return jacks only for two or more pedals? I read all the manuals but this questions wasn't addressed.
thanks guys!
Bill
What kind of fuse does my haze 40 use. What size how many amps etc where can i get one and also a fuse holder its a mhz40c i think
i noticed a strange ping in almost any preset.
i did a firmware update and the ping gone.
i turned off my amp and turned on, and the ping was there.
i did a firmware update and the ping gone.
i turned off my amp and turned on, and the ping was there.
i did a firmware update and the ping gone.
i turned off my amp and turned on, and the ping was there.
and so on.
it's in the AMP section. when i turn off AMP the ping is gone but also the AMP that i was using.
Also i reseted the Code 50 to Factory conditions and the ping is gone, but when i turned off/on the ping is back.
What can i do to resolve this?
Hello,
I just joined the forum so please excuse any incorrect behavior. I have a new dsl 40c with maybe 4 hours under its belt and all of a sudden with no warning it quit working. No sound whatsoever. The power light comes on and the tubes all appear to be glowing. It's still under warranty but I'm really questioning this purchase. After going online and visiting a few groups it seems like this is a fairly common issue. I guess what I'm looking for is a few people to comfort me in my time of need! Comments ate certainly welcome. Thanks so much!
Dave DiPaola
Well, I've read through all the questions and answers I can. My Android used to pair fine with my CODE 50. Now, it will not connect. I've reinstalled firmware, reinstalled the Gateway app, deleted and re-paired the amp. Very frustrating. It seems there are lots of issues with this. I can hear the amp pair with the phone via bluetooth, but it will not connect with the Gateway. "Connecting..." appears and doesn't go away. I'm bummed. This was a fun amp, but if the bluetooth doesn't work... anyone got a fix? Thanks. Bill
Hello
my LG K4 with Android 5.1.1. is not supported. When will it be supported?
(Chip Mediatek MT6735M, Grafic module Mali T720 MP2, 1GB ram)
What can I do to use the gateway app without having to buy another smartphone/tablet?
I own a Marshall MG100dfx combo and want to place a volume pedal through the Fx loop. Should i use a High or Low impedance pedal in that position for the best results?
Thanks in advance.
What kind of headphone is most recommended to use marshall code 25 as a study implementer?
Hi, can I get a owner's manual in portuguese? How do I do?
Thank's!
If anyone had warranty work/repair done on their amp, how long was it before you got your amp?
I have been patiently waiting for Guitar Center to get these in stock. Three days ago, I saw there was light at the end of the tunnel... They were to be made available on August 7th! So, I hastily ordered two of them. This morning, I checked on my order, and the availability date is now October 9th!
Seriously, why the delay? Why can we not get a firm release date? How will Marshall make this right with loyal, dedicated customers who won't just cancel their orders and go buy another brand?
My DSL401 has just started to intermittently volume drop i.e. the volume gently fades down to nothing - leave it a while, and the volume returns to normal. Also, the effects loop doesn't seem to work as it used to - for example, if I plug a delay in to it, the delay is hardly noticeable when you play. Not sure if the issues are related or not. I've not had any issues at all over the last 12 years and the tubes have not been swapped out. Grateful for any advice. Thanks in advance.
I purchased the code 50 amp in February and installed the Gateway app on my iPhone iOS 10 and the playback feature worked great. I currently have a Gateway app software 1.4.1 . Several months ago I realized that the playback feature did not work. I wasn't sure at first if it was an update on the iPhone software but I figured it was probably a common problem and would be fixed shortly but it has been several months now and still having the same problem. I also tried the app on a different iPhone that had a different software version and had the same result. It looks like a similar problem was happening on the Google play app version and was fixed with the 1.4.2 software. The playback feature can be selected and you can pick a song out of my library but it will not play.
Got a Code 50 and footswitch. Still learning it, but happy so far.
I'd like to use the footswitch, in part, to jack up the volume for solos, but keeping the preset and effects the same. What's the best way to set that up?
Hi,
I'm excited to buy a new solid state CODE 50 or 100 as my main gig/practice/recording amp. Before I do, can someone please explain if the included Gateway software can actually record new songs onto my windows pc via the USB port, and can it save the song as an mp3 or wav file, which I can later import into my DAW software to edit?
thanks,
Bill