ok hit a cord , let it ring and switch presets. hear that tiny drop out? it does that with the footswitch too. i play in a band where i run sound from stage and i turn my solos up by switching to a preset with more gain and volume but how can i do that if it dropps out noticibly for an instant. if you use the same amp in the presets 1jcm, 2jcm more gain and volume,  3jcm  you can switch with no drop out but if you change amps 1jcm, 2 silver jubile, 3 jvm it drops out.  big glitch marshall. i might expect something like this from behringer but not you . shame shame shame

Code 50 will connect MIDI to phone, but amp will not connect. Running Android 6.01 on Samsung S5, Bluetooth LE compatible. Have tried the fixes in Forum, unloaded/loaded Gateway, removed/added device from bluetooth....nothing. Phone will pair with the amp and you can stream music, but Gateway will not connect even after pairing. Do I have a defective amp???  There are several users on the forum with this issue. PLEASE HELP.  Like the tones and flexibility, but if bluetooth will not work, I'll send it back and get the tube H&K. Jamie

not a question, but I just got a switched 1/4 female jack and a 1 hole can to put in the back of my code 50 to allow me to connect it to a 4ohm external cabinet - like a Raven RG412.  I will post pictures after I do it.

Is this amp worth picking up ,  I know it's an acoustic amp. What do you guys and gals think 

My Marshall is no longer running the boost channel. Everything works perfectly, the clean channel and the overdrive are working perfectly, but when I turn on the boost channel the overdrive does not emit sound, it loses the full volume. I do not know what to do to solve the problem. I'm in Brazil and I do not know if there is technical assistance here.

Rarely use external cabs - but want to use the combo's 16ohm speaker and an 8ohm one from open-back  cab just to see how it rolls.   

Any ideas?

Thanks.

Good evening I bought a pair of Major II model headphones, no bluetooth, if I connect them to the pc no problem, but just plug them into an mp3 player you hear a low sound, kind of out of phase and to try to improve the situation I have to keep Pressed the remote control key.
Do you think it's normal? Thank you for your response

Has the Code 100 head or combo ever shipped to US retailers? For 2 years they keep moving stock dates, but never send an e-mail they have received inventory.

Dear Marshall Team,

I just get my footswitch and it comes with interconnceting cable and work just fine.

When I check the cable, it just normal cable with 2 wires in it. And I believe it is used to power up the footswitch with some DC voltage. I am curious how the digital data was transfered between the amp and the switch. Is it through the same wires or wirelessly?

If it is wireless, can I supply the DC power to the footswitch (at front of the stage) and put the amp on the back? What is the voltage and polarity?

Javen

i´m editing presets on code 25 using my android phone and save to my phone library
My quersions are:
 How can I backup my Library?
and
How can restore this library or copy to my Android Tablet?

thanx

Some times when i´m editing presets, the amp is suddenly muted and the Marshall Gateway app freezes
and   Marshall Gateway app  loose  bluethoot connection with the amp very often
I´m editing presets with an android phone and tablet samung

HOW CAN I DOWNLOAD PRESETS TO MY CODE 50

I am having trouble connecting my phone to my code 50 amp. Bluetooth is enabled and I have turned the amp and phone on/off many times but still cannot connect.  The amp is listed on my phones bluetooth but cannnot connect. It is an iphone 4s. What can i do?

NEEDED RESPONSE FOR LOW MARSHALL REF VL VE00051 WHERE YOU CAN GET IT. COULD ANY HELP ME.

Hi, i am using a code 50, and i cannot store the vlume levels in presets.

I am using 3 diferent presets, but i cannot level the volumes, i think that CODE dont store that.

How can i solve this ?? Its very importan, otherwise its a complete mess....all the presets with diferente volume levels....

Please HELP ME !!!

Thanks

Hello guys,

I recently purchased a Year model 1973 50 watt Plexi head and wanted to replace the knobs on the amp.  The current knobs have set-screw knobs. 

Question:  Do the push-on replacement knobs fit properly on the shafts?  Or do I need to replace with set-screw knobs only?

Thanks

Victor

Hi 

This is more of a warning than a question -

I made the mistake of buying a used JVM210c on ebay -  it was problematic from day one. I spent well over a $1,000 on repairs over the course of a year.

I finally found a tech who knew what he was doing - turns out the JVM210c has issues with the preamp pc board. The amp sounds greats since the board was replaced and have had no new issues.

I don't know how widespread the issue is but make sure you get a good warranty before you buy.

Today I tried to connect my guitar via iRig and a common audio cable to my Code 50.

The sound was really muddy without any treble... Same when I play music from my phone over the audio input... 

Can anyone confirm this?

And is there a way to control the input volume?

Thanks and regards 

Seb

The CODE Footswitch manual is not very informative.

I watched all the youtube videos I could find on it but I'm still confused on how some of the functions operate.

Can anyone provide me with a link to a more comprehensive document?

Thanks,

just got an iPad Pro through my job and would live to try and record my code 25 using the micro usb output. Anyone know how I can do this? Does anyone make a cable with a male micro usb on one end and a male lightning connector on the othe end? Do I need a specific interface or can I use some kind of adapter? Can't seem to easily find anything on the ole interwebs about how to do this. TIA.