Is it possible to download a preset from Marshall and put it on another amp like Blackstar?

Hi, is there any technical documentation about valves replacement and bias setting?

I own a JCM 2000 DSL 401 and I need information before replacing valves (pairing, model, usage, bias setting).

Thank you.

I really like the sound of reverse reverb. Only problem is that the code amps do not offer such effect. I was wondering if anyone knows a solution or if this effect might be something that could be added with an update?

Kind regards,

Joris

Is there a record of my amps identity or serial number on here 

Recently I heard a loud pop when going from standby to the 40 watt channel.  Amp still seems to work ok but since then there is a kind of minor but noticeable high pitch sound when on that 40 watt channel.  Cant hear it when on 20 watt.   You can hear it with nothing plugged into the amp and also when my guitar is plugged in.   The only noise noticeable before was just the normal kind of hiss sound that seems to be normal.   Also it doesnt get worse or better by turning the volume up or down.  Its just kind of there from the moment you click it on to the 40 watt.   Can hear it on clean channels also.   I'm 90 percent sure it seemed to have started right after that loud kind of pop when going from standy to the 40 watt.    Any thoughts or ideas on how to solve this?    Thanks for any input!!

I have a two part question 🤔.  I have my two amplifiers listed above.  I have both electric and electric acoustic guitars.  I'm learning how to play and bought the 50 watt acoustic Amp as I  really like the sound of over wound humbuckers through it for heavy slow blues.

First question,  keeping the AS50D as the main sound, can I connect it through/to the 100 watt Marshall? Both are 4 ohms and I would like the maximum amount of power to drive my 4 x 12" cabinet of 8 ohm Jensen Tornadoes that are wired in series for the 4 ohm 100 watt MG HDFX. Then I would have 150 watts total to drive my 400 watt total limit.

Question two,  can I connect my 50 watt AS50D Amp to my 4 x 12" speaker cabinet by running a cable from the back of my Amp to the cabinet. I have footswitch,  line out and (effects loops) send and return Jack's to use.

  Even though my 4 x 12" cabinet would be very under powered. I would like to hear the sound of the AS50D  through those speakers. I'm new to guitar and don't want to ruin any of my equipment.  I did also have a guitar made through two luthiers,  I also made the 4 x 12" cabinet to match my guitar.  I call them Snort and the box.

  I have the components for the sound I'm looking for,  now I need to combine them all together.  I truly appreciate guidance from the technical support team at Marshall. 

God bless you for your time and kindness.  Thank you,  Eric Dailey 

When trying to get additional presets I am getting Code Not Connected even though it is.

I'm using Google Chrome browser.

What am I missing?

Please help.

The question is simple. Elements that are adjacent to the head microphones can be made of iron? My second headphones fall apart on them. I have to wrap them with duct tape

I am awaiting delivery of a Godin A6 Ultra hybrid guitar, and have a Code 50 amp.

As the guitar has  both an acoustic and an electric ouput jack, I need some advice as to how I could best set it up to play through the amp?

Thanks.

speaker was damaged by the rain

Hi, I have a Marshall Origin 50C, and it started to degrade in sound. I checked the circuit and descovered that the, C31, eletrolitic capacitor is leaking, and the acid have deleted the info of the capacitor values.

Can anyone please help me with this information?

Thank you.

I bought a ditto + looper pedal but as soon as it is on there is a huge hissing and whirring sound through my code 25 . Is there any way to stop this annoying noise, because if i cant use a looper pedal i might sell the amp and get one that works with a looper.

Hi,

are Bluesbreaker II pedals still built? Tried to find a new one, but  saw only used ones on ebay. 

Konrad

Need a replacement  mid range  pot for my mg15r

What value is this?

Hello folks, I have just bought the Marshall Code 100 which I was really excited about having read the description and watched the demo videos. The amp does sound amazing, but yesterday, on the first occasion that I actually tried the amp during a rehearsal, I was shocked to discover that when I step on the provided footswitch to change presets (like activating one with distortion or heavy delay), mid-song, the flow of the sound broke, there was a moment of silence before it switched to the next preset. I've been trying to research this on the Internet, but have only found 2 instances of it being addressed, no one talks about this in review videos or blogs. This baffles me - how is (mostly) everyone ok with this?

This effectively makes it impossible to use the built-in effects of the amp, which is exactly what its main outstanding feature is. Why have 100 presets when you can't switch mid-song? Are guitarists only supposed to use the Code family to select the main sound they want for a certain song, then keep using pedals for changes mid-song?

I'm extremely disappointed since the built-in effects were the main reason I went for this amp - I wanted to use this as both an amp and a multi-effect board to some extent. Is there any fix for this? A firmware update may be, or does the separately-sold Code pedal make a difference? 

Seriously considering returning it at this point. Advance thanks for the replies. 

The connection via bluetooth and the  Androidphone will work. The amp and the phone ist pared but the gateway app doesn´t recognise the amp. What is wrong? Are i am stupid or what the f***** is the reason? I updated the firmware of the amp... Please help me or give me detailed advices!

I need the Electric Diagram for the marshall code 50 amp and footswitch, both stopped working and my Electric guy is asking for it to make it work again, we are not founding it ob Internet, thanks!

Hello All,

I´m beginner in guitar playing, can somewho help me find aro create The Darkness preset for my Code 25?

IS THERE A RECOMMENDED TIME/PERIOD BEFORE I SWITCH MY  MARSHALL DSL20CR TO HIGH/LOW  OUTPUT AFTER TURNING ON? LIKE HOW MANY SECONDS OR MINUTES OF WARM UP ON STANDBY? 

Can I update the firmware via USB on my code 50 if I use a Mac?