hi .. anyone can help me to create preset "modern high gain" like jeff loomis,keith merrow sound? is it marshall code can do it???? lets share and learn . thx a lot

I cannot registered preset . Each time i need to do so by switching on editing button no sound on my code 50 and the amp is blocked. Is it a failure or a bad using. Do i have to return my amp and exchange

I am a beginner and I would like the equalization to sound to audioslave, if possible with the CODE 25. Thanks

Hi, I havent had any problems with my 2 Code100h that i run in stereo in my marshall 1960v cabs, in any way until now, besides the usual dirty pots.  I am trying to save the "in amp" tuner as a patch or an effect on a patch as the instructional video states. I do have the upgraded footswitch.  The only way ive found to acceas the tuner by footpedal is by turning one of the switch mode choices into the tuner, which makes every single patch have the tuner as the switch mode option. Kinda defeats the purpose. Is there any way to set the tuner as a patch by itself or as a switch mode option on just 1 patch and not all of them? 

Hello,

A few days ago I bought a Code 25 amp and I really like it but I have some questions about the presets. I connected the amp to my laptop and updated it to the latest firmware and found some presets that I like and want to use on my amp. How do I this? I saved hem go my library but how do I upload them to my amp? Hope to hear from you guys!

Greetings,

Bas

Hi there,

has anybody a good idea how to get "the" George-Lynch-sound, esp. the sound of the Dokken- or Lynch-Mob-era, with a CODE 50 (or has even a preset programmed already)?

Thx, Mark

I'm noticing a significant volume difference between the presets I have programmed on the footswitch in A2 & A3, is there a way to adjust this so the volume remains the same when switching between A2 & A3 ? 

I’ve read that there are 13 or so presets to be installed when updating the firmware. Unless I’m mistaken, I don’t see them on the amp. Anyone else see what’s going on?

how do you get the presets others have made into the gateway library cloud saved 100 presets so I can access them on my amp or do i just copy there presets and change one of the ones i have 

I've noticed that I have many presets with a very muddy, flabby low E string. Was wondering if anyone had noticed this and how they went then about
fixing it.  You will notice it when you play Power Chords on the E and A strings

Hi !

Any suggestions for Kings Of Leon presets please ? 

Some on the the presets like Blues Legend dont work at all with my Fender Squier Affinity Series Stratocaster while some others like Marshall Fury and most other metal presets have a background noise...... Pls help me.

My CODE 25 connects to my PC via both through MIDI in Chrome and through the Firmware Update Utility but it refuses to do anything but sit there while the gold loading circle just spins and spins. I've left it for upwards of 30 minutes. I'm unable to click on check for updates or anything. Tried rebooting a few times, tried turning blutooth off while doing it, etc. My amps current version according to both the amp and the app is v1.3. Any suggestion on what to try? Should I do some kind of factory reset to the amp and try again?  Any help or suggestions would be appreciated.

As a side note, I'm also unable to "download preset to amp" to test it out even though it's giving me the go ahead to do it on the preset site. I'm sure the issue is connected to being unable to update the firmware.

Thanks!

There are a lot of presets that have "threshold" values that can be tweaked, however I don't know where to change them. All I find is a "gate" option. Are they the same thing? If not, where can I find the threshold editor?

Hi please refer to this previous question to help explain the background to my question:  https://my.marshall.com/forum/question/1479/marshall-code-100---should-it-have-come-with-a-2-way-foot-switch?filterType=recent&myActivity=True

Basically I bought a Marshall code 100 (no it's not 100H or 100C just a plain 100). It was out of its box and on display but discounted by about $180 because it had a slight dent in the base. The store rep claimed it had not been used. I bought it due to the price but after a few months I realised it should have come with a 2 button footswitch. I then raised this fact with the store and they agreed to supply me with the one that should have come with it. It has been about 6 months since they promised me they would replace and every time I ring up they come up with some bullshit excuse like "oh our suppliers on the other side of the country claim it is not sold as a spare and they have to order it in and they are not receiving any new stock of this item until Feb". 

So Feb has come and gone so I am about to ring them and vent my frustrations on them. Then I thought maybe I could get the PEDL 91009 foot switch instead of the PEDL-91010, at a discounted price (perhaps to the value of the cheaper switch that should have come with it), as I am told it is much better.  As I have never had or even used a foot switch and am completely clueless on them I have a few questions:

Does the basic PEDL-91010 footswitch only allow you to switch to the next preset up or down on the preset list of 100 presets? Or can you jump from like preset number 4 to preset number 98? If it only allows you to switch to the next one up or down does the 91009 model allow you to switch between any two presets on my list? Does the 91009 model allow you to program more than 2 presets to switch between when playing a song? 

Finally, one responder to my other post mentioned that the Code 100 only comes with a basic 2 way footswitch and that the PEDL 91010 is an optional extra. But this contradicts what others were saying (eg that it is the PEDL 91010 footswitch that it comes with).

Anyway I am confused and need all this cleared up so I am fully armed when I next call the store.

Hey, one of my all time favorite riffs is Unchained from Van Halen. I'm trying to get that particular flanger sound on my code 50 but I just can't get it right. I found a few Van Halen presets but those are for other songs. The flanger in the Van Holy preset is too much over the top to my liking. A preset for this song would really be appreciated :-) 

So about a year ago I got a footswitch for my Code 50, and when i first got it, it started banking backwards on it's own. I was able to stop it...until now. The worst part of it, is when i go to use the amp's tuner, it immediately exits because it thinks the button is being pressed. When it began a few days ago, I was able to press the bank button to increase the bank and counteract the issue, but now the bank button stopped working. Maybe I pressed it too hard or too much or something. I cant remember how I fixed it last time or whether or not the bank button worked, but all I know is this time it might be done for good. If anyone knows of this issue or has had it happen to themselves, please let me know how I can fix it. I dont remember all the presets that were saved to it, but I can remember a couple. Please help!!!

Hello, I don't know if this is the place to ask but I'll try anyway.
For my Code50 I really would like to see Presets from guitarists like:

Johnny Marr (The Smiths)
Wayne Hussey (The Sisters Of Mercy / The Mission)
John McGeogh (Siouxsie and the Banshees / PIL)
Chris de Garmo (Queensrÿche)
Geordie (Killing Joke)
Robert Smith (The Cure)
East Bay Ray (Dead Kennedys)