Hi everyone!
Recently I bought Marshall CODE 25 and it's a great amp but I have one little problem with it.
There is a problem with MASTER potentiometer. I noticed that when I set it between 0-0.99 it is very very quiet but when I set it about 1.0 it becomes very loud. And in the effect it is very hard to play at "bedroom" volume levels. I must say that I'm disappointed - I had Yamaha THR 10 previously and it could play very well at every volume and it could play very quiet.
So to sum it up, is this some general issue with all CODE amps or something is broken in mine? Maybe master potentiometer needs repair?
I just bought my code 50 yesterday. The master volume is a real problem, I may have to return it just because of that. We can adjust the volume, but the second you change a preset it goes way too loud again. Even if I were to modify each of the 100 presets manually (which I am not in the mood to do), when the next firmware update happens those presets will be overwritten with the factory reset so back to square one.
Marshall, can you please give us a timeline for this? I have 30 days to return this thing to the store, I need an answer because I do not plan on living with this issue forever, maybe I will swap if for a Fender or Line6 or something with quicker response time from the manufacturer if need be... quite frustrated and only used the product for 30 minutes.
Hi,
I own a DSL20HR amp and I'd like to connect two 1x12 speaker cabinets to the amp simultaneously. Both cabinets are Marshall 1912 cabinets (1x12", 8ohm speaker). There are three speaker cabinet output jack sockets in DSL20HR:
one 1 x 16 OHM socket to connect a single 16ohm speaker cabinet, and
two 1x16 OHM sockets to connect two 16ohm speaker cabinets simultaneously or to connect a single 8 Ohm speaker cabinet to either one of these sockets.
How do I connect two 8ohm cabinets to this amp? I'd like to connect these cabs in series to have 16ohms in result, but the cabs don't have sockets for connecting them in series. There is only one input in 1912 cab. And if I find a device to connect this two amps in series, do I then connect the first cab's input cable to the DSL20HRs single 1x16 OHM input (the first input option)? Is this safe? The manual doesn't say anything about connecting cabinets in series.
Thank you! The new amp is great btw!
Ok, the buzz, fuzz I and others noticed (Its Real). First before you ask I tried the cable and the guitar on my Crate Amp. The notes ring like a bell No fuzz or Buzz.
So that eleminats my guitar and cable. I notice if I use eather the Acustic or Natural Pre Amps on my Code -50 the BUZZ / Fuzz dissipears. So I assume its not a hardware issue with the Code 50. I think its a software issue. Is it possiable to fix and down load new Pre Amp Modelse to fix the problem?
I would love to get this fixed! Its annoying!
hello,
Bluetooth connection is not very good in my opinion.
Bleutooth signal code 25 is ok, samsung s8 detects it alright.
But when i use the gateway android app it doesn't connect altough it shows in app as detected.
Is there a patch upcomming for the amp code series?
Greetings
Why does my code 50 amp cut out? Also, has loud crackeling sound when it's working. Sounds like a blown speaker but it's not. The master volume is only turned up 1/4 of the way and it's loud. Problems still remains even at lower volume. slight delay on the footswitch also when changing from one preset to another. Frustrated in Detroit.
I have been trying to connect to my PC for hours now. I have the latest version of chrome. And allowed the midi. Also I did the windows RT. still no connection Any help would be greatly appreciated
Hello guys! I recently updated my marshall code 25 firmware to version 1.41. However, when I turn it on it says on the screen "v 1.11" why?
I just updated the firmware and now I can't connect .
is it the update that is the problem?
Dear all.
In my code 50 fw 1.41, when I play, I hear noises eg preset 02,03.04,06,07 ... 93. Is it similar to you or do you have a clear sound (no noise)? My guitar Gibson les paul tribiute 2017 and I use cable Fender FG10.
The best Regards
Jaca
I can send a sample to interested persons
Hello!
I’ve just bought a Code 25 with footswitch and have just started to look at the presets. As far as I can see each amp sound corresponds to a number - for example Bluesbreaker Reverb is assigned to #44. Is there a way or re-assigning this e.g. to #1 ? I’d like to be able access some of the presets easily rather than having to scroll through all of the numbers.
Apologies if this has already been asked on the forum
Many thanks
Robin
This might mean that someone’s trying to fool you or steal any info you send to the server. You should close this site immediately.
Go to your Start page |
The website’s security certificate is not yet valid or has expired.
Error Code: DLG_FLAGS_SEC_CERT_DATE_INVALID
Hi All,
As it was mentioned on this forum connecting additional looper pedal isn't possible in a direct way, bacause there is no FX in and out.
I'm wondering If anyone has experience in building FX Loop using AUX In and Headphones Out in Marshall CODE 25/50 amp?
Can it work? If so, is this a good option?
Mike
How can I get the Marshall Gateway App to install on my ATT-ZTE Z971 Android version 7.1.1 cell phone ?
Google Play says my phone not supported. There are no warnings of this nature when buying the "CODE 50".
Has anyone tried using the code 50 with wireless headphones?
I have a pair of seinheiser 120ii, and I just get this weird "feedback" sound when I plug them in.
The headphones work fine on all my other devices, but not with this amp.
I tried 2 other sets of wired headphones, and they seem to work fine with the amp.
Is this a known problem, and is there something I can do to fix it?
Thanks
Gerbrand
Hi guys,
I've bought to my girlfriend for Christmas wireless headphones Marshall Major II Bluetooth. I can not connect them by bluetooth with any PC (Windows 10). Any of my PC's with Win 10 and BT technology won't see these headphones, although my android smartphone will see them. Is there any trick how to connect those headphones to PC? Is it even possible? I'm not talking about connection via a cable of course.
Thx for answer!
L.
Hello
In the manual is told not to use the Code 100 head without a speaker? Why?
I think it's not a valve amp.
Martin
One of my fave bands is The Tea Party, and they use a LOT of different tunings. However, the tuner in the app only has specific tunings saved. Is there a way to save other alternate tunings to Gateway?
I made this comment in response to another query and thought it would useful as part of the general forum...
Been following the comments about Bluetooth for a couple of weeks since I have been having the same problem. What I discovered is that the problem is not the amp but my phone. For all intents and purposes, the amp is just a dumb device that happens to have a Bluetooth connectivity board or circuit built into it. The primary connection device is the users phone, tablet, whatever that has the Bluetooth application. Anyone using a Bluetooth speaker should know and understand that the speaker has no application, just an ON/OFF switch and a Bluetooth circuit. It's the phone that makes the connection. So in my case, it was the phone that dropped or lost the connection to the amp. There was no way I could reconnect, even after shutting everything down and rebooting. Going through the Gateway app on my phone wouldn't work and the blue light on the amp would blink continually.
What I then tried was turning off my Bluetooth on the phone, reactivating, and getting the app to pair up again to the amp. Problem solved.
It's possible that all the wi-fi items I have in the house and garage are confusing the phone and Bluetooth but I haven't troubleshooted that as yet. I have found a simple work-around that, I agree, is less than ideal but gets me using the amp the way I want. I don't disagree with what users are saying but I also think that not every fault lies with the supplier. Perhaps a reasonable challenge to us users would be... if any musician is a programmer or electrical engineer then offer some assistance. I have yet to find any innovator who can design for every nuance we currently experience in this tech world. Also if anyone has another, better work-around then please submit to this forum.
Regards,
Hello,
My problem is quiet strange and I can not find any resolution for it.
To explain my problem I will start from beginning:
We have 2 places where are presets:
- 100 presets directly in amp
- 100 preset in gatway library
They are diffrent of course :)
I did some modificaiton in both places and I wanted to recover to factory settings.
So in gatway I pushed: MENU- > MY MARSHALL -> RESET GATEWAY PRESETS
After that I did factory reset on amp: Holding "AMP" button while switching on power -> holding store button to recover all presets.
After those actions I don't have original factory preset in amp but I have all the same preset from library.
So Gatway Library and presets directly on amp are the same!
To imagine this situation lets see few beginig presets:
Library:
00 JTM CHill
02 So American
03 19sixty2
Presets in amp:
00 JTM CHill
02 So American
03 19sixty2
They are even if I disconnect all Gatway and remove USB cable!
For example before this situation a had following presets:
06 Ambience
10 Metal edge
Now they are gone :(
I tried:
- reinstall updates
- do another facotry reset in amp
- disconnect/connect marshall gateway
Nothing helped.
While starting there are information about version.
It's "Version 1.11". I don't understand why it isn't 1.41 like last update ?!
I did update for sure.
Just one idea comming to my mind: There is way to do software reset and then do update to 1.41?
Please help me to solve this problem because I lost my favorite presets