Hi,

When I connect Phone via bluetooth, I can not see a presets, only "tab to sync" when I tab  it is shows this one and one or two more, but the rest is still tab to sync. Next connecting and all presets list is tab to sync again. Code do not want to synchronized with gateway. Do you have any idea how to change that? 

Hello,

Recently I bougth a code 50.

When I want to stream music with bluetooth to the code, you can hear all kind of interruptions. The further the distance, the worse. But even with the laptop at a distance of 1 meter, you can haven interuptions.

I tried to solve the problem by upgrading to the latest firmware, but this has no effect.

When I am treaming to an other bluetooth device with the same laptop, I don't have any problems even at a distance of 8 meter. So the problem must be in the code.

Does anyone has the same problem?

What to do, or is this a defect?

Thx. 

hello,

Bluetooth connection is not very good in my opinion.

Bleutooth signal code 25 is ok, samsung s8 detects it alright.

But when i use the gateway android app it doesn't connect altough it shows in app as detected.

Is there a patch upcomming for the amp code series?

Greetings

When you activate bluetooth on the amp the code number that is displayed, must it be entered somewhere. I have your app loaded down on a smartab. I press           "scan for amps"  and nothing...all the time no connection...would appreciate some feedback...thanks

I am facing the problem where when I select the bluetooth mode of my stanmore speaker the song plays but no sound comes out from the speaker. While its works perfectly with AUX cable.

kindly suggest , what I should do !! I am based in India (Delhi)

Thanks,

Ishan

is there a way of sending the presets from phone to amp without cable? 

thx

Good day!

January 22, 2018, bought the headphones Marshall Major II bluetooth, but at the first listening found 4 minus:
1) When watching a video from the phone via bluetooth, the audio lags behind from 38-41 seconds of viewing by 0.5-1 seconds, and watching the video immediately loses its meaning.
2) From 1 st to 5 stutterings of music occurs in 1 minute of listening.
3) The left speaker plays a little louder than the right speaker or the right one plays more quietly).
4) Earpiece headphone curve in the photo is noticeable.

Help please solve the problem, is this a warranty case? In the store you can make an exchange for new ones?
I really want to really enjoy the sound of Marshall Major II bluetooth.
Sincerely, Mikhail.
mishachaki@gmail.com

Without google translator

Доброго времени суток!

22.01.2018 года купил наушники Marshall Major II bluetooth, но при первом прослушивании обнаружил 4 минуса:
1) При просмотре видео с телефона по bluetooth идёт отставание звука с 38-41 секунда просмотра на 0.5-1 секунды, и просмотр видео сразу же теряет смысл.
2) От 1-го до 5 заиканий музыки происходит за 1 минуту прослушивания.
3) Левый динамик играет чуть громче, чем правый или же правый играет тише).
4) Дужка наушников кривая на фото это заметно.

Помогите пожалуйста решить проблему, это является гарантийным случаем? В магазине можно сделать обмен на новые?
Уж очень хочется уж по настоящему наслаждаться звуком Marshall Major II bluetooth.
С Уважением, Михаил.
mishachaki@gmail.com

I upgrade to Android 7.0

Bluetooth is ok (blue light fixed) but impossible to connect Gateway to my Code.

It worked with old Android version.

   What can I do?

Hi

when will we get a new update to improve the Bluetooth Connection ?

My Marshall Code 100 Combo Amp is making a ringing noise unless i push the the bluetooth Pair option.. none of the knobs or presets will make it go away.  however if i turn the master volume up all the way it will slowly as the master volume goes up  make the ringing noise quieter.. is it the speaker for the bluetooth or possibly the speakers in general... i literally just bought it and feel like i wasted my money.

I just bought a code 50, downloaded the gateway app and tried to connect it to my galaxy note8.  I find that the app connects my note8 to the amp as an audio player (I can play songs in my note8's music library through the amp) but it will not connect the note8 to the amp as an amp controller.  In other words, I can play music through my amp but not control the amp's settings.  Even though the note8's bluetooth settings shows the amp is paired, the app says it's not connected.  I've followed the instructions found in the code 50 users manual as well as the instruction founs in the app itself several times to no avail.  Can you help please?  Thank you.

I have an iPad 2. I can connect my Code 50 via the iPad's bluetooth settings. It pairs perfectly fine. But when I try to connect to the amp in the Gateway app, nothing happens. I can't see the amp and can't connect to it. Is there a fix for this?

My CODE 50 will pair with my iPad, after some difficulty.

However, all it does is let me hear my email notifications through the CODE! It will NOT pair with Gateway ever!

This is a big deal because access to the amps controls is impossible without a remote connection. I'm sorry, but the control layout is a POS if you must rely on the amp interface. Who sits on their amp when practicing or gigging? The top position was a TERRIBLE IDEA! Fire the idiot(s) who came up with that disaster! The Bluetooth MUST WORK AND BE RELIABLE in order to make this amp useful!

I have followed your tutorials and cannot waste 30+ minutes monkeying around with this junk every time I attempt to use it! I have even deleted and re-installed Gateway with it paired with the ipad with no change.

Look, I don't care if you have Jimmy Page locked up inside this thing, if you cannot offer a solution for the Bluetooth issues, it's going in the bin!

Hi guys,

I've bought to my girlfriend for Christmas wireless headphones Marshall Major II Bluetooth. I can not connect them by bluetooth with any PC (Windows 10). Any of my PC's with Win 10 and BT technology won't see these headphones, although my android smartphone will see them. Is there any trick how to connect those headphones to PC? Is it even possible? I'm not talking about connection via a cable of course.

Thx for answer!

L.

Is it possible that the firmware version that came with amps can be released as an update in order to reset the amp to factory? Maybe this can help with the Bluetooth issue until new firmware can be issued?

my code worked ok with my galaxy 5 but i got a new moto z running android 7.1.1 and it will connect to bluetooth but will not  connect in gateway. when i push scan for amps it never finds the code amp and yes i pushed the bluetooth buttons on the amp.  in the gateway app the in the bottom left corner the amp/phone icon is missing for switching from amp to phone presets. the screen has the blue preset shown but the library has them in yellow.  the worst part is that the display on the code amp is not working. it is barely readable. just yellow with the black barely visable. so without being able to program it using the display it doesn't work with my phone either.  i have owned a lot of marshalls and still have a bunch but i have never been so dissapointed as i am with this piece of crapp. can't use it live because of the dropouts when switching channels and yea i know about using the same amps and settings in all the presets but that is unaceptable. i have the footswitch and thats a disaster too. one little slip like accidently pushing two buttons at the same time or too fast or twice freezes the amp or reprograms it. yea really cool turning it off and back on in the middle of a song.  i tried using it live once and it was a disaster. never again. so i love the tone for recording but now i can't even do that because it wont connect bluetooth and the display is almost dead so i can't program it.

Hello Marshall Team,

i figured out following:

If code25 is in pairing mode (pressing REV/POWER),  you can see that code25 sends a device name ( something like "CODE V02004FA6E") within BT message to phone and phone asks for pairing, all works ok.

after switching power off and on again on code25, code25 sends again BT message but without device name, I guess the phone can't compare the device and thats why the paired connection can't be re-established from phone.

I checked this with BluetoothView v1.66 from NirSoft with win10.

best regards,

Peter

Hello Marshall Team,

I traid pairing with iPhon7 ios 11.2, this works well, can use gateway app with success.

If I switch off BT on my Iphone and later switch on BT, BT connection establishes again and gateway app works.

If I switch off power code25 and later switch power on again, BT connection doesn't come back, no blue led on code25.

According FAQ BT should come back on code25 with same pairing code to re-estrablish the previously paired BT connection.

As workaround I have to delete the BT Device from my iPhone and start BT on code25 (keys REV/POWER on code25) with new pairing.

Is this a known issue ?

please let me know. I have already updated to last FW 1.11/1.41

Thanks and best regards,

Peter

As a recent Marshall code 25 user how long has the bluetooth pairing problem when turning the amp off been goinig on is it when the amp was released or after a firmware update the reason i ask this is i am considering returning the amp if this has been an ongoing problem with no resolution in sight ?

I am connected to my Code 100H via bluetooth and using Marshall Gateway app and trying to play a song using the playback feature and the song will not play. My music library was found and I can pick the songs ok and they appear in playback, but will not play. I just wonder if this has anything to do with Apple Music?

I am using my Ipad and also tried with my Iphone 7.

Frustrating, please help!