Questions
Showing results 341 to 360 of 3523
1

vote

0

answers

1.1k

views

Hello!

 

!!! Ok, my bad. Figured it out. Had to put the amp in pairing more (Rev & Power) - then all is well. Sorry. !!!

(Feel dumb, bt I'll leave this in case someone else has similar issue.)

I had the amp successfully paird with a prior phone (Moto Droid as well - 2 yrs old?) Got a new phone - described above - Android v7. Not able to pair. Have uninstalled the Gateway app, (that got in the way last time, until the phone & amp were paired, then an install / connect went fine). This time... I get a cryptic, possibly IP6 number that looks like a device address. No code to enter, or anything to do. Phone says "Pairing..." waits maybe 10 seconds, then returns with "Pairing..." gone - no message, no nothing. Tried many many times. Cannot "forget the device" - phone doesn't offer a lot of choices: pair or disable Bluetooth is all...

 

Will the Code work with this phone? IS there a trick I hope I don't know? I sort of like the app - although I often use the knobs - it's just easier... So... I'm not going to hate you forever, but have to join the folks that are dissappointed with this. Amps are marvelous, but this software isn't measuring up I'm afraid.

 

Anyway, any help much appreciated!

Thanks

Steve

edited 22 Mar 2017 at 08:34 PM

Steve Noyes (3)

asked 22 Mar 2017 at 07:44 PM

Steve Noyes (3)
1

vote

3

answers

4k

views

hello Marshall Team

sorry but i have a other question!

i want to use the Turner with the Marshall Code Footswitch.

i have the Code 50.

witch buttons on the Pedl i have to push to turn on the Tuner?

maybe i'am blind, but i cant find it, also dont find in the manual...

 

thank you

asked 11 Mar 2017 at 10:01 PM

Maik Satow (1)
1

vote

2

answers

5.1k

views

A number of months ago Marshall responded on this Forum that a simple up/down footswitch would be available Early 2017 for use with the Code 50 Amp, which I own.    I noted that a recent firmware update included files for this pedal and also note that a "PEDL-91010" 2 way Footswitch is "included" with the 100 watt versions of the Code Series Amps.  What about us Legacy Users??   When/Where can I purchase a 2-way pedal, and what is the price?    Thank you!!

asked 20 Feb 2017 at 03:32 AM

S Fisher (6)
1

vote

0

answers

1.3k

views

The first time I connected to my new Code 50 via Bluetooth on my iPad and iPhone there were no issues (2 weeks ago). Went to connect today (2/17/17) and could not with either device. 

1. Went to settings and "forgot device".

2. Shutoff amp and devices, restarted amp and devices.

3. Back to settings, Bluetooth, and paired iPhone to amp. Showed as connected.

4. Opened Gateway changed home screen to amp and tapped to sync. NOTHING!

5. Opened Menu, Code, no amp detected, tapped scan for amps, NOTHING!

Definitely a problem with your Gateway App. Please correct and email me at Olhoss.jarvis@gmail.com when issue is corrected.

if you can't correct problem please forward me the shipping costs so I can return it. The app was the deciding factor for going with the Code 50.

asked 17 Feb 2017 at 10:03 PM

clark jarvis (3)
1

vote

1

answer

2.9k

views

Hallo

Habe mein Galaxy s5mini mit dem Code 50 Gekoppelt und kann auch Musik abspielen.

Auf die Gateway App kann ich allerdings nich zugreifen.

Ich Scane for Amps aber die Meldung Not Conneceded erschein immer wieder auf dem Display.

Habe die App schon neu Installiert,aber leider ohne Erfolg.

Wo liegt der Fehler?

Danke für eine Rückmeldung.

MfG.

Peter

asked 17 Feb 2017 at 03:28 PM

Peter Niederer (1)
1

vote

0

answers

1.1k

views

Hello,

which Pre Amp Model in an Code 50 amp comes closest to a Marshall Major 200W?

Regards,
Torben

edited 08 Jan 2017 at 12:21 AM

Torben Keller (17)

asked 08 Jan 2017 at 12:19 AM

Torben Keller (17)
1

vote

2

answers

1.5k

views

Can I turn the 100 presets off on the CODE amp? I don't want a High gain setting or a looper setting or all of these weird settings I kind of want to just make my own setting, if you will.

I want it to be like a regular amp atm. Is that possible?

asked 06 Jan 2017 at 06:55 PM

Jonathan Rowe (1)
1

vote

0

answers

1.1k

views

I want to change the source for playback (from samsun sound picker to google play).  Initially i had these two choices but now unable to access them.

 

asked 31 Dec 2016 at 05:43 PM

Bruce H (1)
1

vote

1

answer

1.2k

views

hi, how do i add a new preset on a code 50 without using one of the factory installed 100 presets?

asked 25 Dec 2016 at 11:01 PM

joey pinter-bilek (1)
1

vote

1

answer

1.5k

views

So I just got my Code 25 amp and my guitar will show up in a couple days.

Even though my guitar isn't here yet I thought I would have a little bit of fun with it tonight.  One of the features that I really liked about this amp is being able to play music like from your phone through the amp either via Bluetooth or hardwired mini jack.   I did this tonight and to my surprise it sounded horrible! I tweaked the settings on the amp and of course it made no difference because those settings would only affect the guitar input.   I played the music through the music app on my phone then also through the Marshall Gateway app and got the same results. I thought maybe it was because I was doing it via Bluetooth?   But then I hardwired into the amp and it was the exact same issue. I guess there are other ways to listen to music while playing the guitar along with it but I just thought it was a pretty neat feature to have both sound sources coming out of the same speaker but there's no way that's going to happen.   Unless I'm  doing something wrong?

asked 18 Dec 2016 at 01:54 AM

Kevin S (1)
1

vote

1

answer

1.2k

views

Good morning! I bought a Marshall 2555X Silver Jubilee amplifiers! and a Marshall 2551BV Silver Jubilee speaker cabinet. I have tried to register the speaker cabinet! but it does not work. It might just be possible to register amplifiers?

Sincerely, Mikael in Sweden.

asked 15 Dec 2016 at 09:45 AM

Mikael Hagavall (1)
1

vote

1

answer

1.6k

views

Hello,

I obtained a Marshall Haze 40c and was wondering if there were any current-production amp footswitches that mimicked the 4-button footswitch for the amp that is now discontinued? I have seen some on reverb, but they are a bit pricey when shipping is added to the mix. 

Also, im a bit tech-savvy and wouldnt mind making my own. I understand what it takes to make a 2-button channel control, but unsure how to wire a 4-button switch. Any schems out there ?

asked 10 Dec 2016 at 10:03 PM

Adam Bernal (1)
1

vote

1

answer

1.5k

views

Hi,

is it possible to use more than one "stompbox effect" within a preset and how does it wotk??

for example auto wah & compressor

bernd

 

asked 03 Dec 2016 at 09:29 PM

Bernd Herbold (2)
1

vote

0

answers

962

views

Is it possible to gave more that one "pedal effects"  within one preset and how does it work ??

asked 03 Dec 2016 at 05:59 AM

Bernd Herbold (2)
1

vote

1

answer

1.7k

views

Dear All.   When recently reviewing the release notes on Code Firmware Release V1.1 it is indicated that it includes "2-way footswitch support".   Can you please provide a list of what "2-way" footswitches are available for the Code 50 as well as what parameters each of the usable footswitches are able to control/change.   Thank you! 

asked 14 Nov 2016 at 04:24 PM

S Fisher (6)
1

vote

1

answer

1.3k

views

Seems that the JCM-1C 50th anniversary is not in the database for cabinet registration.

SN M-2012-43-0525-1 purchased on April 5, 2014

asked 06 Nov 2016 at 09:07 AM

Emmanuel de Haller (1)
1

vote

1

answer

1.2k

views

The inability to record using USB makes this product close to a sham. A base feature which is broken really insults your users and is killing sales. Get this fixed now, please, before your costs include my solicitor.

asked 18 Oct 2016 at 07:15 PM

James Graham (12)
1

vote

1

answer

1k

views

Hi everyone, 

I've seen a few people comment about some strange audio artifacts at low volume; I'm definitely hearing those as well.  

Do we have any word from Marshall about if this issue will be fixed with a firmware update? 

Also, any ETA on the next firmware update?

asked 16 Oct 2016 at 11:54 PM

Lucas Evanochko (1)
1

vote

1

answer

1.6k

views

Has ther been any or will there be any firmware updates to the code 25 amps? My unit suffers from tinny tones on high strings to annoying dull decaying sounds on low strings, I have tried many set ups but nothing seems to work! Hopefully you will have a firmware update that will correct this as I am getting to the point of not using the amp, and I have only had it a few months!

asked 10 Oct 2016 at 01:11 PM

Carl Forster (4)
1

vote

4

answers

1.4k

views

I'm using Windows 10, and the Amp says "USB" when plugged into PC.  I installed the window app, but all it says is "please connect your Code..,".    I checked device manager and it says " Unknown USB device (device descriptor request failed).   I tried uninstall, reboot, reload, etc., and different USB ports ,but nothing works.   

asked 08 Oct 2016 at 10:02 PM

David Goodrich (1)
Showing results 341 to 360 of 3523
Loading - please wait...