Hi,

Just bought a Code 50 amp, the usb micro connector is broken as the pins are pushed down. Can the connetor be replaced ?

Thanks

As stated above, I'm trying to update my Code 25 to the newest firmware update, but no matter what I do, I can't get it to connect. I have MIDI allowed through Chrome, also tried Microsoft Edge, but both are telling me that my Code isn't connected at the bottom right.

Only thing to try next is to buy a Midi Mini USB cable to see if that fixes the problem, does anyone have any input on this?

Buenas tardes, el día de hoy actualicé mi aplicación gateway y también mi amplificador code 25 mediante USB. Lamentablemente al tratar de cambiar de preset a un preset guardado desde la app se desconecta el Bluetooth.

Por favor, necesito una solución! 

Hey, Guys! I have some prodlems with my amp Marshall CODE25... Idk what is it, but if I turn on, i dont have sound and on display i have this information: Marshall B0.00 M0.00 D.00 CHK USB. And some buttns turn ligts on red or green randomly. So i try to restart settings, but it dosent work. What I can do with this or he was dead((( I think he can burned with hight power. Thk u for support

Hi, 

i just bought my first electric guitar and amp (Code 25). I'have maneged to use my headphones via bluetooth to play. Now i'm trying to record something. So i connected my amp via usb to my pc but i have to use the headphones with cable which is super annoying. Can someone help me? 

Thank you in advance,

Ivan

My gateway app won't connect with my code 50 and the gateway on the pc with usb cable won't do anything either.

First of all, sorry for my bad english. 

I recently buy a Marshal Code 25, anda when I conecct it to the PC with de mini usb cable, i can donwload presets, but just that. I cant hear the guitar in my computer phones. There a posibility to do this? Or its just de way it is.

Another thing, there an interface like Bias fk to interact with the amp?

Thanks

I have a Marshall Code 100h amp, which I've always loved. Now, unfortunately, when I turn it on, after 1-2 minutes the sound slowly fades and disappears completely. It works on USB, so the preamp is probably good. What can I do with it? Is it possible to purchase an end stage panel? Is there any way I can use it again? Thanks in advance.

im using garage band and it records but the issue i have is that it doesnt record my code presets . it doesnt sound the way im hearing it from the amp. if i disable the plug ins it just sounds like electronic mess. if i record just a audio track from usb out from the code it sounds like an electronic sound and not the sound of my amp. i can hear it combine with my amp when i turn the plug ins on put its not what i want. help ?

Good morning, just bought a code 25 after having updated the firmware to version 1.46 the amplifier sounds very low and distorted with a lot of background noise.... i asked the dealer the substitution but even with the new one same thing happened, already tried reset and to overwrite the firmware tried changing the usb micro b cable, and tried on two computers....

what should i do?

thank you in advance.

Can I update the firmware via USB on my code 50 if I use a Mac?

Trying to connect to amp via USB and miniB cable. Unable to connect says code: not connected.

Enabled MIDI still no connection. tried a reset on marshall code 50 amp.

Does not reset for connectivity

PLease help

How do I use the Marshall Code 50 Amp in ProTools with the USB Port?

Hi.

I've tried uploading the firmware on my Marshall Code 25 using the Chrome, Opera and Edge latest browser versions on my Macbook pro 12.3 (Monterey) using a midi usb cable.

When doing the update the amp connects and allows me to click update... it shows the progress to 100% but then gives the error below:

"An error occurred. The update process was not completed. Please try restarting your computer/device, and then try the update process again."

I must have tried this a 100 times with no success.

Now when i resart my amp to play some tunes the display says "CHK USB" and the amp wont work.

This is all very frustrating and i hope someone can assist.

I seem to be having the same issues that a lot of people have reported, where I cannot get the Marshall Gateway app to connect to my Code 25. I've only had the amp for about a week and I cannot get the app to see it. ? 

I can connect to the amp via Bluetooth using my phone (Samsung S10, Android 11) and whilst connected, can use it as a BT speaker to play music from Spotify. However, nothing I do seems to get the app to connect to the amplifier. 

-I've updated the amp to the latest firmware using my laptop/web browser. 
-I've followed all the instructions in the Bluetooth Connectivity Troubleshooter to the letter (CODE - Gateway Bluetooth Connection Troubleshooting - my.marshall.com)

No matter what I do, or what order I install/uninstall/connect, the app will not see the amplifier. Everything works otherwise - I'm able to apply Patches from ? using a USB connection - and the amp sounds great. I'd just like to be able to control it from my phone.

My Code 50 Makes a weird Hissing/Crackling sound when I am using the USB Input on the amp and using it in Reaper, Can anyone please help?

Hello, everyone! I'm looking to buy a Marshall Code 25, and I've heard that plugging a bass guitar into a guitar amp can damage it, therefore I'm wondering if plugging a bass into the amp and recording it through the USB port will harm the guitar amp.

I have tried doing so but the problem I am having is there is about a half a second of audio delay while playing.  I didnt know if an additional audio interface would solve that issue or if the amp itself should handle the traffic well enough. It could also be possible that i need to re-orchestrate how i have all the cabling ran and how i have the audio being played through the amp. I simply have the guitar plugged into amp, amp plugged into pc with micro USB cable provided. I had all the output audio from the computer going to the amp.  The computer being used has over adequate specs to run everything needed.

Thanks for your assistance

Kyle F

Hello when I attempt to connect my Code 25 for a firmware update the device is not recognized. It says USB malfunction. I read a post that says I must use a midi compatible cable. Is there a particular way to identify if the cable is compatible or not. If I search the cables I find do not seem to have the proper connector. Thanks

When I use my marshall on the pc I get really strong buzzing when recording and hearing.

I tryed 3 different cables, and updated the firmware 3 times already.

I'm out of options, this turned to be a nightmare to me.